![Reply](http://www.njfboa.org/forums/images/buttons/reply.gif) |
12-27-2015, 04:54 PM
|
#1
|
Join Date: Dec 2009
Location: milltown
Posts: 1,497
|
9in for my Camaro
decided that after the rental i should probably get a rear, 20 passes and clenching my butt cheeks on every one. i ponied up for a 9in ford engineered unit. i bought everything on black friday so saved some money with 10% off from moser and quick performance. it is built to hold way more than what im making now and probably will survive with whatever i throw at it in the future.
Moser housing fully gusseted and braced
1/2in screw in studs
fill/drain holes installed
stock width
31 spline axles
yukon aluminum third member
yukon trac-lok posi
4.11 gears
1350 yoke
third member assembled by quick performance.
rear brakes were upgrade to lt1 since the older third gen backing plates will not work without modifying them.
the install went fine, things fit perfectly. honest rookie mistake when pressing on the axle bearings.. i assembled them with the backing plates on the wrong sides (9in axles are different lengths). so that was a costly mistake with shop fees and the cost of new bearings. i also noticed the car does sit 3/4-1in higher than the rear due to the tall spring perches so i will have to get shorter springs for my weight jacks
havent really flogged on it yet, i really want to see how the car likes the gear. it is quiet with a slight whine on decel, kinda bummed about it but i will live with it.
overall i am happy with how it looks and now really cant wait for the racing season and hopefully another track rental
here are some pics
__________________
2002 Camaro Sunset Orange Mettalic, V6, 5spd, bilstein HD shocks and struts, eibach pro lowering kit, eibach f/r sway bars, lakewood PHB, UMI 2 point subframe connectors, energy suspensions poly master bushing kit
daily econobox and first car
1986 IROC-Z, T56, MGW shifter, Heads, Cam, Holley Stealth Ram 350, t-top, tubular LCA with relo brackets, adjustable PHB, belltech sway bars, ground control weight jacks, SLP mid length headers, 3in w/borla XR1, RIP 3 10 bolts, 12.7 @ 109 so far.. atleast its faster than stock SOLD
1971 Camaro LS3/T56/9in, cam only and still carbed, RIP 2 10 bolts, 11.62@121
03 Blazer 2 door - salt sponge
|
|
|
12-27-2015, 05:50 PM
|
#2
|
Join Date: Mar 2011
Location: Morris County
Posts: 1,033
|
That's sweet. My dad and I just installed today a 9" into his 66 lemans from quick performance. Why didn't you have quick press the bearings on the axles.
__________________
94 Trans am 25th anniversary
86 Buick Regal T-type
73 camaro 454/T56 work in progress.
|
|
|
12-27-2015, 06:47 PM
|
#3
|
Join Date: Dec 2009
Location: milltown
Posts: 1,497
|
Quote:
Originally Posted by grazi
That's sweet. My dad and I just installed today a 9" into his 66 lemans from quick performance. Why didn't you have quick press the bearings on the axles.
|
The axles and housing came from Moser. Quick only did the center section. The brake backing plate needs to go on first then the bearings get pressed on then it gets bolted to the housing. So the backing plate literally holds the axle in.
I would've ordered everything from quick but they weren't discounting their housing and Moser was. In the end I got the Moser housing and axles for what I would have paid quick.
__________________
2002 Camaro Sunset Orange Mettalic, V6, 5spd, bilstein HD shocks and struts, eibach pro lowering kit, eibach f/r sway bars, lakewood PHB, UMI 2 point subframe connectors, energy suspensions poly master bushing kit
daily econobox and first car
1986 IROC-Z, T56, MGW shifter, Heads, Cam, Holley Stealth Ram 350, t-top, tubular LCA with relo brackets, adjustable PHB, belltech sway bars, ground control weight jacks, SLP mid length headers, 3in w/borla XR1, RIP 3 10 bolts, 12.7 @ 109 so far.. atleast its faster than stock SOLD
1971 Camaro LS3/T56/9in, cam only and still carbed, RIP 2 10 bolts, 11.62@121
03 Blazer 2 door - salt sponge
|
|
|
12-27-2015, 07:16 PM
|
#4
|
10 Second Club / Meet Coordinator
Join Date: Dec 2004
Location: Roxbury, NJ
Posts: 2,111
|
oh wow, thats a killer upgrade. very awesome. one day ill be due for a whole rear setup, but I'm hoping the C4 rear brake kit and adapter plates can still be used, I haven't researched it yet, but I am assuming it will not be a problem since moser, currie, and strange can accommodate many combinations
__________________
1987 IROC-Z - modified
|
|
|
12-27-2015, 07:25 PM
|
#5
|
Join Date: Dec 2009
Location: milltown
Posts: 1,497
|
Quote:
Originally Posted by IROCZman15
oh wow, thats a killer upgrade. very awesome. one day ill be due for a whole rear setup, but I'm hoping the C4 rear brake kit and adapter plates can still be used, I haven't researched it yet, but I am assuming it will not be a problem since moser, currie, and strange can accommodate many combinations
|
Thanks man. From what I've read you need to use lt1 style backing plates. I'm not familiar with the c4 brake upgrade but it may be easier to make an adaptor for the brakes
__________________
2002 Camaro Sunset Orange Mettalic, V6, 5spd, bilstein HD shocks and struts, eibach pro lowering kit, eibach f/r sway bars, lakewood PHB, UMI 2 point subframe connectors, energy suspensions poly master bushing kit
daily econobox and first car
1986 IROC-Z, T56, MGW shifter, Heads, Cam, Holley Stealth Ram 350, t-top, tubular LCA with relo brackets, adjustable PHB, belltech sway bars, ground control weight jacks, SLP mid length headers, 3in w/borla XR1, RIP 3 10 bolts, 12.7 @ 109 so far.. atleast its faster than stock SOLD
1971 Camaro LS3/T56/9in, cam only and still carbed, RIP 2 10 bolts, 11.62@121
03 Blazer 2 door - salt sponge
|
|
|
12-28-2015, 06:40 AM
|
#6
|
NJFBOA Co-Founder
Join Date: Jul 2004
Location: All up in your kool aid!
