 |
12-31-2015, 03:37 AM
|
#1
|
Join Date: Mar 2009
Location: Hatboro,PA
Posts: 18
|
Parting out an 86 Z28 305 TPI
Parting out a 1986 Camaro Z28 . Motor is a 305 TPI with a mild cam. Motor runs excellent. Motor has rougly 50k miles on it. No smoke or leaks. Motor has the "good" # 416 casting 305 heads on it. Other mods are HEI distributor with Accel Super coil and Accel wires. MSD 6AL ignition box, Edelbrock headers and y-pipe with aftermarket catalytic converte, 2.5 " exhaust with Flowmaster muffler, aluminum water pump, newer injectors, aluminum pulleys and chrome valve covers. Trans is a 700 R4 ( was rebuilt but now stuck in first gear ). Finally it has a 10 bolt posi drum brake with 3.73 gears. Also has Air Lift bags in rear coil springs to help with traction at the track. Car went consistent 14.1-14.2 at Atco the couple times it was taken. Have video of car running I can text to you. Motor is currently in the car so you can hear it run. Prices are the following:
3) 305 TPI motor sold as long block $375
4) 700 r4 trans ( good for a core. may be fixable w/o a full rebuild) $85
8) overhead interior console $50
15) set of (4) 15" gray Z28 5 spoke wheels with tires. Wheels are in good shape. No curb rash. Tires need to be replaced. $150
this is not a total part out. Not selling any other body parts. May sell some interior parts)
Car will be sold as roller once these parts are sold. Would make good race car. Floors and 1/4s are rock solid. Needs some body work.
Last edited by dpmalibu; 01-24-2016 at 02:13 PM.
|
|
|
|
12-31-2015, 06:33 PM
|
#2
|
Join Date: Mar 2009
Location: Hatboro,PA
Posts: 18
|
|
|
|
|
|
12-31-2015, 06:34 PM
|
#3
|
Join Date: Mar 2009
Location: Hatboro,PA
Posts: 18
|
|
|
|
|
|
12-31-2015, 06:35 PM
|
#4
|
Join Date: Mar 2009
Location: Hatboro,PA
Posts: 18
|
|
|
|
|
|
12-31-2015, 06:39 PM
|
#5
|
Join Date: Mar 2009
Location: Hatboro,PA
Posts: 18
|
Have a few time slips from Atco fastest one is 14.31 @ 95 mph with 1.97 60 ft.
|
|
|
|
|
01-06-2016, 09:25 AM
|
#6
|
Join Date: Oct 2008
Posts: 586
|
Steering box and pump?
|
|
|
|
|
01-07-2016, 07:53 PM
|
#7
|
Join Date: Mar 2009
Location: Hatboro,PA
Posts: 18
|
I have the power steering pump $20
If I strip the car all the way I will let you know about the steering box
|
|
|
|
|
01-08-2016, 02:16 PM
|
#8
|
Join Date: Oct 2008
Posts: 586
|
Box is main part of interest. Just need pump for the valve in the rear to go with the box.
|
|
|
|
|
01-10-2016, 06:23 PM
|
#9
|
Join Date: Mar 2009
Location: Hatboro,PA
Posts: 18
|
PS pump is off if you want it. Sale pending on the roller can't tale the steering box off.
|
|
|
|
|
01-12-2016, 09:38 AM
|
#10
|
Join Date: Sep 2007
Location: Hamilton N.J.
Posts: 29
|
$40 for those billet pullies and belts? the 3 in the engine pic
-Rich 609-658-5510
__________________
 2011 CORVETTE 4LT, loaded with EVERY option, chrome wheels, carbon fiber interior, HUD, etc. Intake, exhaust, and tune. More to come. 
|
|
|
|
|
01-14-2016, 01:18 AM
|
#11
|
Join Date: Mar 2009
Location: Hatboro,PA
Posts: 18
|
I'd take $60
|
|
|
|
|
01-19-2016, 09:42 AM
|
#12
|
Join Date: Mar 2009
Location: Hatboro,PA
Posts: 18
|
Bump
|
|
|
|
|
02-01-2016, 09:32 PM
|
#13
|
Join Date: Sep 2007
Location: Hamilton N.J.
Posts: 29
|
whats left?
__________________
2011 CORVETTE 4LT, loaded with EVERY option, chrome wheels, carbon fiber interior, HUD, etc. Intake, exhaust, and tune. More to come.
|
|
|
|
|
02-02-2016, 07:43 AM
|
#14
|
Join Date: Mar 2009
Location: Hatboro,PA
Posts: 18
|
305 motor and 700 R4 that needs to be gone through. Car is sold.
|
|
|
|
|
02-02-2016, 02:17 PM
|
#15
|
|
13 Second Club
Join Date: Sep 2005
Location: Oceanside, New York
Posts: 557
|
Condition and miles on motor? My 305 tpi in my 86 is seized. thinking this may be a viable replacement.
Nevermind, I actually read the post. very interested.
__________________
1986 Pontiac TransAm
Drop in K&n, Flowmaster 80 Series, SEIZED 305
2001 Camaro SLP SS - SOLD
2010 2SS/RS Camaro
TSP LT's / !Cats / !Resonator / !Mufflers / Airraid CAI / Hurst 46% Short Throw
Last edited by TransAm619; 02-02-2016 at 02:18 PM.
Reason: im a dum dum
|
|
|
|
|
02-02-2016, 06:22 PM
|
#16
|
Join Date: Mar 2009
Location: Hatboro,PA
Posts: 18
|
Pmed you my phone number
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
|
|
