![Reply](http://www.njfboa.org/forums/images/buttons/reply.gif) |
|
05-02-2014, 01:35 PM
|
#26
|
Join Date: Jun 2007
Location: Arm pit of the world... NJ
Posts: 2,676
|
My biggest concern with an epoxy floor is that I do a lot of welding/grinding/torch cutting/plasma cutting and the resultant sparks/embers make burn marks in the epoxy. This is the main reason I haven't done it yet. If I had a "show" garage it would have been done already.
__________________
John
|
|
|
05-02-2014, 01:45 PM
|
#27
|
Ayatollah of Rock N Rolla / Admin
Join Date: Mar 2006
Location: Parts Unknown
Posts: 12,573
|
Quote:
Originally Posted by Featherburner
My biggest concern with an epoxy floor is that I do a lot of welding/grinding/torch cutting/plasma cutting and the resultant sparks/embers make burn marks in the epoxy. This is the main reason I haven't done it yet. If I had a "show" garage it would have been done already.
|
It didn't in my case with Insul-X on the floor. I've made a ton of sparks and haven't messed it up.
To be honest the worst spots were where hot truck tires were turned in place ![Good Grief](http://www.njfboa.org/forums/images/smilies/facepalm.gif) . The floor is not perfect but it's much better than bare concrete or sealer.
For a show garage I'd do vinyl tile again
|
|
|
05-02-2014, 01:56 PM
|
#28
|
Admin.
Join Date: Aug 2005
Location: Hamilton, NJ
Posts: 20,149
|
I have had zero hot tire issues.
i've only done a little bit of welding but it did not hurt anything. if you had a lot to do you could temporarily protect the floor I suppose. Or live with a few chips as a badge of honor lol. and how much of that is the OP going to do anyway?
my floor cut down on dust considerably, makes spill clean up easy, and made the whole garage brighter. i did not make my floor pretty. i did not fill any chips or cracks in advance. no dumb colored speckles. I'm still really happy I did it.
if i had to fix a chip i think I'd just touch it up with gray por15. that doesn't come up easy either lol
__________________
Vent Windows Forever!
The looser the waistband, the deeper the quicksand. Or so I have read.
Feather-light suspension, Konis just couldn't hold. I'm so glad I took a look inside your showroom doors.
Hey everybody, it's good to have you on the Baba-too-da-ba-too-ba-ba-buh-doo-ga-ga-bop-a-dop
|
|
|
05-02-2014, 01:57 PM
|
#29
|
Join Date: Jun 2007
Location: Arm pit of the world... NJ
Posts: 2,676
|
Quote:
Originally Posted by WildBillyT
It didn't in my case with Insul-X on the floor. I've made a ton of sparks and haven't messed it up.
To be honest the worst spots were where hot truck tires were turned in place ![Good Grief](http://www.njfboa.org/forums/images/smilies/facepalm.gif) . The floor is not perfect but it's much better than bare concrete or sealer.
For a show garage I'd do vinyl tile again ![Very Happy](http://www.njfboa.org/forums/images/smilies/icon_biggrin.gif)
|
Well the sparks are the least of my worries. How about steel severed with a torch or bolts burned off with a torch? Does it hold up to that? If so, this might be something to do sooner rather than later.
__________________
John
|
|
|
05-02-2014, 02:03 PM
|
#30
|
Ayatollah of Rock N Rolla / Admin
Join Date: Mar 2006
Location: Parts Unknown
Posts: 12,573
|
Quote:
Originally Posted by Featherburner
Well the sparks are the least of my worries. How about steel severed with a torch or bolts burned off with a torch? Does it hold up to that? If so, this might be something to do sooner rather than later.
|
I gotta drop by there this afternoon, I'll look at the floor and give it a closer look. Although for heavy duty stuff I put a welding blanket down just in case. I think the floor might be OK but I'd rather not beat the **** out of it for no reason. MIG sparks are a non issue.
