|
|
08-16-2018, 06:49 AM
|
#1901
|
Power Member / trans break does not equal transbrake
Join Date: May 2009
Location: The Meadowlands
Posts: 4,513
|
Quote:
Originally Posted by sweetbmxrider
You had the parking lights on too, right?
|
Yar.
Quote:
Originally Posted by Jersey Mike
Do you have HID or halogen fogs?
|
LED bulbs in stock housings.
__________________
99 Z28 - SBE LS1/60e
Motor - 10.84 @ 128 - 1.47 60'
Nitrous - 10.16 @ 132 - 1.40 60"
|
|
|
08-16-2018, 07:58 PM
|
#1902
|
Meet Coordinator
Join Date: Jan 2008
Location: brick/pt. pleasant beach
Posts: 19,341
|
Leds should be directional, as they are light emitting diodes and diodes are directional. I would grab a test light and make sure you got pah and gruh.
Brown is power in from headlight switch.
Yellow is power out to fog lamp relay.
Light Green is indicator lamp.
Gray is switch illumination.
Black is ground.
The brown also feeds the power input side of the relay. The purple goes to the lights themselves.
|
|
|
08-17-2018, 08:45 AM
|
#1903
|
Power Member / trans break does not equal transbrake
Join Date: May 2009
Location: The Meadowlands
Posts: 4,513
|
were is this fog light relay you speak of?
And ill check to see if i have them backwards, but even if i did wouldnt the light on the switch light up ?
__________________
99 Z28 - SBE LS1/60e
Motor - 10.84 @ 128 - 1.47 60'
Nitrous - 10.16 @ 132 - 1.40 60"
Last edited by LS1ow; 08-17-2018 at 09:00 AM.
|
|
|
08-17-2018, 04:34 PM
|
#1904
|
Meet Coordinator
Join Date: Jan 2008
Location: brick/pt. pleasant beach
Posts: 19,341
|
Yeah switch would light up.
Driver side electrical center #1 which is closer to the strut tower. Its one of the two small relays. The other small one is the horn. The three large ones are for fans.
Last edited by sweetbmxrider; 08-17-2018 at 04:35 PM.
|
|
|
08-17-2018, 07:42 PM
|
#1905
|
Power Member / trans break does not equal transbrake
Join Date: May 2009
Location: The Meadowlands
Posts: 4,513
|
Switch was bad. Had extra one upstairs in shop from previous part out, we have illumination
__________________
99 Z28 - SBE LS1/60e
Motor - 10.84 @ 128 - 1.47 60'
Nitrous - 10.16 @ 132 - 1.40 60"
|
|
|
08-17-2018, 08:37 PM
|
#1906
|
Mongo the Meet Coordinator
Join Date: May 2008
Posts: 16,900
|
muy bien
__________________
Quote:
Originally Posted by KirkEvil
repo bigals turd gen and part it out to a loving home
|
|
|
|
08-18-2018, 08:16 AM
|
#1907
|
Join Date: Sep 2008
Location: Hackettstown, NJ
Posts: 1,638
|
Let there be light?
__________________
1998 Z-28 - SLP lid - Ported TB - LS6 Intake - Dynatech SS headers/Catted Y - Magnaflow Exh - 3.42 - Yank SS3600 - UMI weld-in subframe connectors, Adj LCA, Adj PHB, Q1A TA - Bolt-in Relocation Brackets - Strano springs - Koni shocks - 17" C6Z06 wheels - 326HP/335ft-lbs - 12.35 @ 110.41
Quote:
Originally Posted by Blackbirdws6
I can appreciate a dream but this person needed some real friends.
|
|
|
|
08-21-2018, 11:31 AM
|
#1908
|
Power Member / trans break does not equal transbrake
Join Date: May 2009
Location: The Meadowlands
Posts: 4,513
|
Was super dissapoint with the LED bulbs in the stock fog housings, and a big bad birdy told me HIDs dont fit well in them... so i compromised. Had a set of 3" round LED fog lights from #JeepLife laying around, and this is the end result.
Before, factory nonsense.
Now, Jeep Life.
They bolted right up to the factory mount using the factory hardware. Just had to bend the tabs out to clear the larger light housing. Im going to end up cutting them off so it looks cleaner. Will wire them up today and see how they are.
__________________
99 Z28 - SBE LS1/60e
Motor - 10.84 @ 128 - 1.47 60'
Nitrous - 10.16 @ 132 - 1.40 60"
Last edited by LS1ow; 08-21-2018 at 11:32 AM.
|
|
|
08-21-2018, 11:48 AM
|
#1909
|
Mongo the Meet Coordinator
Join Date: May 2008
Posts: 16,900
|
Do you have a jeep thing on your air dam as well....?
fuggin heep bros
__________________
Quote:
Originally Posted by KirkEvil
repo bigals turd gen and part it out to a loving home
|
|
|
|
08-21-2018, 04:06 PM
|
#1910
|
Resident Camera Guy
Join Date: Aug 2004
Location: North Jersey
Posts: 10,971
|
Got a part number on those? I was thinking of doing something similar on the Trans Am myself!
