 |
10-21-2017, 01:18 PM
|
#1
|
Join Date: Sep 2008
Location: Hackettstown, NJ
Posts: 1,643
|
LS Rocker Arms
So, question time:
Parts pile for snowtime heads/cam swap is growing. I have a rocker arm question:
I have the stock rockers that are currently on the car. I know the stock roller bearings like to puke out and infest the motor, so obviously they must change.
I also have a set of 'heavy duty' replacements I bought new f rom a vendor on LS1Tech a few years ago. They look ok, different bearing design from the factory rockers. Still needle bearings but maybe secured a bit better.
The latest trend being run by the cool kids are a bushing replacement on the stock rockers, like these. My question is: do I run the new but unknown durability heavy duty ones I bought, or upgrade the stockers?
I'd prefer quiet and bulletproof.
__________________
1998 Z-28 - SLP lid - Ported TB - LS6 Intake - Dynatech SS headers/Catted Y - Magnaflow Exh - 3.42 - Yank SS3600 - UMI weld-in subframe connectors, Adj LCA, Adj PHB, Q1A TA - Bolt-in Relocation Brackets - Strano springs - Koni shocks - 17" C6Z06 wheels - 326HP/335ft-lbs - 12.35 @ 110.41
Quote:
Originally Posted by Blackbirdws6
I can appreciate a dream but this person needed some real friends.
|
|
|
|
|
10-21-2017, 05:55 PM
|
#2
|
|
11 sec club
Join Date: Aug 2014
Location: Woodbridge
Posts: 834
|
I did the upgrade when I swapped to dual springs on my last set of heads. It is very easy to do. I still have my set if you are looking for a set already done. My TF215s came with roller rockers so I used those.
__________________
99 Z28 Trick Flow 215s milled to 61cc 228/232 Cam Fast 102 built 4l65e trans 4000 converter 12 bolt 410s Electric WP deleted PS/AC Dyno & Track tuned
2015 ATS Coupe. AWD 2.0 Turbo
2012 2500hd Silverado with LTZ 20s on 35x12.5x20
86 Buick GN Lesabre 1 of 117 (4-Sale)
Last edited by MDSheds_SS; 10-21-2017 at 05:57 PM.
|
|
|
|
|
10-21-2017, 06:32 PM
|
#3
|
|
Power Member / trans break does not equal transbrake
Join Date: May 2009
Location: The Meadowlands
Posts: 4,513
|
Coming from someone who always seems to end up with unknown condition/strength items, just do the trunion upgrade on the stockers and sell those other ones to offset cost. Or pick up that set from the Shed Master
__________________
99 Z28 - SBE LS1/60e
Motor - 10.84 @ 128 - 1.47 60'
Nitrous - 10.16 @ 132 - 1.40 60"
|
|
|
|
|
10-21-2017, 07:25 PM
|
#4
|
Join Date: Sep 2008
Location: Hackettstown, NJ
Posts: 1,643
|
Sheds, you have the bushing upgraded ones? Not the comp cams bearing? If so, shoot me a PM and let me know what you want for 'em.
Beggs, when I bought them, they seemed like a good idea at the time! At least they're new. 
__________________
1998 Z-28 - SLP lid - Ported TB - LS6 Intake - Dynatech SS headers/Catted Y - Magnaflow Exh - 3.42 - Yank SS3600 - UMI weld-in subframe connectors, Adj LCA, Adj PHB, Q1A TA - Bolt-in Relocation Brackets - Strano springs - Koni shocks - 17" C6Z06 wheels - 326HP/335ft-lbs - 12.35 @ 110.41
Quote:
Originally Posted by Blackbirdws6
I can appreciate a dream but this person needed some real friends.
|
|
|
|
|
|
10-26-2017, 05:54 PM
|
#5
|
Join Date: Sep 2008
Location: Hackettstown, NJ
Posts: 1,643
|
So I decided to pull out the ones I bought a few years ago.
I'm not 'feeling' them.
Might get the Strano BTR Straub bushing upgrades for my stockers.
