![Reply](http://www.njfboa.org/forums/images/buttons/reply.gif) |
01-27-2014, 07:55 PM
|
#1
|
Join Date: May 2007
Location: Jim Thorpe PA
Posts: 2,132
|
Wheel adaptor/spacer question
Looking at some zr1's or zo6 wheels for my 71 El Camino. Got some c5 brakes going on it and need some wheels. Anyways, in order to run either wheel I need to use a 2in adapter on the front and a 2.5in adapter on the rear. Anyone ever successfully run a setup like that for a long period of time or is a spacer that big just asking for trouble?
__________________
01 SS 383 stroker, Magnum F, 9in.
86 Trans-Am 355 t56
|
|
|
01-28-2014, 06:44 AM
|
#2
|
Join Date: Oct 2009
Location: West Milford
Posts: 1,026
|
On a daily driver I wouldn't recommend it however I know plenty of guys that run that size of spacer/adptr for the exact same setup you have. Want you need to source is a quality billet one and to periodically check/torque them to make sure they are w/in spec. Check for any issues from time to time. One downfall is the amt of rolling mass/weight you will have by running these though.
__________________
1991 Camaro
1992 L98/ttop Firehawk tribute (sold)
2006 Srt-10 Viper
2012 z-71
2011 Equinox (family vehicle)
Last edited by 1320B4U; 01-28-2014 at 11:35 AM.
|
|
|
01-28-2014, 07:26 AM
|
#3
|
Admin.
Join Date: Aug 2005
Location: Hamilton, NJ
Posts: 20,150
|
you want adapters, not spacers. there are plenty of folks running adapters w/o a problem. i would suggest hub centric ones.
__________________
Vent Windows Forever!
The looser the waistband, the deeper the quicksand. Or so I have read.
Feather-light suspension, Konis just couldn't hold. I'm so glad I took a look inside your showroom doors.
Hey everybody, it's good to have you on the Baba-too-da-ba-too-ba-ba-buh-doo-ga-ga-bop-a-dop
|
|
|
01-28-2014, 08:00 AM
|
#4
|
Join Date: Dec 2009
Location: milltown
Posts: 1,497
|
Quote:
Originally Posted by BonzoHansen
you want adapters, not spacers. there are plenty of folks running adapters w/o a problem. i would suggest hub centric ones.
|
this.... MANY people run adaptors, I haven't heard of any failures when used properly. I have seen big turbo LSX third gens running 2.5ins all around with no trouble, including drags and road races. to me they just look unsafe to the eye, it's really a shocker when you see it mounted. hardened wheel studs would be nice too
__________________
2002 Camaro Sunset Orange Mettalic, V6, 5spd, bilstein HD shocks and struts, eibach pro lowering kit, eibach f/r sway bars, lakewood PHB, UMI 2 point subframe connectors, energy suspensions poly master bushing kit
daily econobox and first car
1986 IROC-Z, T56, MGW shifter, Heads, Cam, Holley Stealth Ram 350, t-top, tubular LCA with relo brackets, adjustable PHB, belltech sway bars, ground control weight jacks, SLP mid length headers, 3in w/borla XR1, RIP 3 10 bolts, 12.7 @ 109 so far.. atleast its faster than stock SOLD
1971 Camaro LS3/T56/9in, cam only and still carbed, RIP 2 10 bolts, 11.62@121
03 Blazer 2 door - salt sponge
|
|
|
01-28-2014, 08:51 AM
|
#5
|
Meet Coordinator
Join Date: Jan 2008
Location: brick/pt. pleasant beach
Posts: 19,341
|
Jeeps run adapters all the time.
|
|
|
01-28-2014, 11:10 AM
|
#6
|
Ayatollah of Rock N Rolla / Admin
Join Date: Mar 2006
Location: Parts Unknown
Posts: 12,573
|
Quote:
Originally Posted by BonzoHansen
you want adapters, not spacers. there are plenty of folks running adapters w/o a problem. i would suggest hub centric ones.
|
Agreed. Adapters are what you want.
|
|
|
01-28-2014, 12:27 PM
|
#7
|
11 Second Club
Join Date: Feb 2008
Location: Edison, NJ
Posts: 4,619
|
I use adapters on my G... no problems in 20000 miles.
__________________
1999 Z28 Convertible. 6 speed swap, wide cowl hood, full hockey stripes, and a whining 10 bolt.
2008 Sierra Vortec Max. 6.2 swapped, headers, Magnaflow catback, GMPP CAI, NHT optioned tow package.
2006 GTO, 11.48 @ 118.3
|
|
|
01-28-2014, 09:19 PM
|
#8
|
Join Date: Jul 2004
Location: West Long Branch
Posts: 13,598
|
What everyone said, but make sure you check what size you need after you do the brakes. The C5 upgrade might change the backspacing/offset of the wheel.
