![Reply](http://www.njfboa.org/forums/images/buttons/reply.gif) |
|
02-07-2021, 07:44 PM
|
#201
|
Join Date: Sep 2008
Location: Hackettstown, NJ
Posts: 1,634
|
Well, if you ever need to empty a swimming pool you'll be set.
__________________
1998 Z-28 - SLP lid - Ported TB - LS6 Intake - Dynatech SS headers/Catted Y - Magnaflow Exh - 3.42 - Yank SS3600 - UMI weld-in subframe connectors, Adj LCA, Adj PHB, Q1A TA - Bolt-in Relocation Brackets - Strano springs - Koni shocks - 17" C6Z06 wheels - 326HP/335ft-lbs - 12.35 @ 110.41
Quote:
Originally Posted by Blackbirdws6
I can appreciate a dream but this person needed some real friends.
|
|
|
|
02-13-2021, 10:07 AM
|
#202
|
Mongo the Meet Coordinator
Join Date: May 2008
Posts: 16,899
|
Yanked off the driver side header to check for flatness and or, look for stripped threads in head. Def had a leak at the cylidner I thouhgt I had stripped
Then started the new MSD wires, got lent this fancy tool
Out with the old wires
New coil side in car
New wires on engine side
Header will go to a machine shop over the week and hopefully that fixes the leak at cold idle.
Slow progress towards dyno day.
__________________
Quote:
Originally Posted by KirkEvil
repo bigals turd gen and part it out to a loving home
|
|
|
|
02-13-2021, 02:53 PM
|
#203
|
Mongo the Meet Coordinator
Join Date: May 2008
Posts: 16,899
|
Finished up the passenger side, and finally sat down to test the reistance off the wires.
This was a bad one
Ended up cutting two ends off to get readings
So, it seems I had been running around with a V6
Not sure I trust these numbers, but, if so, thats a lot of power/fuel being wasted.
__________________
Quote:
Originally Posted by KirkEvil
repo bigals turd gen and part it out to a loving home
|
|
|
|
02-13-2021, 04:14 PM
|
#204
|
Lord of the rings / 10 Second Club / Meet Coordinator
Join Date: Aug 2004
Location: Millstone Township, NJ
Posts: 6,357
|
That's quite the leak. Def makes mine looks like nothing. On the readings, MSD 8.5 wires should have 50 ohms of resistance per foot.
Nice we both put our cars into non running status on the same weekend.
__________________
97 T/A Ram Air Convt
Forever dyno queen / 777rwhp 662 rwtq @ 17lbs / 10.2 @ 140
'24 Corvette Z06
17 Sierra 2500HD Dmax
81 Turbo TA
|
|
|
02-13-2021, 04:18 PM
|
#205
|
Mongo the Meet Coordinator
Join Date: May 2008
Posts: 16,899
|
Quote:
Originally Posted by Blackbirdws6
That's quite the leak. Def makes mine looks like nothing. On the readings, MSD 8.5 wires should have 50 ohms of resistance per foot.
Nice we both put our cars into non running status on the same weekend.
|
This is the way.
And not too concerned with resistance readings, questionable meter etc. New wires are much better looking and have proper depth in coils.
Fuel pump gets swapped tmmr. Slowly crossing things off.
__________________
Quote:
Originally Posted by KirkEvil
repo bigals turd gen and part it out to a loving home
|
|
|
|
02-13-2021, 08:03 PM
|
#206
|
10 Second Club / Meet Coordinator
Join Date: Dec 2004
Location: Roxbury, NJ
Posts: 2,111
|
dang! spark plug wire testing at the kitchen table !!!
yea, a new set is the right plan, good stuff.
wouldn't your AFR readings and datalogs shown you had a dead hole or two though?
__________________
1987 IROC-Z - modified
|
|
|
02-13-2021, 09:14 PM
|
#207
|
Mongo the Meet Coordinator
Join Date: May 2008
Posts: 16,899
|
Quote:
Originally Posted by IROCZman15
dang! spark plug wire testing at the kitchen table !!!
yea, a new set is the right plan, good stuff.
wouldn't your AFR readings and datalogs shown you had a dead hole or two though?
|
Yea I'd imagine two dead cylinders would immediately show up on datalog so just assuming these cylinders were on borrowed time. Happy I could finally got around to fixing the wires
__________________
Quote:
Originally Posted by KirkEvil
repo bigals turd gen and part it out to a loving home
|
|
|
|
02-16-2021, 03:39 PM
|
#208
|
Mongo the Meet Coordinator
Join Date: May 2008
Posts: 16,899
|
And, flange is flat. Local machine shop did it for $75, which I thought wasn't terrible for flycutting it vs the ole belt sander.