__________________
1998 Z-28 - SLP lid - Ported TB - LS6 Intake - Dynatech SS headers/Catted Y - Magnaflow Exh - 3.42 - Yank SS3600 - UMI weld-in subframe connectors, Adj LCA, Adj PHB, Q1A TA - Bolt-in Relocation Brackets - Strano springs - Koni shocks - 17" C6Z06 wheels - 326HP/335ft-lbs - 12.35 @ 110.41
Quote:
Originally Posted by Blackbirdws6
I can appreciate a dream but this person needed some real friends.
|
Last edited by The_Bishop; 10-28-2017 at 07:27 AM.
Reason: User Stupidity
|
|
|
|
|
10-26-2017, 06:35 PM
|
#6
|
|
Ebearnezer Scrooge/Power Member/Lips
Join Date: May 2006
Location: Hamilton, Mercer county
Posts: 4,141
|
Quote:
Originally Posted by The_Bishop
Might get the Strano bushing upgrades for my stockers.
|
Why not the Comp replacement fulcrums?
|
|
|
|
|
10-26-2017, 06:38 PM
|
#7
|
|
10 Second Club
Join Date: Feb 2008
Location: Eatontown
Posts: 1,647
|
Those look very similar to the stock design, where the bearing case for the rollers can split apart and shat them out.
The comp cams and BTR kits have larger, stepped trunions and snap ring retainers on the ends to prevent that from happening. Those kits can be had for ~$120. Ive assembled over 40 sets of them and never had any problems.
Ive never tried the bushing kits, but I know straub makes the same thing as strano for about $160 vs $200.
http://www.ws6project.com/user_stor/...oducts_id=8252
__________________
1999 C5 FRC: 12.7@114
2008 TBSS: 12.48@108
2017 Silverado 2500 do you even lift breh?
|
|
|
|
|
10-26-2017, 06:46 PM
|
#8
|
Join Date: Sep 2008
Location: Hackettstown, NJ
Posts: 1,643
|
I'm retarded. Not 'Strano'. Brian Tooley. These Straub. These, to be more precise.
The BTR ones are $115 vs. $159.
Bear: The comp fulcrums have had issues with brinelling and wear, and tend to be a little noisy.
__________________
1998 Z-28 - SLP lid - Ported TB - LS6 Intake - Dynatech SS headers/Catted Y - Magnaflow Exh - 3.42 - Yank SS3600 - UMI weld-in subframe connectors, Adj LCA, Adj PHB, Q1A TA - Bolt-in Relocation Brackets - Strano springs - Koni shocks - 17" C6Z06 wheels - 326HP/335ft-lbs - 12.35 @ 110.41
Quote:
Originally Posted by Blackbirdws6
I can appreciate a dream but this person needed some real friends.
|
Last edited by The_Bishop; 10-28-2017 at 07:30 AM.
Reason: User is retarded.
|
|
|
|
|
10-26-2017, 07:16 PM
|
#9
|
|
Ebearnezer Scrooge/Power Member/Lips
Join Date: May 2006
Location: Hamilton, Mercer county
Posts: 4,141
|
Quote:
Originally Posted by The_Bishop
Bear: The comp fulcrums have had issues with brinelling and wear, and tend to be a little noisy.
|
OK, thanks
|
|
|
|
|
10-27-2017, 03:36 PM
|
#10
|
Join Date: Sep 2008
Location: Hackettstown, NJ
Posts: 1,643
|
Ok, so I decided to spend an extra $40 and go for the Straub bushing kit. I figure I can sell the other 'new' rockers and make up some of the $$.
__________________
1998 Z-28 - SLP lid - Ported TB - LS6 Intake - Dynatech SS headers/Catted Y - Magnaflow Exh - 3.42 - Yank SS3600 - UMI weld-in subframe connectors, Adj LCA, Adj PHB, Q1A TA - Bolt-in Relocation Brackets - Strano springs - Koni shocks - 17" C6Z06 wheels - 326HP/335ft-lbs - 12.35 @ 110.41
Quote:
Originally Posted by Blackbirdws6
I can appreciate a dream but this person needed some real friends.
|
|
|
|
|
|
10-28-2017, 08:21 AM
|
#11
|
Join Date: Sep 2008
Location: Hackettstown, NJ
Posts: 1,643
|
I updated my posts to make my idiocy public. Kept saying 'Strano' when I mean 'Straub'. Also, the BTR kit is like the Comp Cams kit. Not bushings.