__________________
2/20/2013: They Day the ****s Stopped
|
|
|
01-29-2014, 09:11 AM
|
#9
|
Join Date: May 2007
Location: Jim Thorpe PA
Posts: 2,132
|
Quote:
Originally Posted by BigAls87Z28
What everyone said, but make sure you check what size you need after you do the brakes. The C5 upgrade might change the backspacing/offset of the wheel.
|
I know I need 17's to clear the fronts. I was thinking of running 17x9 soft 8's and blacking out the trim. I have the tool to measure so I'll double check once the brakes go on
__________________
01 SS 383 stroker, Magnum F, 9in.
86 Trans-Am 355 t56
Last edited by B4C; 01-29-2014 at 09:19 AM.
|
|
|
01-29-2014, 10:27 AM
|
#10
|
Join Date: May 2012
Location: Bridgewater, NJ
Posts: 835
|
Quote:
Originally Posted by B4C
I know I need 17's to clear the fronts. I was thinking of running 17x9 soft 8's and blacking out the trim. I have the tool to measure so I'll double check once the brakes go on
|
I want you to be aware that Soft 8's weigh a ton - a 17" x 9" is going to weigh 35lbs or more each! Strong, yes, cheap yes, too heavy - yes.
__________________
1984 Camaro: 350 Auto, Global West Suspension, Baer Brakes, CTW Wheels
1989 GTA: Bolt-on L98. Global West Suspension, full Magnaflow exhaust, Wilwood Brakes, CTW Wheels
|
|
|
01-29-2014, 10:36 AM
|
#11
|
Ayatollah of Rock N Rolla / Admin
Join Date: Mar 2006
Location: Parts Unknown
Posts: 12,573
|
Quote:
Originally Posted by B4C
I know I need 17's to clear the fronts. I was thinking of running 17x9 soft 8's and blacking out the trim. I have the tool to measure so I'll double check once the brakes go on
|
I had considered running them on my Nova for a split second. I urge you to reconsider.
|
|
|
01-29-2014, 11:15 AM
|
#12
|
Admin.
Join Date: Aug 2005
Location: Hamilton, NJ
Posts: 20,150
|
soft 8s, the cheap ass big wheel choice of the internet. when not in use they could anchor a battleship.
__________________
Vent Windows Forever!
The looser the waistband, the deeper the quicksand. Or so I have read.
Feather-light suspension, Konis just couldn't hold. I'm so glad I took a look inside your showroom doors.
Hey everybody, it's good to have you on the Baba-too-da-ba-too-ba-ba-buh-doo-ga-ga-bop-a-dop
|
|
|
01-29-2014, 11:39 AM
|
#13
|
Join Date: May 2007
Location: Jim Thorpe PA
Posts: 2,132
|
Quote:
Originally Posted by Paul Huryk
I want you to be aware that Soft 8's weigh a ton - a 17" x 9" is going to weigh 35lbs or more each! Strong, yes, cheap yes, too heavy - yes.
|
Quote:
Originally Posted by WildBillyT
I had considered running them on my Nova for a split second. I urge you to reconsider.
|
Quote:
Originally Posted by BonzoHansen
soft 8s, the cheap ass big wheel choice of the internet. when not in use they could anchor a battleship.
|
They are cheap and heavy. I'm not sure I want to deal with 40 lug nuts lol. It's not a race car just a cruiser and parts hauler.
__________________
01 SS 383 stroker, Magnum F, 9in.
86 Trans-Am 355 t56
|
|
|
01-29-2014, 09:34 PM
|
#14
|
Join Date: May 2007
Location: Jim Thorpe PA
Posts: 2,132
|
I just looked up the weight, a 17x9 is 40lbs without the tire....yikes.
__________________
01 SS 383 stroker, Magnum F, 9in.
86 Trans-Am 355 t56
Last edited by B4C; 01-29-2014 at 09:34 PM.
|
|
|
01-29-2014, 09:46 PM
|
#15
|
Admin.
Join Date: Aug 2005
Location: Hamilton, NJ
Posts: 20,150
|
Quote:
Originally Posted by B4C
They are cheap and heavy. I'm not sure I want to deal with 40 lug nuts lol. It's not a race car just a cruiser and parts hauler.
|
how often do you plan to remove the rotors? you don't have to remove the spacers to remove the wheels.
__________________
Vent Windows Forever!
The looser the waistband, the deeper the quicksand. Or so I have read.
Feather-light suspension, Konis just couldn't hold. I'm so glad I took a look inside your showroom doors.
Hey everybody, it's good to have you on the Baba-too-da-ba-too-ba-ba-buh-doo-ga-ga-bop-a-dop
|
|
|
01-31-2014, 02:36 PM
|
#16
|
Join Date: May 2007
Location: Jim Thorpe PA
Posts: 2,132
|
Found some hub centric and wheel centric adapters on ebay, going to go that route with c5 magnesium wheels
__________________
01 SS 383 stroker, Magnum F, 9in.
86 Trans-Am 355 t56
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
|
|