![Reply](http://www.njfboa.org/forums/images/buttons/reply.gif) |
01-03-2009, 02:12 PM
|
#1
|
Join Date: Dec 2008
Location: Salem, NJ
Posts: 81
|
rims dont fit?
i had ordered some c6 z06 rims from fast toys performance, they were o e concept rims. they are all 17x9.5. The fronts were extremely tight to whatever arm comes like almost straight up, like i couldnt even fit a finger between the rim and that, which idk if thats normal or not. but my main problem is when i put the rims on the back, the hub that actually protrudes through the center of the rim when put on seems to big for the rim. Fast toys says that from 93-96 the hubs were bigger then later years and i should try and grind the center of the wheels bigger to fit, and if it didnt work they would take the wheels back. wtf? why would they take them back after i grinded on them? anyone ever heard of this? sorry for the long post
|
|
|
01-03-2009, 02:58 PM
|
#2
|
Join Date: Jul 2004
Location: West Long Branch
Posts: 13,598
|
Yes, LT1 cars have different sized hubs vs the LS1 cars and vise versa, but I thought that they were all built for the larger hub diameter?
__________________
2/20/2013: They Day the ****s Stopped
|
|
|
01-03-2009, 03:01 PM
|
#3
|
Meet Coordinator
Join Date: Jan 2008
Location: brick/pt. pleasant beach
Posts: 19,341
|
haha yeah i ran into the same thing. i just took a die grinder to the center of my rim till it fit. the lug nuts center the wheel so no worries. watch out for the bump stop though, i had to cut it off with my 10.5" rears.
98-02 fbody wheels are the same when installing on the rear of 93-97 cars.
i wanna see them!!!
btw
Quote:
Originally Posted by BigAls87Z28
Yes, LT1 cars have different sized hubs vs the LS1 cars and vise versa, but I thought that they were all built for the larger hub diameter?
|
not in my travels....
Last edited by sweetbmxrider; 01-03-2009 at 03:03 PM.
|
|
|
01-03-2009, 04:04 PM
|
#4
|
Join Date: Dec 2008
Posts: 23
|
I would not suggest "grinding" a wheel to make the hub fit. That requires actual machine work to be done properly and ensure that the wheel sits properly.
|
|
|
01-03-2009, 04:20 PM
|
#5
|
Meet Coordinator
Join Date: Jan 2008
Location: brick/pt. pleasant beach
Posts: 19,341
|
Quote:
Originally Posted by L8APEX
I would not suggest "grinding" a wheel to make the hub fit. That requires actual machine work to be done properly and ensure that the wheel sits properly.
|
no, the inner diameter of the wheel hub is small for ls1 rear end application. lt1's need to open the center up just a little bit for the wheel to fit on and come off easily. the lug nuts center the wheel on the axle. no worries whatsoever.
|
|
|
01-03-2009, 04:49 PM
|
#6
|
Join Date: Mar 2008
Location: Shreveport Louisianna Barksdale AFB
Posts: 1,415
|
Quote:
Originally Posted by sweetbmxrider
no, the inner diameter of the wheel hub is small for ls1 rear end application. lt1's need to open the center up just a little bit for the wheel to fit on and come off easily. the lug nuts center the wheel on the axle. no worries whatsoever.
|
Hence lug centric wheels
__________________
USAF Jet Propulsion Specialist
![](image.php?u=3318&type=sigpic&dateline=1377484287) 1985 383 Camaro-nothing special I promise ![Wink](http://www.njfboa.org/forums/images/smilies/icon_wink.gif)
2000 NBM z28-also nothing special
|
|
|
01-03-2009, 05:27 PM
|
#7
|
Admin.
Join Date: Aug 2005
Location: Hamilton, NJ
Posts: 20,149
|
Quote:
Originally Posted by Jersyboyy
Hence lug centric wheels
|
which is never as good as hub centric....
__________________
Vent Windows Forever!
The looser the waistband, the deeper the quicksand. Or so I have read.
Feather-light suspension, Konis just couldn't hold. I'm so glad I took a look inside your showroom doors.
Hey everybody, it's good to have you on the Baba-too-da-ba-too-ba-ba-buh-doo-ga-ga-bop-a-dop
|
|
|
01-03-2009, 05:48 PM
|
#8
|
Meet Coordinator
Join Date: Jan 2008
Location: brick/pt. pleasant beach
Posts: 19,341
|
Quote:
Originally Posted by BonzoHansen
which is never as good as hub centric....
|
for street driven, not needed imo
|
|
|
01-05-2009, 10:29 PM
|
#9
|
NJFBOA Co-Founder
Join Date: Jul 2004
Location: All up in your kool aid!