__________________
|
|
|
08-21-2018, 04:48 PM
|
#1911
|
Meet Coordinator
Join Date: Jan 2008
Location: brick/pt. pleasant beach
Posts: 19,341
|
Bls has a factory drop in setup that is led
|
|
|
08-22-2018, 06:33 AM
|
#1912
|
Power Member / trans break does not equal transbrake
Join Date: May 2009
Location: The Meadowlands
Posts: 4,513
|
Quote:
Originally Posted by LTb1ow
Do you have a jeep thing on your air dam as well....?
fuggin heep bros
|
Bruh your like 15 thread pages late on that.
Quote:
Originally Posted by ar0ck
Got a part number on those? I was thinking of doing something similar on the Trans Am myself!
|
Welp, recycling went out this morn so box is gone. Ill dig threw my amazon history.
Quote:
Originally Posted by sweetbmxrider
Bls has a factory drop in setup that is led
|
BLS texted me literally 24 hours after i did this offering me them.
__________________
99 Z28 - SBE LS1/60e
Motor - 10.84 @ 128 - 1.47 60'
Nitrous - 10.16 @ 132 - 1.40 60"
|
|
|
08-24-2018, 02:43 PM
|
#1913
|
Lord of the rings / 10 Second Club / Meet Coordinator
Join Date: Aug 2004
Location: Millstone Township, NJ
Posts: 6,359
|
So lights are cool and all but has this thing made a pass down the 1/4 yet? (Consequences!)
__________________
97 T/A Ram Air Convt
Forever dyno queen / 777rwhp 662 rwtq @ 17lbs / 10.2 @ 140
'24 Corvette Z06
17 Sierra 2500HD Dmax
81 Turbo TA
|
|
|
08-24-2018, 03:13 PM
|
#1914
|
Power Member / trans break does not equal transbrake
Join Date: May 2009
Location: The Meadowlands
Posts: 4,513
|
Quote:
Originally Posted by Blackbirdws6
So lights are cool and all but has this thing made a pass down the 1/4 yet? (Consequences!)
|
Sadly i havent even really had the chance to beat on it. I have the front end apart for some other things besides dem LEDs, and i just got the injectors back from being cleaned and matched. Theyre in already, but im dead in the water without a new flash to the PCM for the larger injectors/other changes.
__________________
99 Z28 - SBE LS1/60e
Motor - 10.84 @ 128 - 1.47 60'
Nitrous - 10.16 @ 132 - 1.40 60"
|
|
|
08-27-2018, 03:18 PM
|
#1915
|
Power Member / trans break does not equal transbrake
Join Date: May 2009
Location: The Meadowlands
Posts: 4,513
|
Finally had a sec to wire the LED fogs up. They are a flood beam so they kinda throw light everywhere. But i think them sitting so back in the bumper will help not destroy oncoming traffics retinas .
__________________
99 Z28 - SBE LS1/60e
Motor - 10.84 @ 128 - 1.47 60'
Nitrous - 10.16 @ 132 - 1.40 60"
|
|
|
08-27-2018, 03:24 PM
|
#1916
|
Lord of the rings / 10 Second Club / Meet Coordinator
Join Date: Aug 2004
Location: Millstone Township, NJ
Posts: 6,359
|
You're now "that guy".
__________________
97 T/A Ram Air Convt
Forever dyno queen / 777rwhp 662 rwtq @ 17lbs / 10.2 @ 140
'24 Corvette Z06
17 Sierra 2500HD Dmax
81 Turbo TA
|
|
|
08-27-2018, 03:42 PM
|
#1917
|
Power Member / trans break does not equal transbrake
Join Date: May 2009
Location: The Meadowlands
Posts: 4,513
|
Part 2 of front end off shens is this.
Ive been planning on changing the intake set up and i wanted to do so before the car hits the dyno. I came across a deal on a Chris1313 Non Ac ram air set up so i scooped that up. And i also came a cross a 104mm lid to go with it as well in place of the cracked SLP lid. Previously the transcooler was mounted at the bottom of the rad, that needed to be moved to fit the larger non AC ram air set up. The lid should be here today or tomorrow.
__________________
99 Z28 - SBE LS1/60e
Motor - 10.84 @ 128 - 1.47 60'
Nitrous - 10.16 @ 132 - 1.40 60"
|
|
|
08-27-2018, 03:51 PM
|
#1918
|
Join Date: Nov 2007
Location: Jackson, NJ
Posts: 1,723
|
That intake is neat-o. Do other people have issues with overheating when they run it? it looks like it covers the majority of the radiator.