Posts: 12,235
|
Congrats on the upgrade. A little more gear and being able to launch fearlessly will make for some fun passes when the tracks open back up.
|
|
|
12-28-2015, 08:17 AM
|
#7
|
Lord of the rings / 10 Second Club / Meet Coordinator
Join Date: Aug 2004
Location: Millstone Township, NJ
Posts: 6,357
|
Looks real nice. What clutch do you have in the car?
__________________
97 T/A Ram Air Convt
Forever dyno queen / 777rwhp 662 rwtq @ 17lbs / 10.2 @ 140
'24 Corvette Z06
17 Sierra 2500HD Dmax
81 Turbo TA
|
|
|
12-28-2015, 08:32 AM
|
#8
|
Admin.
Join Date: Aug 2005
Location: Hamilton, NJ
Posts: 20,149
|
new parts, woot!
Is your driveshaft damaged?
__________________
Vent Windows Forever!
The looser the waistband, the deeper the quicksand. Or so I have read.
Feather-light suspension, Konis just couldn't hold. I'm so glad I took a look inside your showroom doors.
Hey everybody, it's good to have you on the Baba-too-da-ba-too-ba-ba-buh-doo-ga-ga-bop-a-dop
|
|
|
12-28-2015, 08:52 AM
|
#9
|
Join Date: Dec 2009
Location: milltown
Posts: 1,497
|
Quote:
Originally Posted by Blackbirdws6
Looks real nice. What clutch do you have in the car?
|
stock lt1 for now. i will be changing it out before next season
Quote:
Originally Posted by BonzoHansen
new parts, woot!
Is your driveshaft damaged?
|
i dont think it is, do see something that isnt in line? that pic just shows the new u-joint. i had to get the 1310->1350 conversion.
__________________
2002 Camaro Sunset Orange Mettalic, V6, 5spd, bilstein HD shocks and struts, eibach pro lowering kit, eibach f/r sway bars, lakewood PHB, UMI 2 point subframe connectors, energy suspensions poly master bushing kit
daily econobox and first car
1986 IROC-Z, T56, MGW shifter, Heads, Cam, Holley Stealth Ram 350, t-top, tubular LCA with relo brackets, adjustable PHB, belltech sway bars, ground control weight jacks, SLP mid length headers, 3in w/borla XR1, RIP 3 10 bolts, 12.7 @ 109 so far.. atleast its faster than stock SOLD
1971 Camaro LS3/T56/9in, cam only and still carbed, RIP 2 10 bolts, 11.62@121
03 Blazer 2 door - salt sponge
|
|
|
12-28-2015, 09:21 AM
|
#10
|
Meet Coordinator
Join Date: Jan 2008
Location: brick/pt. pleasant beach
Posts: 19,341
|
It looks fouled up where the cap sits, probably from removal and install. I'd run it!
|
|
|
12-28-2015, 12:29 PM
|
#11
|
Join Date: Dec 2009
Location: milltown
Posts: 1,497
|
Quote:
Originally Posted by sweetbmxrider
It looks fouled up where the cap sits, probably from removal and install. I'd run it!
