![Reply](http://www.njfboa.org/forums/images/buttons/reply.gif) |
10-05-2018, 03:30 PM
|
#1
|
Power Member / trans break does not equal transbrake
Join Date: May 2009
Location: The Meadowlands
Posts: 4,513
|
Front Suspension Concerns
With about 500 miles on my build, its time to address some small issues.
2000 Z28
-PA Racing Tubular K Member
-Spohn Adjustable Lower control arms(spherical rod ends)
-UMI Non Adjustable Upper Control arms(Poly)
-Strange Single Adjustable Coil overs w. #275 springs
-UMI Solid engine mounts
-No Front Sway Bar
-Stock upper control arm plates
-All Assembled with brand new hardware.
Driving on anything that isnt a perfectly smooth road or highway results in some TERRIBLE squeaks and creaks from the front end. I drove threw a cars and coffee this past weekend and i was getting a ton of looks, and im pretty sure it was bc my cars sounded like a creaky door and not bc there was a 4th gen on Hoosiers in a sea of McLarens.
Now is this creak and squeak just a "nature of the beast" kind of thing? This is my first car with "race" front end components, so its new to me. The car was aligned by a local racer(Carlos Sobrino for those familiar with NMRA Factory Stock ) and all adjustable points on both the front and rear were marked with paint marker, and nothing has backed out or loosened. The sound isnt a huge huge deal to me, but if you guys think something may be up or if there is anything i should look into/lube i want to know. I can deal with the sounds, i just dont want to be damaging anything.
Also when i hit anything with a bump more so than a manhole cover, it rattles the car pretty bad. I very loud sound from the front end. Almost like i bottomed out the shock. I have not touched the settings on the coil overs since taking them out of the box.
__________________
99 Z28 - SBE LS1/60e
Motor - 10.84 @ 128 - 1.47 60'
Nitrous - 10.16 @ 132 - 1.40 60"
|
|
|
10-05-2018, 03:43 PM
|
#2
|
American Road Warrior
Join Date: Jul 2005
Location: Wastelands of NJ
Posts: 6,116
|
Any time you deal with rod ends you are opening yourself up to creaks, moans, and frequent lubing needs. I have some simple "traction bars" on my car that basically need weekly lubrication to deal with moans and groans. I use silicone spray and let it fly.
__________________
unstable bob gable: LEGENDARY LEGEND,
ICONIC ICON, AND AMERICAN BAD AZZ!!!
1991 Dodge Spirit R/T: Gran'pa lookin' 150+ mph turbo rocket.
2013 Dodge Avenger RT: Wastelands cruiser.
2008 Crown Vic Police Interceptor: 'Nuff said!
THE ONLY THING THAT SUCKS WORSE THEN IMPORTS ARE RICED OUT IMPORTS!!!
|
|
|
10-05-2018, 05:05 PM
|
#3
|
Join Date: Sep 2008
Location: Howell,NJ
Posts: 536
|
What he said ^ . I also have the PA racing k member and lower control arms on my car . I routinely spray the rod ends with WD-40 or they squeak bad. I also have the 275 lb springs on my front end but my car is a v6. Check your rebound and compression settings that they are equal on both sides. They should be cranked in (+) quite a bit because those springs are loose for a v8 on the street.
__________________
94 CAMARO
TURBO 3.5 LITER
12.573 @ 107.29 1/4 MILE
8.021 @ 86.38 1/8 MILE
BEST 60' 1.781
|
|
|
10-05-2018, 07:53 PM
|
#4
|
11 sec club
Join Date: Aug 2014
Location: Woodbridge
Posts: 834
|
Also notice a few of those noises when I put my Tubular K in. Double checked that everything was tight, and haven’t looked at it since. NJ roads suck and don’t be surprised if bend or break something on a bigger pot hole.
__________________
99 Z28 Trick Flow 215s milled to 61cc 228/232 Cam Fast 102 built 4l65e trans 4000 converter 12 bolt 410s Electric WP deleted PS/AC Dyno & Track tuned
2015 ATS Coupe. AWD 2.0 Turbo
2012 2500hd Silverado with LTZ 20s on 35x12.5x20
86 Buick GN Lesabre 1 of 117 (4-Sale)
|
|
|
10-05-2018, 08:16 PM
|
#5
|
Resident Camera Guy
Join Date: Aug 2004
Location: North Jersey
Posts: 10,971
|
Is your interior in? When I was running the car tin-canned it was noticeably more violent. I run a Spohn Road-Race tubular K-Member and QA-1 coil ovefs, and most of the noise came from the back of the car.
__________________
|
|
|
10-05-2018, 10:05 PM
|
#6
|
Lord of the rings / 10 Second Club / Meet Coordinator
Join Date: Aug 2004
Location: Millstone Township, NJ
Posts: 6,359
|
If mine makes noise, I wouldn't know it....
__________________
97 T/A Ram Air Convt
Forever dyno queen / 777rwhp 662 rwtq @ 17lbs / 10.2 @ 140
'24 Corvette Z06
17 Sierra 2500HD Dmax
81 Turbo TA
|
|
|
10-06-2018, 06:20 AM
|
#7
|
Meet Coordinator
Join Date: Jan 2008
Location: brick/pt. pleasant beach
Posts: 19,341
|
Lube it and tighten up the shocks a bit.
|
|
|
10-06-2018, 07:21 AM
|
#8
|
Power Member / trans break does not equal transbrake
Join Date: May 2009
Location: The Meadowlands
Posts: 4,513
|
Bob/Grape - Ill grab a can from napa today and hit em. The 275s springs are indeed a bit light for a V8, but i cut a ton of stuff out of the front end and was hoping to get to an acceptable weight for 275s but maybe im just not there.
MDSheds & Sausage Sandwich - Agreed, and especially around were i live. sometimes they are unavoidable too.
Alex - I have the interior in the car, but without any form of sound deadening. The dash is gutted, and the carpet is just Ozite.
BLS- so you are saying buy a blower and the sounds will vanish?
Adam- Tighten the shocks as in like the actual mounting hardware? Or the adjustment knob.
__________________
99 Z28 - SBE LS1/60e
Motor - 10.84 @ 128 - 1.47 60'
Nitrous - 10.16 @ 132 - 1.40 60"
|
|
|
10-06-2018, 07:40 AM
|
#9
|
Lord of the rings / 10 Second Club / Meet Coordinator
Join Date: Aug 2004
Location: Millstone Township, NJ
Posts: 6,359
|
Blower with open bypass and problem solved.
Assuming Adams response, tighten the shock settings.
__________________
97 T/A Ram Air Convt
Forever dyno queen / 777rwhp 662 rwtq @ 17lbs / 10.2 @ 140
'24 Corvette Z06
17 Sierra 2500HD Dmax
81 Turbo TA
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
|
|