![Reply](http://www.njfboa.org/forums/images/buttons/reply.gif) |
04-16-2011, 05:27 AM
|
#1
|
Join Date: Nov 2005
Location: Pitman, NJ
Posts: 178
|
anyone have a t56 magnum?
does anyone have the t56 magnum trans? im looking into buying one for my 91 and would like to know if anyone has one of these and how they hold up and how they feel. thanks guys
__________________
|
|
|
10-08-2011, 08:39 AM
|
#2
|
Join Date: Nov 2005
Location: Pitman, NJ
Posts: 178
|
come on guys, someone has to have one of these!!!
__________________
|
|
|
10-08-2011, 03:19 PM
|
#3
|
Admin.
Join Date: Aug 2005
Location: Hamilton, NJ
Posts: 20,149
|
They just came out in the last year and they are.not cheap. I'm not sure anyone here has one. I know of some guys who run them and it seems they are working for them.
As far as holding up they seem to take big hp at least for the auto-x/road race guys.
What are you planning on for hp and what is your intended use?
__________________
Vent Windows Forever!
The looser the waistband, the deeper the quicksand. Or so I have read.
Feather-light suspension, Konis just couldn't hold. I'm so glad I took a look inside your showroom doors.
Hey everybody, it's good to have you on the Baba-too-da-ba-too-ba-ba-buh-doo-ga-ga-bop-a-dop
|
|
|
10-09-2011, 02:34 AM
|
#4
|
Join Date: Nov 2005
Location: Pitman, NJ
Posts: 178
|
well i bought the blueprint 383 block from jegs and the 550 hp top end kit from trick flow. heads at 72cc but im prob going to get a set that are 64cc for some more compression, not exactly sure what hp ill be lookin at. as far as use, just a nice street car that looks good and fast. may run it once or twice just to get some times but dont plan on frequenting the track. more of just a weekend cruiser to the shore.
__________________
|
|
|
10-09-2011, 07:41 AM
|
#5
|
Admin.
Join Date: Aug 2005
Location: Hamilton, NJ
Posts: 20,149
|
I don't think you'll break that trans.
__________________
Vent Windows Forever!
The looser the waistband, the deeper the quicksand. Or so I have read.
Feather-light suspension, Konis just couldn't hold. I'm so glad I took a look inside your showroom doors.
Hey everybody, it's good to have you on the Baba-too-da-ba-too-ba-ba-buh-doo-ga-ga-bop-a-dop
|
|
|
10-09-2011, 10:09 AM
|
#6
|
Join Date: Nov 2005
Location: Pitman, NJ
Posts: 178
|
well, i know i wont break it, im looking for more of an idea of the troubles ill have on install, ive read that the xmember doesnt line up, however i got the spohn crossmember with the tourque arm attached to that, just really lookin to see what problems people have run into on install.
__________________
|
|
|
10-09-2011, 11:56 AM
|
#7
|
Admin.
Join Date: Aug 2005
Location: Hamilton, NJ
Posts: 20,149
|
Oh, that's not what you asked lol
__________________
Vent Windows Forever!
The looser the waistband, the deeper the quicksand. Or so I have read.
Feather-light suspension, Konis just couldn't hold. I'm so glad I took a look inside your showroom doors.
Hey everybody, it's good to have you on the Baba-too-da-ba-too-ba-ba-buh-doo-ga-ga-bop-a-dop
|
|
|
10-09-2011, 07:19 PM
|
#8
|
Power Member
Join Date: Oct 2007
Location: Milford NJ
Posts: 1,526
|
this trans was brought up on TGO a while back. Apparently its derived from the t6060, and has small syncro teeth that can strip during a missed shift or something like that.
Not sure how well it fits into the tunnel since the tail shaft area is pretty large
Last edited by //<86TA>\\; 10-09-2011 at 07:20 PM.
|
|
|
10-09-2011, 07:54 PM
|
#9
|
Ayatollah of Rock N Rolla / Admin
Join Date: Mar 2006
Location: Parts Unknown
Posts: 12,573
|
Quote:
Originally Posted by //<86TA>\\
this trans was brought up on TGO a while back. Apparently its derived from the t6060, and has small syncro teeth that can strip during a missed shift or something like that.
