![Reply](http://www.njfboa.org/forums/images/buttons/reply.gif) |
|
11-08-2009, 04:26 PM
|
#51
|
Join Date: Feb 2005
Location: Orange County NY
Posts: 579
|
Quote:
Originally Posted by mc73nova
Congrats. What did you guys do differently to cut off the 4 tenths of your previous best?
|
To start we took a full tenth off of our 60' (going to a softer compound tire may have helped) . We also went with an 8" converter to help with efficiency. On top of that we added American Racing headers 1 7/8". Unfortunately, we could not see a true gain because the transmission was slipping before the headers were installed. So the trans was rebuilt. Last, going speed density with the tune (no MAF restriction) and some fine tuning we picked up over 15 rwhp on our new 224x dynojet. He just ordered key weight reduction parts. I am confident results will improve December 3rd.
__________________
2000 Camaro 25.5 Turbo car ![Smile](http://www.njfboa.org/forums/images/smilies/icon_smile.gif) X275
|
|
|
11-08-2009, 04:50 PM
|
#52
|
Join Date: May 2005
Location: under a roof
Posts: 2,034
|
Quote:
Originally Posted by 1984camaroz28
To start we took a full tenth off of our 60' (going to a softer compound tire may have helped) . We also went with an 8" converter to help with efficiency. On top of that we added American Racing headers 1 7/8". Unfortunately, we could not see a true gain because the transmission was slipping before the headers were installed. So the trans was rebuilt. Last, going speed density with the tune (no MAF restriction) and some fine tuning we picked up over 15 rwhp on our new 224x dynojet. He just ordered key weight reduction parts. I am confident results will improve December 3rd.
|
Sounds good. What RPM are you shifting at?
__________________
1973 Chevy Nova - best e.t.-10.04 - currently disassembled
1989 Pontiac Trans Am GTA
2016 Dodge Durango R/T
2015 Ram 3500 Dually Cummins
|
|
|
11-08-2009, 04:58 PM
|
#53
|
Join Date: Feb 2005
Location: Orange County NY
Posts: 579
|
7000 around
__________________
2000 Camaro 25.5 Turbo car ![Smile](http://www.njfboa.org/forums/images/smilies/icon_smile.gif) X275
|
|
|
11-12-2009, 06:49 PM
|
#54
|
Join Date: Sep 2008
Posts: 249
|
Having some valve float issues. Wait till they are fixed, homeboy Jared will really think i'm using nitrous oxide for sure LOL
__________________
9.98@132 Cam Only Record Holder ![Nod](http://www.njfboa.org/forums/images/smilies/nod.gif)
440 LSX - Times to come
2001 Z28 M6
2007 Jeep HEMI
|
|
|
11-12-2009, 06:59 PM
|
#55
|
Join Date: Feb 2005
Location: Orange County NY
Posts: 579
|
very easy fix SOLID ROLLER
__________________
2000 Camaro 25.5 Turbo car ![Smile](http://www.njfboa.org/forums/images/smilies/icon_smile.gif) X275
|
|
|
11-12-2009, 11:39 PM
|
#56
|
9 Second Club
Join Date: Dec 2004
Location: Merchantville
Posts: 518
|
OMG That launch was just beautiful, Gongrats guys! That car is very impressive. Im gonna go back and watch that video a few more times lol.
__________________
Twisted Minds Racing
2000 SS M6
9.71 @ 142
|
|
|
11-13-2009, 06:01 PM
|
#57
|
13 Second Club / Moderator
Join Date: Jan 2005
Location: Franklin Lakes, NJ
Posts: 8,686
|
clean your bumper! nice run. Car sounds mean! Good job guys
__________________
Quote:
Originally Posted by LS1ow
Except Jersey mike, great kid, but the way he looks at me makes me feel like im in danger
|
|
|
|
11-13-2009, 08:14 PM
|
#58
|
Join Date: Aug 2009
Location: Newark Delaware
Posts: 37
|
Very nice job! The solid roller should help.
Were any of the nitrous cars there that you guys hang with?
__________________
1986 Camaro
1996 firehawk (crashed)
Retired NHRA driver
Frank...
