![Reply](http://www.njfboa.org/forums/images/buttons/reply.gif) |
|
03-06-2014, 06:30 PM
|
#301
|
Meet Coordinator
Join Date: Jan 2008
Location: brick/pt. pleasant beach
Posts: 19,341
|
My 93 f250 was bolts. It was a sliding bench seat too. Fun times for sure.
|
|
|
03-10-2014, 08:43 AM
|
#302
|
Ebearnezer Scrooge/Power Member/Lips
Join Date: May 2006
Location: Hamilton, Mercer county
Posts: 4,141
|
So I got the seats in over the weekend. Fortunately I had some help as the slider on the LH side of the drivers seat was stuck for some reason. Even though I had the locking lever out the slider wouldn't slide. My friend had to get in the back and push with his feet while I pulled while sitting in the seat.
The good; the seats are really comfortable and I think they look good in the car.
The Bad; the seat pan is really tall compared to the factory seat and with the brackets and sliders my head almost touches the headliner and getting in and out I hit my head on the roof. I am of average height and I was no where near the roof before. I may wind up taking the slider out on the drivers side and mounting the seat directly to the bracket, or at the very least I am going to try to cut the bracket down to make the rear of the seat lower. But it is going to stay this way for a little while since i just want to drive already.
|
|
|
03-10-2014, 08:55 AM
|
#303
|
NJFBOA Supporting Sponsor
Join Date: Feb 2006
Location: HULMEVILLE, PA
Posts: 2,023
|
Procharger.. I can get you a SCREAMIN deal....
You fixed my airflow problem.. Let me help you fix yours!
__________________
JSSPEEDANDCUSTOM.COM
|
|
|
03-10-2014, 09:00 AM
|
#304
|
Ebearnezer Scrooge/Power Member/Lips
Join Date: May 2006
Location: Hamilton, Mercer county
Posts: 4,141
|
LOL, thanks but I have other stuff I need to buy this year, so unless it is free.....
|
|
|
03-10-2014, 09:17 AM
|
#305
|
NJFBOA Supporting Sponsor
Join Date: Feb 2006
Location: HULMEVILLE, PA
Posts: 2,023
|
Free, I can not do... When you're ready well come up with a killer package..
__________________
JSSPEEDANDCUSTOM.COM
|
|
|
03-15-2014, 07:56 PM
|
#306
|
Ebearnezer Scrooge/Power Member/Lips
Join Date: May 2006
Location: Hamilton, Mercer county
Posts: 4,141
|
Only a year later...
|
|
|
03-15-2014, 08:57 PM
|
#307
|
Admin.
Join Date: Aug 2005
Location: Hamilton, NJ
Posts: 20,149
|
did you put the front end together before your new rad support came in?
__________________
Vent Windows Forever!
The looser the waistband, the deeper the quicksand. Or so I have read.
Feather-light suspension, Konis just couldn't hold. I'm so glad I took a look inside your showroom doors.
Hey everybody, it's good to have you on the Baba-too-da-ba-too-ba-ba-buh-doo-ga-ga-bop-a-dop
|
|
|
03-15-2014, 09:05 PM
|
#308
|
Ebearnezer Scrooge/Power Member/Lips
Join Date: May 2006
Location: Hamilton, Mercer county
Posts: 4,141
|
No, rad support comes Monday
|
|
|
03-17-2014, 07:30 PM
|
#309
|
Ebearnezer Scrooge/Power Member/Lips
Join Date: May 2006
Location: Hamilton, Mercer county
Posts: 4,141
|
All I can say is this thing is awesome. Extremely well made and highly recommend.
Unfortunately it looks like they designed it so you have to trim the inner fender in the battery tray area, which I didn't know. Which means I have to trim my carbon fibear inner fender
I am going to call tomorrow to confirm that is correct before I start cutting.
There was one small spot where a weld interfered with the bracket for the support to frame bushing. I just took the file and knocked the spot down
They made an interesting choice regarding the mounts for the AC condenser though, the mounts are welded to the radiator, not the support like I would have thought. On the plus side, between this and the carbon fiber, the rear of the car looks like complete utter crap. I am going to have to make a hood latch brace out of aluminum to replace the steel one now, since that looks like crap, and I don't need the tabs on that like a factory setup needs the brace for support on the grille or surround. I also screwed up the bung for the overflow hose nipple and the threads on the nipple
Last edited by PolarBear; 03-17-2014 at 07:32 PM.
|
|
|
03-17-2014, 08:20 PM
|
#310
|
Lord of the rings / 10 Second Club / Meet Coordinator
Join Date: Aug 2004
Location: Millstone Township, NJ
Posts: 6,357
|
Man, look at all that room for activities. Rad support looks great but I would shed a tear having to cut the new carbon fiber things.
__________________
97 T/A Ram Air Convt
Forever dyno queen / 777rwhp 662 rwtq @ 17lbs / 10.2 @ 140
'24 Corvette Z06
17 Sierra 2500HD Dmax
81 Turbo TA
|
|
|
03-17-2014, 08:29 PM
|
#311
|
Ebearnezer Scrooge/Power Member/Lips
Join Date: May 2006
Location: Hamilton, Mercer county
Posts: 4,141
|
Quote:
Originally Posted by Blackbirdws6
Man, look at all that room for activities. Rad support looks great but I would shed a tear having to cut the new carbon fiber things.
|
yeah It won't be an easy thing to do. I will basically have to cut the flange that would mount to the old support and into the battery tray slightly. If I wind up having to do it It'll probably take 1,000,000 tries to get it right
|
|
|
03-17-2014, 09:13 PM
|
#312
|
Join Date: Jun 2007
Location: Arm pit of the world... NJ
Posts: 2,676
|
Something must have happened with your keyboard and this didn't come out very well so I decided to help you out.