|
you right it does look kinda boogered up. but it really isnt, well alteast i dont think. so far so good lol
__________________
2002 Camaro Sunset Orange Mettalic, V6, 5spd, bilstein HD shocks and struts, eibach pro lowering kit, eibach f/r sway bars, lakewood PHB, UMI 2 point subframe connectors, energy suspensions poly master bushing kit
daily econobox and first car
1986 IROC-Z, T56, MGW shifter, Heads, Cam, Holley Stealth Ram 350, t-top, tubular LCA with relo brackets, adjustable PHB, belltech sway bars, ground control weight jacks, SLP mid length headers, 3in w/borla XR1, RIP 3 10 bolts, 12.7 @ 109 so far.. atleast its faster than stock SOLD
1971 Camaro LS3/T56/9in, cam only and still carbed, RIP 2 10 bolts, 11.62@121
03 Blazer 2 door - salt sponge
|
|
|
12-28-2015, 01:02 PM
|
#12
|
Meet Coordinator
Join Date: Jan 2008
Location: brick/pt. pleasant beach
Posts: 19,341
|
The body of the u joint will hit when pressing especially with the new larger joint
|
|
|
12-28-2015, 01:06 PM
|
#13
|
Admin.
Join Date: Aug 2005
Location: Hamilton, NJ
Posts: 20,149
|
Yes, that is what I saw. A new drive shaft is probably next on the list anyway as it is the new soft spot. ![Smile](http://www.njfboa.org/forums/images/smilies/icon_smile.gif) When you do get better u joints too, not ones with grease fittings.
__________________
Vent Windows Forever!
The looser the waistband, the deeper the quicksand. Or so I have read.
Feather-light suspension, Konis just couldn't hold. I'm so glad I took a look inside your showroom doors.
Hey everybody, it's good to have you on the Baba-too-da-ba-too-ba-ba-buh-doo-ga-ga-bop-a-dop
|
|
|
12-28-2015, 10:17 PM
|
#14
|
^^^Lover of bad cars^^^ Meet Coordinator
Join Date: Aug 2007
Location: Whitehouse Station
Posts: 2,255
|
I'm PBnJelly
__________________
1986 Honda VFR750 - 89.3HP to the wheel
2000 Trans Am M6 - Mods: Yes.
2018 Durango R/T - AFE Intake, JLT Catch Can, Stainless Works Catback, Vinyl Dodge Racing Stripes
2003 Toyota Matrix XRS M6 - Lol
|
|
|
12-29-2015, 09:57 AM
|
#15
|
Mongo the Meet Coordinator
Join Date: May 2008
Posts: 16,899
|
Quote:
Originally Posted by BonzoHansen
Yes, that is what I saw. A new drive shaft is probably next on the list anyway as it is the new soft spot. ![Smile](http://www.njfboa.org/forums/images/smilies/icon_smile.gif) When you do get better u joints too, not ones with grease fittings.
|
I have grease fittings in mine, so far so good.
__________________
Quote:
Originally Posted by KirkEvil
repo bigals turd gen and part it out to a loving home
|
|
|
|
12-29-2015, 12:01 PM
|
#16
|
Join Date: Dec 2009
Location: milltown
Posts: 1,497
|
Quote:
Originally Posted by BonzoHansen
Yes, that is what I saw. A new drive shaft is probably next on the list anyway as it is the new soft spot. ![Smile](http://www.njfboa.org/forums/images/smilies/icon_smile.gif) When you do get better u joints too, not ones with grease fittings.
|
are they weaker? they are Spicer so hopefully they arent junk lol
__________________
2002 Camaro Sunset Orange Mettalic, V6, 5spd, bilstein HD shocks and struts, eibach pro lowering kit, eibach f/r sway bars, lakewood PHB, UMI 2 point subframe connectors, energy suspensions poly master bushing kit
daily econobox and first car
1986 IROC-Z, T56, MGW shifter, Heads, Cam, Holley Stealth Ram 350, t-top, tubular LCA with relo brackets, adjustable PHB, belltech sway bars, ground control weight jacks, SLP mid length headers, 3in w/borla XR1, RIP 3 10 bolts, 12.7 @ 109 so far.. atleast its faster than stock SOLD
1971 Camaro LS3/T56/9in, cam only and still carbed, RIP 2 10 bolts, 11.62@121
03 Blazer 2 door - salt sponge
|
|
|
12-29-2015, 12:23 PM
|
#17
|
Meet Coordinator
Join Date: Jan 2008
Location: brick/pt. pleasant beach
Posts: 19,341
|
That is what they say since they have pathways in them for grease.
|
|
|
12-29-2015, 12:31 PM
|
#18
|
Admin.
Join Date: Aug 2005
Location: Hamilton, NJ
Posts: 20,149
|
Yup. Not junk but not strongest either.
__________________
Vent Windows Forever!
The looser the waistband, the deeper the quicksand. Or so I have read.
Feather-light suspension, Konis just couldn't hold. I'm so glad I took a look inside your showroom doors.
Hey everybody, it's good to have you on the Baba-too-da-ba-too-ba-ba-buh-doo-ga-ga-bop-a-dop
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
|
|