![Reply](http://www.njfboa.org/forums/images/buttons/reply.gif) |
08-03-2009, 12:32 AM
|
#1
|
Join Date: Aug 2004
Location: North Jersey
Posts: 3,047
|
Wallowed Lug Hole - Problem??
Well, after almost losing this wheel, here's what I've discovered - the lug holes are slightly wallowed out. From the front side, the taper looks pretty good on all 5 holes, but here's how it looks from the back.
Now, the rim is hub-centric, so it fits flush right around the axle hub, and the lugs seem to have a good grip. I was able to torque them down to 100lbs. last night with no issue. I've only driven it a mile, and it didn't seem to have any vibration. Should I be concerned about this wheel?
__________________
Seeya,
Steve R. in North Jersey
'16 Go-Mango Dodge Charger R/T. It's so good to be back in a V8-powered, RWD car!
Former Toy - '88 Monte SS - had lots of mods...
|
|
|
08-03-2009, 07:06 AM
|
#2
|
Join Date: Aug 2007
Location: Long Branch NJ
Posts: 706
|
as long as it doesnt come loose it should hold on fine. Just check the torque every so often. It could have weakened the metal around the lug holes a bit though so i would definitely keep a close eye on it to make sure it doesnt egg out more
__________________
Formerly known as REED!
JSFBOA
Draino?
|
|
|
08-03-2009, 08:04 AM
|
#3
|
Power Member
Join Date: Oct 2007
Location: Milford NJ
Posts: 1,526
|
Quote:
Originally Posted by J.Reed
as long as it doesnt come loose it should hold on fine.
|
really, you dont say
|
|
|
08-03-2009, 08:38 AM
|
#4
|
Admin.
Join Date: Aug 2005
Location: Hamilton, NJ
Posts: 20,149
|
I'd replace the wheel, Steve.
__________________
Vent Windows Forever!
The looser the waistband, the deeper the quicksand. Or so I have read.
Feather-light suspension, Konis just couldn't hold. I'm so glad I took a look inside your showroom doors.
Hey everybody, it's good to have you on the Baba-too-da-ba-too-ba-ba-buh-doo-ga-ga-bop-a-dop
|
|
|
08-03-2009, 07:08 PM
|
#5
|
Join Date: Aug 2004
Location: North Jersey
Posts: 3,047
|
Quote:
Originally Posted by BonzoHansen
I'd replace the wheel, Steve.
|
That's kinda what I was thinking too. I'm looking into what my options are now, since my wheel is discontinued from SLP. Gotta make a phone call to a board member.
__________________
Seeya,
Steve R. in North Jersey
'16 Go-Mango Dodge Charger R/T. It's so good to be back in a V8-powered, RWD car!
Former Toy - '88 Monte SS - had lots of mods...
|
|
|
08-03-2009, 08:11 PM
|
#6
|
Mr Fantastic
Join Date: Aug 2004
Location: West Milford NJ
Posts: 7,917
|
yeah, i'd say replace the wheel. thats from the lugs all being loose and the wheel moving back and forth ever so slightly
__________________
Matt
![This Thread Sucks!](http://www.njfboa.org/forums/images/smilies/thisthreadsuckssign.gif)
B18B1 FTW
|
|
|
08-03-2009, 08:29 PM
|
#7
|
Join Date: Jul 2009
Location: barnegat nj
Posts: 1,340
|
CHECK THE BASE OF YOUR WHEEL STUDS TOO. THEY ARE PROBABLY WORN TO F*&k, HAD THAT HAPPEN A FEW YEARS BACK, IT WORE THE STUDS GOOD ENOUGH THAT 2 WOUND UP SNAPPING A FEW MONTHS LATER.
|
|
|
08-03-2009, 08:41 PM
|
#8
|
Join Date: Aug 2004
Location: North Jersey
Posts: 3,047
|
Quote:
Originally Posted by S.J.SLEEPER
CHECK THE BASE OF YOUR WHEEL STUDS TOO. THEY ARE PROBABLY WORN TO F*&k, HAD THAT HAPPEN A FEW YEARS BACK, IT WORE THE STUDS GOOD ENOUGH THAT 2 WOUND UP SNAPPING A FEW MONTHS LATER.
|
You're right, two of them already snapped. I decided to replace the whole rotor because I didn't know if there was any internal damage to it. New brakes/studs are on!
__________________
Seeya,
Steve R. in North Jersey
'16 Go-Mango Dodge Charger R/T. It's so good to be back in a V8-powered, RWD car!
Former Toy - '88 Monte SS - had lots of mods...
|
|
|
08-03-2009, 10:57 PM
|
#9
|
Join Date: Jul 2008
Location: NJ
Posts: 819
|
I'm assuming they're the 'acorn' style lug nuts as opposed to the 'mag' style. If it were me, I would drive around with it like that provided the wedge part of the lug nut is doing its job. If you lightly torque the lugs down, and try to wiggle the wheel around, you could probably tell if its safe. If it were me I would eventually replace the wheel though.
__________________
|
|
|
08-03-2009, 11:36 PM
|
#10
|
Join Date: Feb 2005
Location: Little Egg Harbor NJ
Posts: 1,175
|
steve time to upgrade your wheels man! maybe its a sign the ZR1's need to go!
__________________
2011 Camaro 1SS Cyber Grey Metallic
2005 Silverado
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
|
|