I also screwed up the bung for the overflow hose nipple and the threads on the nipple
__________________
John
|
|
|
03-17-2014, 10:34 PM
|
#313
|
Resident Camera Guy
Join Date: Aug 2004
Location: North Jersey
Posts: 10,971
|
That is one sexy looking front end!
__________________
|
|
|
03-29-2014, 07:24 PM
|
#314
|
Ebearnezer Scrooge/Power Member/Lips
Join Date: May 2006
Location: Hamilton, Mercer county
Posts: 4,141
|
Turns out I was wrong about cutting the inner fenders. I didn't realize I was putting them in the wrong area on the back of the rad support. After I attached the other parts that came with it I realized that they provisioned attaching the battery tray to the back of the support as the OEM did. I had to clip the corner off one of the spots where it interfered with placement, but it was very minor. Unfortunately they put the hole in the wrong spot for the inner hole for the battery tray, so I'll have to drill new ones. I even checked against my stock inner fenders and it was off against them too.
Also had to use the die grinder on a few of the holes for the RH inner fender-to-outer to get all the bolts in the holes but that was all pretty minor too. I'll have to take the Rad support off a few more times but I should have made some decent progress by the end of the day tomorrow
|
|
|
04-02-2014, 02:03 PM
|
#315
|
Ebearnezer Scrooge/Power Member/Lips
Join Date: May 2006
Location: Hamilton, Mercer county
Posts: 4,141
|
Backspacing issues aside, I am getting a set of Year One Z28's in 17x8 and 17x9 for the car. I don't expect to use them forever, but it is a relatively inexpensive wheel that looks good on the car. Year One has free shipping right now and Keith is giving me an even better deal, so I figure I won't be out too much to get something on the car this year. These should hold me over a season or two.
|
|
|
04-02-2014, 02:13 PM
|
#316
|
Admin.
Join Date: Aug 2005
Location: Hamilton, NJ
Posts: 20,149
|
will that let you put the good brakes on?
__________________
Vent Windows Forever!
The looser the waistband, the deeper the quicksand. Or so I have read.
Feather-light suspension, Konis just couldn't hold. I'm so glad I took a look inside your showroom doors.
Hey everybody, it's good to have you on the Baba-too-da-ba-too-ba-ba-buh-doo-ga-ga-bop-a-dop
|
|
|
04-02-2014, 02:22 PM
|
#317
|
Ebearnezer Scrooge/Power Member/Lips
Join Date: May 2006
Location: Hamilton, Mercer county
Posts: 4,141
|
Yes, and mostly the reason I am getting them
|
|
|
04-02-2014, 03:31 PM
|
#318
|
Admin.
Join Date: Aug 2005
Location: Hamilton, NJ
Posts: 20,149
|
cool
__________________
Vent Windows Forever!
The looser the waistband, the deeper the quicksand. Or so I have read.
Feather-light suspension, Konis just couldn't hold. I'm so glad I took a look inside your showroom doors.
Hey everybody, it's good to have you on the Baba-too-da-ba-too-ba-ba-buh-doo-ga-ga-bop-a-dop
|
|
|
04-07-2014, 08:27 PM
|
#319
|
Ebearnezer Scrooge/Power Member/Lips
Join Date: May 2006
Location: Hamilton, Mercer county
Posts: 4,141
|
UPS JUST delivered, so I had to put one on right away.
Now I have to find money for tires
Now it's time for bed
|
|
|
04-07-2014, 09:01 PM
|
#320
|
BadMod
Join Date: Aug 2004
Location: hamilton, nj
Posts: 8,889
|
Find some at the swap meet
__________________
So much stupid, so little time.
Quote:
Originally Posted by 79CamaroDiva
It started before I drove your car. I just have to look at it the wrong way and your car poops parts.
|
Mercerville MotorSports, LLC
|
|
|
04-08-2014, 06:39 AM
|
#321
|
Ebearnezer Scrooge/Power Member/Lips
Join Date: May 2006
Location: Hamilton, Mercer county
Posts: 4,141
|
Find some money at the swap meet?
|
|
|
04-08-2014, 06:51 AM
|
#322
|
BadMod
Join Date: Aug 2004
Location: hamilton, nj
Posts: 8,889
|
Sure sell some crap then buy tires
__________________
So much stupid, so little time.
Quote:
Originally Posted by 79CamaroDiva
It started before I drove your car. I just have to look at it the wrong way and your car poops parts.
|
Mercerville MotorSports, LLC
|
|
|
04-08-2014, 08:07 AM
|
#323
|
Ebearnezer Scrooge/Power Member/Lips
Join Date: May 2006
Location: Hamilton, Mercer county
Posts: 4,141
|
That's a good point. There is an LS1 sitting in my garage that I'll never use
|
|
|
04-08-2014, 08:14 AM
|
#324
|
BadMod
Join Date: Aug 2004
Location: hamilton, nj
Posts: 8,889
|
It will be used before the fire pit sitting next to it
__________________
So much stupid, so little time.
Quote:
Originally Posted by 79CamaroDiva
It started before I drove your car. I just have to look at it the wrong way and your car poops parts.
|
Mercerville MotorSports, LLC
|
|
|
04-08-2014, 08:30 AM
|
#325
|
Ebearnezer Scrooge/Power Member/Lips
Join Date: May 2006
Location: Hamilton, Mercer county
Posts: 4,141
|
You may use it, but not I
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
|
|