__________________
1983 camaro- Scrap
1988 camaro- Also scrap
'05 Silverado- You guessed it, scrap
1988 TRX 250R- Ported w/ high compression on 110 octane- Out 60' your LT1
Jersey Shore Street Car Takeover (JSSCT) Founder
Quote:
Originally Posted by LS1ow
and once i get PHB, what do i ajust it too?
|
Quote:
Originally Posted by Jersey Mike
Seven.
|
|
|
|
08-27-2018, 03:57 PM
|
#1919
|
Power Member / trans break does not equal transbrake
Join Date: May 2009
Location: The Meadowlands
Posts: 4,513
|
Quote:
Originally Posted by wretched73
That intake is neat-o. Do other people have issues with overheating when they run it? it looks like it covers the majority of the radiator.
|
Its hard to tell in the pics but it doesnt sit right against the rad with exception of the top 2" or so were it goes into the air lid. It covers the front of the rad, but none of the air that comes up from the bottom off the little plastic air duct thing. And i think thats were the rad gets most of its cooling from.
__________________
99 Z28 - SBE LS1/60e
Motor - 10.84 @ 128 - 1.47 60'
Nitrous - 10.16 @ 132 - 1.40 60"
Last edited by LS1ow; 08-27-2018 at 03:58 PM.
|
|
|
08-27-2018, 04:22 PM
|
#1920
|
Meet Coordinator
Join Date: Jan 2008
Location: brick/pt. pleasant beach
Posts: 19,341
|
Yeah it would be very similar to stock since there is a plastic shroud to help channel air from the air dam across the radiator. If anything, adding more material to block the air from going anywhere else but the radiator would be a good thing.
|
|
|
08-28-2018, 08:49 AM
|
#1921
|
Power Member / trans break does not equal transbrake
Join Date: May 2009
Location: The Meadowlands
Posts: 4,513
|
Welp, this rad talk must have jinxed me. Pulled the car out of the garage to work on another project inside. Let the car idle for a few mins just to get some fluid moving... andddd its leaking coolant. The bottom of the ram air is pretty sharp, i must have sliced into the rad a bit when installing. New rad is on the way.
__________________
99 Z28 - SBE LS1/60e
Motor - 10.84 @ 128 - 1.47 60'
Nitrous - 10.16 @ 132 - 1.40 60"
|
|
|
08-28-2018, 10:15 AM
|
#1922
|
Join Date: Sep 2008
Location: Hackettstown, NJ
Posts: 1,638
|
Quote:
Originally Posted by LS1ow
i just got the injectors back from being cleaned and matched.
|
Who'd you send the injectors to?
__________________
1998 Z-28 - SLP lid - Ported TB - LS6 Intake - Dynatech SS headers/Catted Y - Magnaflow Exh - 3.42 - Yank SS3600 - UMI weld-in subframe connectors, Adj LCA, Adj PHB, Q1A TA - Bolt-in Relocation Brackets - Strano springs - Koni shocks - 17" C6Z06 wheels - 326HP/335ft-lbs - 12.35 @ 110.41
Quote:
Originally Posted by Blackbirdws6
I can appreciate a dream but this person needed some real friends.
|
|
|
|
08-28-2018, 10:15 AM
|
#1923
|
Lord of the rings / 10 Second Club / Meet Coordinator
Join Date: Aug 2004
Location: Millstone Township, NJ
Posts: 6,359
|
Pretty rad bro. Clock is ticking!
__________________
97 T/A Ram Air Convt
Forever dyno queen / 777rwhp 662 rwtq @ 17lbs / 10.2 @ 140
'24 Corvette Z06
17 Sierra 2500HD Dmax
81 Turbo TA
|
|
|
08-28-2018, 12:47 PM
|
#1924
|
Power Member / trans break does not equal transbrake
Join Date: May 2009
Location: The Meadowlands
Posts: 4,513
|
Quote:
Originally Posted by The_Bishop
Who'd you send the injectors to?
|
My tuner has the machine at his shop in linden
http://www.speedperf6rmanc3.com/
__________________
99 Z28 - SBE LS1/60e
Motor - 10.84 @ 128 - 1.47 60'
Nitrous - 10.16 @ 132 - 1.40 60"
|
|
|
08-28-2018, 08:04 PM
|
#1925
|
Join Date: Sep 2008
Location: Hackettstown, NJ
Posts: 1,638
|
Nice. May have mine done at some point. What injectors you have in yours?
__________________
1998 Z-28 - SLP lid - Ported TB - LS6 Intake - Dynatech SS headers/Catted Y - Magnaflow Exh - 3.42 - Yank SS3600 - UMI weld-in subframe connectors, Adj LCA, Adj PHB, Q1A TA - Bolt-in Relocation Brackets - Strano springs - Koni shocks - 17" C6Z06 wheels - 326HP/335ft-lbs - 12.35 @ 110.41
Quote:
Originally Posted by Blackbirdws6
I can appreciate a dream but this person needed some real friends.
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
|
|