__________________
Quote:
Originally Posted by KirkEvil
repo bigals turd gen and part it out to a loving home
|
Last edited by LTb1ow; 02-16-2021 at 03:40 PM.
|
|
|
02-20-2021, 04:47 PM
|
#209
|
Mongo the Meet Coordinator
Join Date: May 2008
Posts: 16,899
|
Successful day back in the garage.
Tremec app measured the driveline angles just wanted to be sure I am good to go
Fuel Temp sensor stuck in regulator
And took it around town, took forever to get oil and coolant up to temp. Darn winter.
__________________
Quote:
Originally Posted by KirkEvil
repo bigals turd gen and part it out to a loving home
|
|
|
|
02-20-2021, 06:59 PM
|
#210
|
Join Date: Sep 2008
Location: Hackettstown, NJ
Posts: 1,634
|
Looks snazzy.
__________________
1998 Z-28 - SLP lid - Ported TB - LS6 Intake - Dynatech SS headers/Catted Y - Magnaflow Exh - 3.42 - Yank SS3600 - UMI weld-in subframe connectors, Adj LCA, Adj PHB, Q1A TA - Bolt-in Relocation Brackets - Strano springs - Koni shocks - 17" C6Z06 wheels - 326HP/335ft-lbs - 12.35 @ 110.41
Quote:
Originally Posted by Blackbirdws6
I can appreciate a dream but this person needed some real friends.
|
|
|
|
02-20-2021, 07:13 PM
|
#211
|
Lord of the rings / 10 Second Club / Meet Coordinator
Join Date: Aug 2004
Location: Millstone Township, NJ
Posts: 6,357
|
Such fancy
__________________
97 T/A Ram Air Convt
Forever dyno queen / 777rwhp 662 rwtq @ 17lbs / 10.2 @ 140
'24 Corvette Z06
17 Sierra 2500HD Dmax
81 Turbo TA
|
|
|
02-20-2021, 07:15 PM
|
#212
|
Mongo the Meet Coordinator
Join Date: May 2008
Posts: 16,899
|
Days like today make me seriously consider how to rig up a heater core in teh car.
I think I could use the oil cooler loop, a junkyard heater core, and a stack of PC fans to get some heat in the car...
__________________
Quote:
Originally Posted by KirkEvil
repo bigals turd gen and part it out to a loving home
|
|
|
|
02-20-2021, 07:51 PM
|
#213
|
Admin.
Join Date: Aug 2005
Location: Hamilton, NJ
Posts: 20,149
|
__________________
Vent Windows Forever!
The looser the waistband, the deeper the quicksand. Or so I have read.
Feather-light suspension, Konis just couldn't hold. I'm so glad I took a look inside your showroom doors.
Hey everybody, it's good to have you on the Baba-too-da-ba-too-ba-ba-buh-doo-ga-ga-bop-a-dop
|
|
|
02-20-2021, 07:51 PM
|
#214
|
Join Date: Sep 2008
Location: Hackettstown, NJ
Posts: 1,634
|
__________________
1998 Z-28 - SLP lid - Ported TB - LS6 Intake - Dynatech SS headers/Catted Y - Magnaflow Exh - 3.42 - Yank SS3600 - UMI weld-in subframe connectors, Adj LCA, Adj PHB, Q1A TA - Bolt-in Relocation Brackets - Strano springs - Koni shocks - 17" C6Z06 wheels - 326HP/335ft-lbs - 12.35 @ 110.41
Quote:
Originally Posted by Blackbirdws6
I can appreciate a dream but this person needed some real friends.
|
|
|
|
02-21-2021, 05:25 AM
|
#215
|
Meet Coordinator
Join Date: Jan 2008
Location: brick/pt. pleasant beach
Posts: 19,341
|
Agreed, electric heater is the way to go
|
|
|
03-02-2021, 04:12 PM
|
#216
|
Mongo the Meet Coordinator
Join Date: May 2008
Posts: 16,899
|
__________________
Quote:
Originally Posted by KirkEvil
repo bigals turd gen and part it out to a loving home
|
|
|
|
03-02-2021, 08:43 PM
|
#217
|
Lord of the rings / 10 Second Club / Meet Coordinator
Join Date: Aug 2004
Location: Millstone Township, NJ
Posts: 6,357
|
Is the silly straw necessary? Honestly asking.
