![Reply](http://www.njfboa.org/forums/images/buttons/reply.gif) |
10-06-2012, 02:54 AM
|
#1
|
Join Date: Jun 2011
Location: Manahawkin New Jersey
Posts: 608
|
T56 popping out of 5th?
Question for you guys, i driving down the parkway and go to put the car into 5th gear and it "pops" out of 5th. 1-4 no problems, i didnt try 6th. So at first im thinking bad clutch, but if that were the case this "poping" out of gear would happen in every gear. So now im thinking internal issue, like a bad fork or key. Anyone else experience this? So I'll start my day checking tranny fluid and grab a magnet to see if any metal attaches to it. I dought its a simple shifter adjustment but I'll kill 10 minutes checking that. Looks like this car might be put away early for winter
__________________
97' Z28, M6 w/ golen engines 396 Lt1, rpm transmission level 6 t56, moser 12 bolt eaton posi w/ 4.11 gears, Hooker super comp long tube headers ory-pipe, slp loudmouth 1 .Full BMR suspension, Bilstein shocks. Torqhead 24x conversion.
02' SS, M6 BMR lowering springs, adj. pan-hard bar, Bilstein shocks. Lt1 front end conversion. Ford 9"
|
|
|
10-06-2012, 08:43 AM
|
#2
|
Meet Coordinator
Join Date: Jan 2008
Location: brick/pt. pleasant beach
Posts: 19,341
|
Sounds like an internal issue. Probably worn synchros but it needs to be torn down in my opinion.
|
|
|
10-06-2012, 12:42 PM
|
#3
|
Ayatollah of Rock N Rolla / Admin
Join Date: Mar 2006
Location: Parts Unknown
Posts: 12,573
|
Quote:
Originally Posted by bigz28man
Question for you guys, i driving down the parkway and go to put the car into 5th gear and it "pops" out of 5th. 1-4 no problems, i didnt try 6th. So at first im thinking bad clutch, but if that were the case this "poping" out of gear would happen in every gear. So now im thinking internal issue, like a bad fork or key. Anyone else experience this? So I'll start my day checking tranny fluid and grab a magnet to see if any metal attaches to it. I dought its a simple shifter adjustment but I'll kill 10 minutes checking that. Looks like this car might be put away early for winter ![Good Grief](http://www.njfboa.org/forums/images/smilies/facepalm.gif)
|
Well, what shifter do you have? Does it have external stops? If you adjust them wrong this is what you get.
|
|
|
10-06-2012, 06:37 PM
|
#4
|
Join Date: Jun 2011
Location: Manahawkin New Jersey
Posts: 608
|
its a hurst shifter
__________________
97' Z28, M6 w/ golen engines 396 Lt1, rpm transmission level 6 t56, moser 12 bolt eaton posi w/ 4.11 gears, Hooker super comp long tube headers ory-pipe, slp loudmouth 1 .Full BMR suspension, Bilstein shocks. Torqhead 24x conversion.
02' SS, M6 BMR lowering springs, adj. pan-hard bar, Bilstein shocks. Lt1 front end conversion. Ford 9"
|
|
|
10-08-2012, 11:18 AM
|
#5
|
Ayatollah of Rock N Rolla / Admin
Join Date: Mar 2006
Location: Parts Unknown
Posts: 12,573
|
There are two types of Hurst. Factory non-adjustable and Billet-Plus adjustable.
|
|
|
10-08-2012, 02:09 PM
|
#6
|
Join Date: Jun 2011
Location: Manahawkin New Jersey
Posts: 608
|
Its the factory, non adjustable. I have the billet one for the Z. The fluid seemed alittle darker then what i was expecting but i drained the fluid and ran a magnet to it....nothing. put new fluid in, started car and put the car in every gear, held every gear while being stationary. I'll run the car down the parkway from exit 63 to 67 and see if it holds 5th.
__________________
97' Z28, M6 w/ golen engines 396 Lt1, rpm transmission level 6 t56, moser 12 bolt eaton posi w/ 4.11 gears, Hooker super comp long tube headers ory-pipe, slp loudmouth 1 .Full BMR suspension, Bilstein shocks. Torqhead 24x conversion.
02' SS, M6 BMR lowering springs, adj. pan-hard bar, Bilstein shocks. Lt1 front end conversion. Ford 9"
Last edited by bigz28man; 10-08-2012 at 02:10 PM.
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
|
|