![Reply](http://www.njfboa.org/forums/images/buttons/reply.gif) |
12-22-2015, 02:26 PM
|
#1
|
Join Date: Feb 2008
Posts: 170
|
Quick Tunnel Mount TQ arm Ques.
So I installed a BMR Tunnel mount TQ arm on my 02 SS M6. While doing the install, I had swapped the rear to a 9", as well as new D/S, and sway bar. During break in and what not, I noticed a large difference when i went over bumps (something I expected). However, there's a lot of noise when I hit bumps and crap, I assume that all has to do with the new TQ arm location and poly mount for the arm.
So my question is this:
Is this normal? Does your Tunnel Mount TQ Arm make a ton of noise also?
__________________
![](image.php?s=e510f51baec448a8ce00aee932af4597&u=3263&type=sigpic&dateline=1372015437)
2002 Camaro SS H/C/I 9" 413/398 [Lola]
2016 Dodge Durango [Kat]
2007 Honda CRF-80 [Little Toni]
2014 Ducati 1199 Panigale R [Luci]
|
|
|
12-22-2015, 02:41 PM
|
#2
|
Mongo the Meet Coordinator
Join Date: May 2008
Posts: 16,899
|
Check the rear area of the bar where it mounts to the rear end, Fbods are notorious for that area needing clearance. Otherwise the mount will smack into the underbody.
__________________
Quote:
Originally Posted by KirkEvil
repo bigals turd gen and part it out to a loving home
|
|
|
|
12-22-2015, 02:50 PM
|
#3
|
Lord of the rings / 10 Second Club / Meet Coordinator
Join Date: Aug 2004
Location: Millstone Township, NJ
Posts: 6,357
|
What type of noise is it? A thump or something else. As mentioned, some clearancing may be needed otherwise it will smack the underbody.
__________________
97 T/A Ram Air Convt
Forever dyno queen / 777rwhp 662 rwtq @ 17lbs / 10.2 @ 140
'24 Corvette Z06
17 Sierra 2500HD Dmax
81 Turbo TA
|
|
|
12-22-2015, 02:52 PM
|
#4
|
Join Date: Dec 2009
Location: milltown
Posts: 1,497
|
Quote:
Originally Posted by LTb1ow
Check the rear area of the bar where it mounts to the rear end, Fbods are notorious for that area needing clearance. Otherwise the mount will smack into the underbody.
|
this.. especially with 9in rears. quite common mostly with Mosers from what ive read.
__________________
2002 Camaro Sunset Orange Mettalic, V6, 5spd, bilstein HD shocks and struts, eibach pro lowering kit, eibach f/r sway bars, lakewood PHB, UMI 2 point subframe connectors, energy suspensions poly master bushing kit
daily econobox and first car
1986 IROC-Z, T56, MGW shifter, Heads, Cam, Holley Stealth Ram 350, t-top, tubular LCA with relo brackets, adjustable PHB, belltech sway bars, ground control weight jacks, SLP mid length headers, 3in w/borla XR1, RIP 3 10 bolts, 12.7 @ 109 so far.. atleast its faster than stock SOLD
1971 Camaro LS3/T56/9in, cam only and still carbed, RIP 2 10 bolts, 11.62@121
03 Blazer 2 door - salt sponge
|
|
|
12-22-2015, 03:41 PM
|
#5
|
Join Date: Feb 2008
Posts: 170
|
I did do some clearancing by way of removing the seat belt for the drivers side (that's where the Arm was hitting) I also did some BFH work around where that anchor is, ill have to look further. So are you saying there wasn't an incredibly noticeable difference while swapping from stock to the tunnel mount?
__________________
![](image.php?s=e510f51baec448a8ce00aee932af4597&u=3263&type=sigpic&dateline=1372015437)
2002 Camaro SS H/C/I 9" 413/398 [Lola]
2016 Dodge Durango [Kat]
2007 Honda CRF-80 [Little Toni]
2014 Ducati 1199 Panigale R [Luci]
|
|
|
12-22-2015, 04:17 PM
|
#6
|
Meet Coordinator
Join Date: Jan 2008
Location: brick/pt. pleasant beach
Posts: 19,341
|
That torque arm nails the trans tunnel over big bumps. If you are using the outer holes on the torque arm effectively pushing it further from the rear, you can cut the mount so only the inner holes remain thus pulling the torque arm closer to the rear and gaining more clearance from the body.
|
|
|
12-28-2015, 02:22 PM
|
#7
|
Join Date: Feb 2008
Posts: 170
|
I did cut out those outer holes. Im pretty convinced its contacting the tunnel and causing the loud bang. Unfortunately, my fathers truck has made its home in the garage so my diagnosing is at a standstill.
__________________
![](image.php?s=e510f51baec448a8ce00aee932af4597&u=3263&type=sigpic&dateline=1372015437)
2002 Camaro SS H/C/I 9" 413/398 [Lola]
2016 Dodge Durango [Kat]
2007 Honda CRF-80 [Little Toni]
2014 Ducati 1199 Panigale R [Luci]
|
|
|
12-28-2015, 03:53 PM
|
#8
|
11 Second Club
Join Date: Feb 2008
Location: Edison, NJ
Posts: 4,619
|
Is the sway bar touching the rear in any way?
__________________
1999 Z28 Convertible. 6 speed swap, wide cowl hood, full hockey stripes, and a whining 10 bolt.
2008 Sierra Vortec Max. 6.2 swapped, headers, Magnaflow catback, GMPP CAI, NHT optioned tow package.
2006 GTO, 11.48 @ 118.3
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
|
|