|
|
|
05-02-2014, 04:25 PM
|
#31
|
Join Date: Dec 2009
Location: milltown
Posts: 1,497
|
Door is hung, Windows in, roof done, siding done, dirt is tamped waiting to poor some more concrete
__________________
2002 Camaro Sunset Orange Mettalic, V6, 5spd, bilstein HD shocks and struts, eibach pro lowering kit, eibach f/r sway bars, lakewood PHB, UMI 2 point subframe connectors, energy suspensions poly master bushing kit
daily econobox and first car
1986 IROC-Z, T56, MGW shifter, Heads, Cam, Holley Stealth Ram 350, t-top, tubular LCA with relo brackets, adjustable PHB, belltech sway bars, ground control weight jacks, SLP mid length headers, 3in w/borla XR1, RIP 3 10 bolts, 12.7 @ 109 so far.. atleast its faster than stock SOLD
1971 Camaro LS3/T56/9in, cam only and still carbed, RIP 2 10 bolts, 11.62@121
03 Blazer 2 door - salt sponge
|
|
|
05-02-2014, 04:27 PM
|
#32
|
Join Date: Dec 2009
Location: milltown
Posts: 1,497
|
![](http://i147.photobucket.com/albums/r302/redsoxsstink/IMAG0250_zps4xkb4po7.jpg)
Here's a pic of the pavers we will be using. They are gonna be fun to lay.... Nahht
__________________
2002 Camaro Sunset Orange Mettalic, V6, 5spd, bilstein HD shocks and struts, eibach pro lowering kit, eibach f/r sway bars, lakewood PHB, UMI 2 point subframe connectors, energy suspensions poly master bushing kit
daily econobox and first car
1986 IROC-Z, T56, MGW shifter, Heads, Cam, Holley Stealth Ram 350, t-top, tubular LCA with relo brackets, adjustable PHB, belltech sway bars, ground control weight jacks, SLP mid length headers, 3in w/borla XR1, RIP 3 10 bolts, 12.7 @ 109 so far.. atleast its faster than stock SOLD
1971 Camaro LS3/T56/9in, cam only and still carbed, RIP 2 10 bolts, 11.62@121
03 Blazer 2 door - salt sponge
|
|
|
05-03-2014, 07:01 AM
|
#33
|
Join Date: Oct 2009
Location: West Milford
Posts: 1,026
|
You going to heat it?
__________________
1991 Camaro
1992 L98/ttop Firehawk tribute (sold)
2006 Srt-10 Viper
2012 z-71
2011 Equinox (family vehicle)
|
|
|
05-03-2014, 07:27 AM
|
#34
|
Meet Coordinator
Join Date: Jan 2008
Location: brick/pt. pleasant beach
Posts: 19,341
|
I like those pavers.
|
|
|
05-03-2014, 07:34 AM
|
#35
|
Join Date: Dec 2009
Location: milltown
Posts: 1,497
|
Quote:
Originally Posted by 1320B4U
You going to heat it?
|
no, just a space heater, but maybe a wood burning stove
Quote:
Originally Posted by sweetbmxrider
I like those pavers.
|
thanks, never seen anything lke em before so it should be interesting
__________________
2002 Camaro Sunset Orange Mettalic, V6, 5spd, bilstein HD shocks and struts, eibach pro lowering kit, eibach f/r sway bars, lakewood PHB, UMI 2 point subframe connectors, energy suspensions poly master bushing kit
daily econobox and first car
1986 IROC-Z, T56, MGW shifter, Heads, Cam, Holley Stealth Ram 350, t-top, tubular LCA with relo brackets, adjustable PHB, belltech sway bars, ground control weight jacks, SLP mid length headers, 3in w/borla XR1, RIP 3 10 bolts, 12.7 @ 109 so far.. atleast its faster than stock SOLD
1971 Camaro LS3/T56/9in, cam only and still carbed, RIP 2 10 bolts, 11.62@121
03 Blazer 2 door - salt sponge
|
|
|
05-03-2014, 08:07 AM
|
#36
|
Admin.
Join Date: Aug 2005
Location: Hamilton, NJ
Posts: 20,149
|
Quote:
Originally Posted by redsoxsstink
...but maybe a wood burning stove
|
no, too much lost room and open flames don't always go well in a working garage.
__________________
Vent Windows Forever!
The looser the waistband, the deeper the quicksand. Or so I have read.