Posts: 12,235
|
Street or track, having the wheel supported by both the lugs and the hub is vastly safer than just laying it on the lugs and hoping it is sitting properly. Hub centric also keeps the wheel centered properly in case a lug falls off.
|
|
|
01-05-2009, 10:52 PM
|
#10
|
12 Second Club
Join Date: Aug 2004
Location: Oradell
Posts: 8,368
|
i had to do this to put the C5 wagon wheels on my 95Z... no big deal at all
__________________
86 Camaro
88 Camaro
95 Impala SS
97 Trans Am WS6
98 Blazer ZR2
00 Corvette
04 CTS-V
07 Sublime Charger Daytona
10 Tahoe SSV
12 Tahoe LT
17 Malibu LT
|
|
|
01-06-2009, 08:03 AM
|
#11
|
Join Date: Dec 2008
Location: Salem, NJ
Posts: 81
|
i think im just sending them back and make sure i order the right size hub next time i order rims
|
|
|
01-06-2009, 08:23 AM
|
#12
|
Join Date: Jul 2008
Location: Columbia
Posts: 928
|
Send them back and order the correct size for your hub. If they don't take them back then have them machined.
|
|
|
01-06-2009, 09:01 AM
|
#13
|
Sliderule / Moderator
Join Date: Oct 2004
Location: Catawissa PA
Posts: 2,294
|
Early 4th gens larger slightly larger hubs, and 93's and early 94s are even a bit larger. When I put the SS wheels on my 93 I had to do some gringing. You're talking very slight! Nothing that is going to result in the strength of the rim. Just take your time and take off only what is needed to get the rim to sit flush on the hub.
I've run my SS rims for over 10 years with drag radials, broke all kinds of driveline parts, and the rims are still good! I just bought 17x11s and they will need to be tweaked as well.
__________________
93Z M6 Black: The 385 Lives! Supercharged, 3-core front mount intercooler, GTP heads, 3:73's, Street twin clutch, Jethot Longtubes, Mufflex 4" catback/spintech, S+W cage, Spohn Suspenion, Yada Yada Yada
1) Build it
2) Race it
3) Break it
4) Repeat!!!
|
|
|
01-06-2009, 03:32 PM
|
#14
|
Join Date: Dec 2008
Location: Salem, NJ
Posts: 81
|
so what size is the hub? the hub size of the rims is 70.3 so what does it need to be?
|
|
|
01-06-2009, 03:48 PM
|
#15
|
Meet Coordinator
Join Date: Jan 2008
Location: brick/pt. pleasant beach
Posts: 19,341
|
probably like 70.5 ![Laughing](http://www.njfboa.org/forums/images/smilies/icon_lol.gif) i dono i'll look around for ya
|
|
|
01-06-2009, 07:12 PM
|
#16
|
11 second club / Moderator
Join Date: Aug 2004
Location: West Berlin, NJ
Posts: 7,148
|
i took my drummel with a sanding drum, and just went around the inside real quickly. nothing major like Pampered said.
Funny thing is ... the 01-02 speedline rims fit on my LT1 no problem. The 93-02 WS6 rims needed grinding. Go figure...
__________________
2001 Trans Am WS6 •SLP Loudmouth II •UMI Suspension •12.857 @ 109.57
1996 Trans Am WS6 •Pacesetter Longtubes •Strange 12 Bolt •Spohn Suspension •11.152 @ 123.85
|
|
|
01-09-2009, 07:27 PM
|
#17
|
Join Date: Oct 2007
Location: Sewell, NJ
Posts: 1,044
|
yea i did it to my old SS ten spokes to fit on the rear. Just use a hand file. Only need to remove a very very small amount.
|
|
|
01-16-2009, 04:03 PM
|
#18
|
Join Date: Jul 2005
Location: Medford, NJ
Posts: 502
|
__________________
1993 Trans Am ---> LT1 bolt ons (Sold)
2002 Firehawk Trans Am ---> SLP 400HP kit, LS6 intake, LS6 block (Sold.... Miss her)
Current Vehicle
2002 Chevy Silverado 1500
2005 GSXR 750 Street Fighter Flat Black Red Rims
|
|
|
01-17-2009, 08:53 AM
|
#19
|
Join Date: Dec 2008
Location: Salem, NJ
Posts: 81
|
Quote:
Originally Posted by ta350
|
thats where i bought them
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
|
|