Last edited by TEKHAWK; 11-14-2009 at 02:20 PM.
|
|
|
11-16-2009, 06:56 PM
|
#59
|
Join Date: Sep 2008
Posts: 249
|
Quote:
Originally Posted by BarneyMobile
OMG That launch was just beautiful, Gongrats guys! That car is very impressive. Im gonna go back and watch that video a few more times lol.
|
Thanks, it carries the wheels really well.
Quote:
Originally Posted by qwikz28
clean your bumper! nice run. Car sounds mean! Good job guys
|
I like the rubber on the bumper look. I'm probably painting the car this winter either hugger orange or medium blue metallic
Quote:
Originally Posted by TEKHAWK
Very nice job! The solid roller should help.
Were any of the nitrous cars there that you guys hang with?
|
I just don't want to go solid roller and have everyone saying its not cam only because its solid roller. The thunder car that has the record i'm pretty sure was hydrolic roller. Also, none of those nitrous cars were they're. Our friend Rick who has a 440 lsx + spray was suppose to go but he had a little bit of trouble with his tow vehicle.
__________________
9.98@132 Cam Only Record Holder ![Nod](http://www.njfboa.org/forums/images/smilies/nod.gif)
440 LSX - Times to come
2001 Z28 M6
2007 Jeep HEMI
|
|
|
11-16-2009, 07:28 PM
|
#60
|
Meet Coordinator
Join Date: Jan 2008
Location: brick/pt. pleasant beach
Posts: 19,341
|
you guys should race vinny, he's heads/cam so he'll prob win
|
|
|
11-16-2009, 07:56 PM
|
#61
|
Join Date: Jul 2009
Location: barnegat nj
Posts: 1,340
|
01blackz28
why don't you think about using a set of lunati lifters or caddy lifters.
the caddy lifters where developed by gm to withstand long & high rpm's they run these lifters for racing @7200-7400rpms.
even katech uses them in the motors they build for the cts races
__________________
Quote:
Originally Posted by SRGN
I never pulled into the staging beams at the track and saw a dyno in the other lane.
|
South Jersey Racecraft
|
|
|
11-16-2009, 08:19 PM
|
#62
|
Join Date: Sep 2008
Posts: 249
|
Quote:
Originally Posted by sweetbmxrider
you guys should race vinny, he's heads/cam so he'll prob win ![Smile](http://www.njfboa.org/forums/images/smilies/icon_smile.gif)
|
The car will have a 440 lsx motor in it this spring and he doesn't want to run anyone untill around then
Quote:
Originally Posted by S.J.SLEEPER
01blackz28
why don't you think about using a set of lunati lifters or caddy lifters.
the caddy lifters where developed by gm to withstand long & high rpm's they run these lifters for racing @7200-7400rpms.
even katech uses them in the motors they build for the cts races
|
Lifters aren't the issue. I've been in contact with Shane from Thunder Racing(Co-owner). He is 100% positive that I am having valve float issues based on the dyno graphs I sent him. We're putting some new springs in with shims and we'll have it back on the dyno next week.
__________________
9.98@132 Cam Only Record Holder ![Nod](http://www.njfboa.org/forums/images/smilies/nod.gif)
440 LSX - Times to come
2001 Z28 M6
2007 Jeep HEMI
|
|
|
11-16-2009, 09:18 PM
|
#63
|
11 Second Club
Join Date: Feb 2008
Location: Edison, NJ
Posts: 4,619
|
^ I was floating the lifters with my car... springs were fine.
__________________
1999 Z28 Convertible. 6 speed swap, wide cowl hood, full hockey stripes, and a whining 10 bolt.
2008 Sierra Vortec Max. 6.2 swapped, headers, Magnaflow catback, GMPP CAI, NHT optioned tow package.
2006 GTO, 11.48 @ 118.3
|
|
|
11-17-2009, 11:58 AM
|
#64
|
10 Second Club; Has fan club
Join Date: Dec 2005
Location: Delmont nj
Posts: 4,369
|
Quote:
Originally Posted by Jared1970Chevelle
i know plenty of stock internal cars running into the 10s..... regardless.... cam only is cam only.... stock everything else including the exhaust manifolds....
regardless... that is a very impressive number and it is not cheap to go low 10s....
|
you fool, cam only is pertaining to whats done internally to the car.
so that means bolt ons + cam
stock internals means bolt ons and stock longblock
the fastest stock internal LS1 ran a 10.68@122mph on a 1.37 60' with a 3000 or sub 3000# raceweight, so a 10.3@129mph isnt hard to believe at all. nice pass!