Feather-light suspension, Konis just couldn't hold. I'm so glad I took a look inside your showroom doors.
Hey everybody, it's good to have you on the Baba-too-da-ba-too-ba-ba-buh-doo-ga-ga-bop-a-dop
|
|
|
05-03-2014, 01:29 PM
|
#37
|
Ayatollah of Rock N Rolla / Admin
Join Date: Mar 2006
Location: Parts Unknown
Posts: 12,573
|
Quote:
Originally Posted by BonzoHansen
no, too much lost room and open flames don't always go well in a working garage.
|
X2. Find another way.
|
|
|
05-03-2014, 06:25 PM
|
#38
|
Join Date: Mar 2007
Location: metuchen
Posts: 234
|
Quote:
Originally Posted by redsoxsstink
no, just a space heater, but maybe a wood burning stove
thanks, never seen anything lke em before so it should be interesting
|
Consider a ductless heat pump. If you can flare copper and get ahold of a vacuum pump you can install it yourself. I'm considering a new garage myself. Be curious what happens to your taxes after and if they reassess your whole house too. My tax guy said he would walk through the whole house and revalue it.
|
|
|
05-03-2014, 08:04 PM
|
#39
|
Join Date: Mar 2011
Location: Morris County
Posts: 1,033
|
Quote:
Originally Posted by redsoxsstink
![](http://i147.photobucket.com/albums/r302/redsoxsstink/IMAG0250_zps4xkb4po7.jpg)
Here's a pic of the pavers we will be using. They are gonna be fun to lay.... Nahht
|
Are they pervious pavers?
__________________
94 Trans am 25th anniversary
86 Buick Regal T-type
73 camaro 454/T56 work in progress.
|
|
|
05-05-2014, 07:38 AM
|
#40
|
Join Date: Dec 2009
Location: milltown
Posts: 1,497
|
they are rinox brand, im nut sure the model name
__________________
2002 Camaro Sunset Orange Mettalic, V6, 5spd, bilstein HD shocks and struts, eibach pro lowering kit, eibach f/r sway bars, lakewood PHB, UMI 2 point subframe connectors, energy suspensions poly master bushing kit
daily econobox and first car
1986 IROC-Z, T56, MGW shifter, Heads, Cam, Holley Stealth Ram 350, t-top, tubular LCA with relo brackets, adjustable PHB, belltech sway bars, ground control weight jacks, SLP mid length headers, 3in w/borla XR1, RIP 3 10 bolts, 12.7 @ 109 so far.. atleast its faster than stock SOLD
1971 Camaro LS3/T56/9in, cam only and still carbed, RIP 2 10 bolts, 11.62@121
03 Blazer 2 door - salt sponge
|
|
|
05-22-2014, 10:03 PM
|
#41
|
Join Date: Dec 2009
Location: milltown
Posts: 1,497
|
concrete pored and door in
![](http://i147.photobucket.com/albums/r302/redsoxsstink/IMAG0313_zpscw2q44nv.jpg)
and shes done...... pavers to come but that job will be on hold may have and 2nd gen project car in the works
__________________
2002 Camaro Sunset Orange Mettalic, V6, 5spd, bilstein HD shocks and struts, eibach pro lowering kit, eibach f/r sway bars, lakewood PHB, UMI 2 point subframe connectors, energy suspensions poly master bushing kit
daily econobox and first car
1986 IROC-Z, T56, MGW shifter, Heads, Cam, Holley Stealth Ram 350, t-top, tubular LCA with relo brackets, adjustable PHB, belltech sway bars, ground control weight jacks, SLP mid length headers, 3in w/borla XR1, RIP 3 10 bolts, 12.7 @ 109 so far.. atleast its faster than stock SOLD
1971 Camaro LS3/T56/9in, cam only and still carbed, RIP 2 10 bolts, 11.62@121
03 Blazer 2 door - salt sponge
|
|
|
10-20-2014, 09:38 PM
|
#42
|
Join Date: Dec 2009
Location: milltown
Posts: 1,497
|
__________________
2002 Camaro Sunset Orange Mettalic, V6, 5spd, bilstein HD shocks and struts, eibach pro lowering kit, eibach f/r sway bars, lakewood PHB, UMI 2 point subframe connectors, energy suspensions poly master bushing kit
daily econobox and first car
1986 IROC-Z, T56, MGW shifter, Heads, Cam, Holley Stealth Ram 350, t-top, tubular LCA with relo brackets, adjustable PHB, belltech sway bars, ground control weight jacks, SLP mid length headers, 3in w/borla XR1, RIP 3 10 bolts, 12.7 @ 109 so far.. atleast its faster than stock SOLD
1971 Camaro LS3/T56/9in, cam only and still carbed, RIP 2 10 bolts, 11.62@121
03 Blazer 2 door - salt sponge
|
|
|
10-21-2014, 12:22 AM
|
#43
|
Resident Camera Guy
Join Date: Aug 2004
Location: North Jersey
Posts: 10,971
|
God damn man, that looks incredible! Now I have to convince my dad to over-haul our garage!