__________________
1998 Z-28 - SLP lid - Ported TB - LS6 Intake - Dynatech SS headers/Catted Y - Magnaflow Exh - 3.42 - Yank SS3600 - UMI weld-in subframe connectors, Adj LCA, Adj PHB, Q1A TA - Bolt-in Relocation Brackets - Strano springs - Koni shocks - 17" C6Z06 wheels - 326HP/335ft-lbs - 12.35 @ 110.41
Quote:
Originally Posted by Blackbirdws6
I can appreciate a dream but this person needed some real friends.
|
Last edited by The_Bishop; 10-28-2017 at 08:22 AM.
|
|
|
|
|
10-31-2017, 05:48 PM
|
#12
|
Join Date: Sep 2008
Location: Hackettstown, NJ
Posts: 1,643
|
Got my Straub bushing kit in. Nicely made and packaged.
__________________
1998 Z-28 - SLP lid - Ported TB - LS6 Intake - Dynatech SS headers/Catted Y - Magnaflow Exh - 3.42 - Yank SS3600 - UMI weld-in subframe connectors, Adj LCA, Adj PHB, Q1A TA - Bolt-in Relocation Brackets - Strano springs - Koni shocks - 17" C6Z06 wheels - 326HP/335ft-lbs - 12.35 @ 110.41
Quote:
Originally Posted by Blackbirdws6
I can appreciate a dream but this person needed some real friends.
|
|
|
|
|
|
11-02-2017, 02:58 PM
|
#13
|
|
The Mayor / 2009 Member of the Year / Moderator
Join Date: Jan 2005
Location: Northwest
Posts: 8,866
|
Quote:
Originally Posted by The_Bishop
Got my Straub bushing kit in. Nicely made and packaged.
|
Bet not as good as the Strano's
__________________
1995 Z28 Convertible A4 13.78 @ 100 (CAI, high flow cat, catback, 160 thermo, hypertech, Strano springs, Koni yellows, sway bars, 3 pt. UMI SFC)
2018 Sea Doo GTX - 3 cylinders and das boooooost
Quote:
Originally Posted by BonzoHansen
Is English your 2nd language? Did you graduate high school? Your posts make my head hurt.
|
 Team FARM 
|
|
|
|
|
11-02-2017, 08:31 PM
|
#14
|
Join Date: Sep 2008
Location: Hackettstown, NJ
Posts: 1,643
|
Very funny, good sir.
__________________
1998 Z-28 - SLP lid - Ported TB - LS6 Intake - Dynatech SS headers/Catted Y - Magnaflow Exh - 3.42 - Yank SS3600 - UMI weld-in subframe connectors, Adj LCA, Adj PHB, Q1A TA - Bolt-in Relocation Brackets - Strano springs - Koni shocks - 17" C6Z06 wheels - 326HP/335ft-lbs - 12.35 @ 110.41
Quote:
Originally Posted by Blackbirdws6
I can appreciate a dream but this person needed some real friends.
|
|
|
|
|
|
11-06-2017, 01:14 PM
|
#15
|
|
Ebearnezer Scrooge/Power Member/Lips
Join Date: May 2006
Location: Hamilton, Mercer county
Posts: 4,141
|
Thanks for recommending that I not use the Comp Cams trunnions. BTR is running 10% off the whole month for their products, so I ordered 2 trunnion kits, though I should order a 3rd and put a set in the 4.8 daily driver too 
|
|
|
|
|
11-06-2017, 01:15 PM
|
#16
|
|
Ebearnezer Scrooge/Power Member/Lips
Join Date: May 2006
Location: Hamilton, Mercer county
Posts: 4,141
|
I also bought two cams, and two spring kits, lol
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
|
|