__________________
01' Z06 62k miles. Vararam, Longtubes, off road xpipe, tuned by me. Times TBA
2001 Corvette, Bolt ons , tuned 10.75@124.56 mph 1.38 60' Sold
1997 Saturn Sc1 5spd DOHC swapped
Bolt ons, decked head, stock intake cam on exhaust side, lotsa weight redux
13.22@102.32 mph 1.93 60'
12's on moda? One day
Last edited by 98tadriver; 11-17-2009 at 12:02 PM.
|
|
|
11-17-2009, 01:53 PM
|
#65
|
Join Date: Sep 2008
Posts: 249
|
Quote:
Originally Posted by NJ Torque
^ I was floating the lifters with my car... springs were fine.
|
I spoke to the co-owner of Thunder Racing, he told me that it is without a doubt valve float. While the springs that are currently in the car " were a good spring in their day but there are much better options out there now." Shane also told me that the cam only car that has the record was running stock lifters.
Quote:
Originally Posted by 98tadriver
you fool, cam only is pertaining to whats done internally to the car.
so that means bolt ons + cam
stock internals means bolt ons and stock longblock
the fastest stock internal LS1 ran a 10.68@122mph on a 1.37 60' with a 3000 or sub 3000# raceweight, so a 10.3@129mph isnt hard to believe at all. nice pass!
|
Thanks hopefully we'll run a better time December 3rd.
__________________
9.98@132 Cam Only Record Holder ![Nod](http://www.njfboa.org/forums/images/smilies/nod.gif)
440 LSX - Times to come
2001 Z28 M6
2007 Jeep HEMI
|
|
|
11-18-2009, 11:18 AM
|
#66
|
10 Second Club; Has fan club
Join Date: Dec 2005
Location: Delmont nj
Posts: 4,369
|
no doubt you'll run better! gotta love atco in december with that nitrous-like DA lol
__________________
01' Z06 62k miles. Vararam, Longtubes, off road xpipe, tuned by me. Times TBA
2001 Corvette, Bolt ons , tuned 10.75@124.56 mph 1.38 60' Sold
1997 Saturn Sc1 5spd DOHC swapped
Bolt ons, decked head, stock intake cam on exhaust side, lotsa weight redux
13.22@102.32 mph 1.93 60'
12's on moda? One day
Last edited by 98tadriver; 11-18-2009 at 11:18 AM.
|
|
|
11-19-2009, 07:44 AM
|
#67
|
Join Date: Sep 2008
Posts: 249
|
Quote:
Originally Posted by 98tadriver
no doubt you'll run better! gotta love atco in december with that nitrous-like DA lol
|
Cartek guys on ls1tech said the day was only -50 that day not -500. So if I see a -1500 DA December 3rd It will definately feel like a nitrous pass LOL
__________________
9.98@132 Cam Only Record Holder ![Nod](http://www.njfboa.org/forums/images/smilies/nod.gif)
440 LSX - Times to come
2001 Z28 M6
2007 Jeep HEMI
|
|
|
11-28-2009, 01:36 PM
|
#68
|
Join Date: Sep 2008
Posts: 249
|
*************UPDATE*************
New springs in picked up 1 peak hp on the dyno. That isn't all, picked up in spots under the curver 30hp!!!!!!!! Not to mention the 10 ft lb of torque across the board!!!!!! Can't wait to run this thurday ![Smile](http://www.njfboa.org/forums/images/smilies/icon_smile.gif) New videos to come.....
__________________
9.98@132 Cam Only Record Holder ![Nod](http://www.njfboa.org/forums/images/smilies/nod.gif)
440 LSX - Times to come
2001 Z28 M6
2007 Jeep HEMI
|
|
|
11-28-2009, 01:37 PM
|
#69
|
Join Date: Sep 2008
Posts: 249
|
BTW still hydro roller with STOCK LIFTERS
__________________
9.98@132 Cam Only Record Holder ![Nod](http://www.njfboa.org/forums/images/smilies/nod.gif)
440 LSX - Times to come
2001 Z28 M6
2007 Jeep HEMI
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
|
|