__________________
97 T/A Ram Air Convt
Forever dyno queen / 777rwhp 662 rwtq @ 17lbs / 10.2 @ 140
'24 Corvette Z06
17 Sierra 2500HD Dmax
81 Turbo TA
|
|
|
03-03-2021, 06:21 AM
|
#218
|
Mongo the Meet Coordinator
Join Date: May 2008
Posts: 16,899
|
Quote:
Originally Posted by Blackbirdws6
Is the silly straw necessary? Honestly asking.
|
Allegedly the added volume before sensor will help dampen pressure waves from valves opening etc. So rather than run the line around the bay, its easier to just silly straw it. Also shields the sensor from the heat of exhaust gas.
__________________
Quote:
Originally Posted by KirkEvil
repo bigals turd gen and part it out to a loving home
|
|
|
|
03-03-2021, 06:40 AM
|
#219
|
Power Member / trans break does not equal transbrake
Join Date: May 2009
Location: The Meadowlands
Posts: 4,513
|
wtf is that thing that looks like a solid bar coming off the bottom of the rad support that appears to be sawed in half?
__________________
99 Z28 - SBE LS1/60e
Motor - 10.84 @ 128 - 1.47 60'
Nitrous - 10.16 @ 132 - 1.40 60"
|
|
|
03-03-2021, 07:29 AM
|
#220
|
Mongo the Meet Coordinator
Join Date: May 2008
Posts: 16,899
|
Quote:
Originally Posted by LS1ow
wtf is that thing that looks like a solid bar coming off the bottom of the rad support that appears to be sawed in half?
|
Was a turbo support, we tweaked the hotside for downpipe fit and the mount didn't fit anymore. Decided SCH10 is more than beefy enough to hold up a tiny turbo.
__________________
Quote:
Originally Posted by KirkEvil
repo bigals turd gen and part it out to a loving home
|
|
|
|
03-03-2021, 12:23 PM
|
#221
|
Mongo the Meet Coordinator
Join Date: May 2008
Posts: 16,899
|
Finally got around to finishing this side project up. ABS sensor repurposed to a speed sensor. After dyno is done, I can now play with traction control based off comparing front wheel speed to VSS signal and pulling timing based on slip.
__________________
Quote:
Originally Posted by KirkEvil
repo bigals turd gen and part it out to a loving home
|
|
|
|
03-03-2021, 12:40 PM
|
#222
|
Lord of the rings / 10 Second Club / Meet Coordinator
Join Date: Aug 2004
Location: Millstone Township, NJ
Posts: 6,357
|
Quote:
Originally Posted by LTb1ow
Allegedly the added volume before sensor will help dampen pressure waves from valves opening etc. So rather than run the line around the bay, its easier to just silly straw it. Also shields the sensor from the heat of exhaust gas.
|
Actually makes some good sense.
Is there the ability to setup that if the tires slip that the car will scream "Nooo, Monicaaaaaa" from the speakers?
__________________
97 T/A Ram Air Convt
Forever dyno queen / 777rwhp 662 rwtq @ 17lbs / 10.2 @ 140
'24 Corvette Z06
17 Sierra 2500HD Dmax
81 Turbo TA
|
|
|
03-03-2021, 02:13 PM
|
#223
|
Join Date: Nov 2007
Location: Jackson, NJ
Posts: 1,723
|
Quote:
Originally Posted by Blackbirdws6
Actually makes some good sense.
Is there the ability to setup that if the tires slip that the car will scream "Nooo, Monicaaaaaa" from the speakers?
|
He hasn't finished that one yet. So far, if he spins and gets out of it, it screams "Still a buster"
__________________
1983 camaro- Scrap
1988 camaro- Also scrap
'05 Silverado- You guessed it, scrap
1988 TRX 250R- Ported w/ high compression on 110 octane- Out 60' your LT1
Jersey Shore Street Car Takeover (JSSCT) Founder
Quote:
Originally Posted by LS1ow
and once i get PHB, what do i ajust it too?
|
Quote:
Originally Posted by Jersey Mike
Seven.
|
|
|
|
03-08-2021, 03:57 PM
|
#224
|
Mongo the Meet Coordinator
Join Date: May 2008
Posts: 16,899
|
Wired up my sloppy water injection setup and verified it works
No it is no permanent.
__________________
Quote:
Originally Posted by KirkEvil
repo bigals turd gen and part it out to a loving home
|
Last edited by LTb1ow; 03-08-2021 at 03:57 PM.
|
|
|
03-11-2021, 06:45 AM
|
#225
|
Power Member / trans break does not equal transbrake
Join Date: May 2009
Location: The Meadowlands
Posts: 4,513
|
ok im starting to get nervous.
__________________
99 Z28 - SBE LS1/60e
Motor - 10.84 @ 128 - 1.47 60'
Nitrous - 10.16 @ 132 - 1.40 60"
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
|
|