Need schematic for 93 camaro under dash connection
I need to connect the ground from the transmission speed sensor to a Dakota SGI-5C recalibrator. I know the green/white wire in the 10 pin connector is the signal. Was wondering if one of the other wires could be the sensor ground? Or will I need to run a seperate wire from the trans to the convertot box?
The haynes manual gives no info on this, so does anyone have a "real" shop manual?
__________________
93Z M6 Black: The 385 Lives! Supercharged, 3-core front mount intercooler, GTP heads, 3:73's, Street twin clutch, Jethot Longtubes, Mufflex 4" catback/spintech, S+W cage, Spohn Suspenion, Yada Yada Yada
1) Build it
2) Race it
3) Break it
4) Repeat!!!
Last edited by Pampered-Z; 02-01-2012 at 04:32 PM.
|