__________________
|
|
|
10-21-2014, 06:55 AM
|
#44
|
Meet Coordinator
Join Date: Jan 2008
Location: brick/pt. pleasant beach
Posts: 19,341
|
Looks super nice
|
|
|
10-21-2014, 07:55 AM
|
#45
|
Join Date: Dec 2010
Location: Moorestown
Posts: 407
|
A job well done!!! Enjoy it...
__________________
Artful Dodger
Current:
2010 Camaro 2SS/RS M6 BLK, 2015 Maserati Ghibli Q4 Sport BLK (dd), 2020 Land Rover Discovery Sport BLK, 2012 MB C300 WHT
http://www.southjerseycamaro.com
|
|
|
10-21-2014, 09:19 AM
|
#46
|
Join Date: Oct 2014
Location: Morris County
Posts: 7
|
Awesome garage and great project with your dad. I can remember building my dad's garage with him and it was great fun. We still hang out there all the time and that was 20 years ago. Now, can I come by and change my oil?
|
|
|
10-21-2014, 09:20 AM
|
#47
|
NJFBOA Co-Founder
Join Date: Jul 2004
Location: All up in your kool aid!
Posts: 12,235
|
Thats pretty awesome. Congrats
How was it working with those pavers?
-Tim
|
|
|
10-21-2014, 09:23 AM
|
#48
|
Join Date: Dec 2009
Location: milltown
Posts: 1,497
|
Quote:
Originally Posted by NJSPEEDER
Thats pretty awesome. Congrats
How was it working with those pavers?
-Tim
|
![Good Grief](http://www.njfboa.org/forums/images/smilies/facepalm.gif) never again..... they were extremely heavy for pavers and with over 1000sq/ft it catches up really quickly. but the results were great imo.
thanks for the complements everyone!
__________________
2002 Camaro Sunset Orange Mettalic, V6, 5spd, bilstein HD shocks and struts, eibach pro lowering kit, eibach f/r sway bars, lakewood PHB, UMI 2 point subframe connectors, energy suspensions poly master bushing kit
daily econobox and first car
1986 IROC-Z, T56, MGW shifter, Heads, Cam, Holley Stealth Ram 350, t-top, tubular LCA with relo brackets, adjustable PHB, belltech sway bars, ground control weight jacks, SLP mid length headers, 3in w/borla XR1, RIP 3 10 bolts, 12.7 @ 109 so far.. atleast its faster than stock SOLD
1971 Camaro LS3/T56/9in, cam only and still carbed, RIP 2 10 bolts, 11.62@121
03 Blazer 2 door - salt sponge
Last edited by redsoxsstink; 10-21-2014 at 09:23 AM.
|
|
|
10-21-2014, 12:06 PM
|
#49
|
Join Date: May 2010
Location: Brick, NJ
Posts: 1,868
|
That looks great man. When I saw those pavers I was thinking wow they are gonna look great but what a PITA it will be lol
__________________
Formerly known as blk95formula
86t/a_ram_air on TGO
2018 Silverado 1500
|
|
|
10-21-2014, 11:38 PM
|
#50
|
10 Second Club / Meet Coordinator
Join Date: Dec 2004
Location: Roxbury, NJ
Posts: 2,111
|
wow that turned out really really nice
__________________
1987 IROC-Z - modified
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
|
|