Not sure how well it fits into the tunnel since the tail shaft area is pretty large
|
Yup. T56 Magnum is derived from the 6060 and I think the rating is 750 lb-ft or so?
|
|
|
10-10-2011, 04:43 AM
|
#10
|
Join Date: Nov 2005
Location: Pitman, NJ
Posts: 178
|
well, my apologies on misrepresentation of the question lol, thanks for the input though, just trying to find a good trans that i can bolt right in. was going to go with the lt1 t56 but i was under the impression that it may not hold up too well.
__________________
|
|
|
10-10-2011, 08:03 AM
|
#11
|
Ayatollah of Rock N Rolla / Admin
Join Date: Mar 2006
Location: Parts Unknown
Posts: 12,573
|
Quote:
Originally Posted by 91camaroracer
well, my apologies on misrepresentation of the question lol, thanks for the input though, just trying to find a good trans that i can bolt right in. was going to go with the lt1 t56 but i was under the impression that it may not hold up too well.
|
The 94-97 T56's are still rated at 450 lb-ft and are much cheaper (even upgraded) IIRC.
|
|
|
10-10-2011, 08:42 AM
|
#12
|
Admin.
Join Date: Aug 2005
Location: Hamilton, NJ
Posts: 20,149
|
Quote:
Originally Posted by 91camaroracer
well, my apologies on misrepresentation of the question lol, thanks for the input though, just trying to find a good trans that i can bolt right in. was going to go with the lt1 t56 but i was under the impression that it may not hold up too well.
|
I think you'd be fine with that trans and it may be your best bet for a smooth install, although I do not have experience putting a t56 into a 3rd gen. The torque arm part is the unknown for me.
Worst case is if you have issues down the road you take the trans to bob hanlon and he can make it as strong as a magnum. By then you have it installed and such.
www.hanlonmotorsports.com --->
__________________
Vent Windows Forever!
The looser the waistband, the deeper the quicksand. Or so I have read.
Feather-light suspension, Konis just couldn't hold. I'm so glad I took a look inside your showroom doors.
Hey everybody, it's good to have you on the Baba-too-da-ba-too-ba-ba-buh-doo-ga-ga-bop-a-dop
|
|
|
10-10-2011, 04:05 PM
|
#13
|
Co-Founder / Site Admin
Join Date: Jul 2004
Location: Ewing, NJ
Posts: 22,473
|
The torque arm is a non-issue. AFAIK all 3rd and 4th gen trans mount torque arms are completely interchangeable, so an LT1 T56 in a 3rd gen is no issue.
- Justin
__________________
1999 Camry - Beigemobile DD
2002 Suburban - Wife's DD
2004 Grand Cherokee - Not running / Project / Selling?
|
|
|
10-10-2011, 04:27 PM
|
#14
|
Admin.
Join Date: Aug 2005
Location: Hamilton, NJ
Posts: 20,149
|
So a 4th gen t56 may be a better install than the aftermarket magnum?
__________________
Vent Windows Forever!
The looser the waistband, the deeper the quicksand. Or so I have read.
Feather-light suspension, Konis just couldn't hold. I'm so glad I took a look inside your showroom doors.
Hey everybody, it's good to have you on the Baba-too-da-ba-too-ba-ba-buh-doo-ga-ga-bop-a-dop
|
|
|
10-10-2011, 04:32 PM
|
#15
|
Join Date: Nov 2005
Location: Pitman, NJ
Posts: 178
|
thanks guys, this was the deciding factor for me between the 2, i am just going to go with the lt1 t56. thanks bonzo for the link, im checking out hanlonmotorsports right now.
__________________
|
|
|
10-10-2011, 07:32 PM
|
#16
|
Power Member
Join Date: Oct 2007
Location: Milford NJ
Posts: 1,526
|
at least the t56 is charted territory, unlike the magnum. there are conversion parts available, and do your research bofore buying anything.
the biggest complaint about the t56 on tgo is the lack of a good crossmember for it. Any one with a TA attached, will sit really low, and the good ones from Skulte is no longer available. I think there are some new offerings from hawks though, but its just the crossmember, no TA mount.
Depending on what you are doing with the car, there are some tunnel mounted TA's available that eliminate the need to mount the TA to the trans or the crossmember.
|
|
|
10-11-2011, 01:52 AM
|
#17
|
Join Date: Nov 2005
Location: Pitman, NJ
Posts: 178
|
so with the lt1 t56 will my spohn xmem with TA attached work?
__________________
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
|
|