 |
05-12-2012, 01:30 AM
|
#1
|
Join Date: Aug 2011
Location: Beachwood, NJ
Posts: 406
|
Fuses keep blowing..
So i finally ran my subs today and got everything hooked up except i ran my remote wire to the fuse box.. I thought everything was okay untill tonight when my gauge lights just shut off, i was then told my tail lights didnt come on either, and sure enough i had blown fuses, i tried replacing them but as soon as i did they blown instantly. Maybe my ground isnt good enough? Any ideas..
__________________
'97 TA 5.7L/A4
sold
|
|
|
|
05-12-2012, 02:01 AM
|
#2
|
Join Date: May 2009
Location: Highland Mills, NY
Posts: 1,915
|
When you blow fuses like that you have a shortes circuit in ky experience
__________________
2000 Camaro SS 610rwhp/570rwtq LS2 440, 12 bolt 3.73, tranzilla t56
|
|
|
|
|
05-12-2012, 08:00 AM
|
#3
|
|
11 second club / Moderator
Join Date: Aug 2004
Location: West Berlin, NJ
Posts: 7,148
|
Your running the blue remote wire to the fuse box? If so .... Why?
__________________
2001 Trans Am WS6 •SLP Loudmouth II •UMI Suspension •12.857 @ 109.57
1996 Trans Am WS6 •Pacesetter Longtubes •Strange 12 Bolt •Spohn Suspension •11.152 @ 123.85
|
|
|
|
|
05-12-2012, 09:24 AM
|
#4
|
|
Meet Coordinator
Join Date: Jan 2008
Location: brick/pt. pleasant beach
Posts: 19,341
|
Most likely one of your wire leads is rubbed through and grounding out aka its touching the body or metal somewhere. Might want to pull the radio and check there. You usually can hook the amp turn on to the power antenna wire so long as it goes up when the headunit is on.
|
|
|
|
|
05-12-2012, 10:22 AM
|
#5
|
|
Ayatollah of Rock N Rolla / Admin
Join Date: Mar 2006
Location: Parts Unknown
Posts: 12,573
|
Go back over your connections for sure. Where did you tap into for your power, etc? Under the hood?
|
|
|
|
|
05-12-2012, 12:37 PM
|
#6
|
Join Date: Aug 2011
Location: Beachwood, NJ
Posts: 406
|
Quote:
Originally Posted by WildBillyT
Go back over your connections for sure. Where did you tap into for your power, etc? Under the hood?
|
Power wire is under the hood, ground is to the bolt by back seat seatbelt.
__________________
'97 TA 5.7L/A4
sold
|
|
|
|
|
05-12-2012, 12:39 PM
|
#7
|
Join Date: Aug 2011
Location: Beachwood, NJ
Posts: 406
|
Quote:
Originally Posted by MyFirstZ
When you blow fuses like that you have a shortes circuit in ky experience
|
Im gunna check it all out again
__________________
'97 TA 5.7L/A4
sold
|
|
|
|
|
05-12-2012, 03:15 PM
|
#8
|
|
Stalker
Join Date: Aug 2004
Posts: 12,077
|
where in the fuse box did you connect it?
a short in the battery cable to amp or its ground wouldn't cause the remote source to short BUT if the load of the remote circuit is too much it will overload the fused circuit. is radio stock?
|
|
|
|
|
05-12-2012, 07:03 PM
|
#9
|
Join Date: Aug 2011
Location: Beachwood, NJ
Posts: 406
|
Quote:
Originally Posted by V
where in the fuse box did you connect it?
a short in the battery cable to amp or its ground wouldn't cause the remote source to short BUT if the load of the remote circuit is too much it will overload the fused circuit. is radio stock?
|
Ran it to the radio fuse, and no its a kentwood flip up monitor.
__________________
'97 TA 5.7L/A4
sold
|
|
|
|
|
05-12-2012, 08:47 PM
|
#10
|
|
Ayatollah of Rock N Rolla / Admin
Join Date: Mar 2006
Location: Parts Unknown
Posts: 12,573
|
Quote:
Originally Posted by V
where in the fuse box did you connect it?
a short in the battery cable to amp or its ground wouldn't cause the remote source to short BUT if the load of the remote circuit is too much it will overload the fused circuit. is radio stock?
|
Yeah, this is what I was thinking. Blowing fuses because of overload.
|
|
|
|
|
05-13-2012, 12:21 AM
|
#11
|
|
Stalker
Join Date: Aug 2004
Posts: 12,077
|
First off, run the remote turn-on to the radio, like it's designed to be. The kenwood will have a wire specifically for it.
Second, if you ever want to run power from the fuse box, the ONLY terminal safe to tap into are the ones labeled "Batt"(for full time power), or "IGN" for ignition activated. Any other circuit is designed only to handle a certain amp draw, anything extra can and usually does affect it negatively.
Once you have the fuse box unmolested, and free of splices, then and only then can you begin to properly diagnose or trace any short. Check to see if you pinched or penetrated any wires in the drivers side harness that runs along the side of the car to the rear while you were doing the install.
Last edited by V; 05-13-2012 at 12:22 AM.
|
|
|
|
|
05-13-2012, 10:14 AM
|
#12
|
Join Date: May 2010
Location: Brick, NJ
Posts: 1,868
|
Yeah I agree 100% with V. I had a cheap kenwood not all that long ago and it had a seperate connection just for the remote turn on for the amp. the fuse box thing is a think of the past for the very reason you are experiencing. your just over loading the fuse box
__________________
Formerly known as blk95formula
86t/a_ram_air on TGO
2018 Silverado 1500
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
|
|
