another project started

[sweetbmxrider]

Usually you can get it started with a razor in a bare spot and pull it off easily. I would let the tint shop do it personally, the glue is a bitch.

[bigz28man]

I'll contact tronix here in manahawkin or barnegat and have them tackle it...better to be safe then try to do it and ruin the back windshield.

[RyanDestroysWorlds]

I used to work for a car dealership that made us pull the tint off each time a car came in, I forget the spray we uesd but we used black trash bags and heat guns to pull it off, It was a long and horrible process, Save yourself time and headache and let the tint shop do it.

[bigz28man]

BMR chr. moly adj. pan-hard bar, and lowering springs came in

[Blackbirdws6]

boxes look sweet

[bigz28man]

good point, so i added this

[bigz28man]

had a spare set of rear marker lights lying around so spent a little time doing this today




just waiting for paint to dry to pull bowtie off.

[bigz28man]

[Mike]

needs clear coat...

[bigz28man]

added clear, finished piece

[sweetbmxrider]

Man I want those wheels

[Blackbirdws6]

Not really feeling the corner mods. It's your car and you obviously like the look but I would at least consider sanding the raised letters and repainting it the way you have it. What kind of masking did you use as it looks like it bled a bit.

[bigz28man]

As soon as i can sell some of the parts sitting in my garage ie. Lt1 ss air box, maf sensor, 2x 285/35/18 tires, stock valve covers, polished valve covers, stock fuel pump, stock springs.... so i can buy a set of tires for the Z06 wheels i have they will be for sale.

[bigz28man]

Originally Posted by Blackbirdws6

Not really feeling the corner mods. It's your car and you obviously like the look but I would at least consider sanding the raised letters and repainting it the way you have it. What kind of masking did you use as it looks like it bled a bit.

Passenger side did bleed a bit due to the lense being slightly cracked, driver side came out perfect, grabbed another marker light (not cracked) repeated for passenger side and it didn't bleed either. Good idea on the sanding, I'll have to get another set and give it a shot.

[Blackbirdws6]

I did it to mine before I put some VHT on them. Def makes a difference.

[bigz28man]

What grit paper did you use?

[Blackbirdws6]

Umm maybe 400 and worked my way up to 1500/2000.

[sweetbmxrider]

I think I did my tails with 1000-2000 wet sanding.

[bigz28man]

at night with the running lights on

at night running lights off, with camera flash

[bigz28man]

took down a extra fender I had up in the attic last night. removed molding, lettering, soap washed, and cleaned rubbing alcohol. going to start sanding with 800, work up to a wet 2000, rewash and apply primer.

[V]

You do NOT want a 2000 grit finish to apply primer to.

400-600 grit at most. You need some texture for the primer/paint to adhere.

1500-2000+ grit is basically for final wet sanding of the clear coat before polishing.

[bigz28man]

k thanks

[bigz28man]

idk, just felt like uploading it

[bigz28man]

this is a little insane....$2000.00 http://rmn.craigslist.org/pts/3268222207.html

[B4C]

Is that car sebring silver or pewter? Its hard to tell in pics.