![Reply](http://www.njfboa.org/forums/images/buttons/reply.gif) |
06-09-2013, 12:09 PM
|
#1
|
Join Date: Mar 2011
Location: Morris County
Posts: 1,033
|
Couple racing questions
With Island maybe opening again and reading all of these badass turbo builds, I got the bug to go fast. I figured I'd get some opinions on what would be the best bang for the buck. I'm limited with budget to get only one at a time.
1: Drag Radials
2: New posi and 3.73's (3.23's now)
3:Converter
Those who dont know: I have a LT Juan trans am with ram air and SLP catback. Ran 13.65 at One hundo MPH's. Posi wore out last year so Im lenaing towards Option 2 since I aint doin no drag racing with one wheel peel. Figured it would be the time to upgrade to 3.73's while the posi is being done.
What do you guys think?
__________________
94 Trans am 25th anniversary
86 Buick Regal T-type
73 camaro 454/T56 work in progress.
|
|
|
06-09-2013, 12:56 PM
|
#2
|
Join Date: Jun 2007
Location: Arm pit of the world... NJ
Posts: 2,676
|
Fix the rear. May as well do gears while you are there.
__________________
John
|
|
|
06-09-2013, 01:06 PM
|
#3
|
Join Date: Nov 2012
Location: Millstone, NJ
Posts: 641
|
New posi and gears, converter, radials
__________________
94 TA GT. Stock 350, cam, exhaust
|
|
|
06-09-2013, 03:13 PM
|
#4
|
10 Second Club
Join Date: Feb 2008
Location: Eatontown
Posts: 1,647
|
Fixing whatever is broken should be your first priority. You might see .1 off from 3.73 gears but don't expect much change. A converter would drop the most time off
__________________
1999 C5 FRC: 12.7@114
2008 TBSS: 12.48@108
2017 Silverado 2500 do you even lift breh?
|
|
|
06-09-2013, 03:26 PM
|
#5
|
Power Member/NJFBOA Bookie/Moderator
Join Date: Jun 2009
Location: North Jersey = Best Jersey.
Posts: 4,435
|
I'm currently looking into a converter myself, but at $800+shipping+misc, it adds up pretty fast.
How much racing are you planning on doing?
__________________
1995 Firebird... Stock-ish.
Quote:
Originally Posted by LS1ow
Good. He microwaved my phone 6 years ago, i hope his intake erupts.
|
|
|
|
06-09-2013, 03:35 PM
|
#6
|
Mongo the Meet Coordinator
Join Date: May 2008
Posts: 16,899
|
Quote:
Originally Posted by Jersey Mike
I'm currently looking into a converter myself, but at $800+shipping+misc, it adds up pretty fast.
How much racing are you planning on doing?
|
Get an Edge or Revmax if you know you will never go past bolt ons. Round 450 for one of them.
As stated, fix the rear (which you really can't with a 10 bolt), toss a converter in, and get some MT ET street radials. Also, a trans shift kit may not hurt either.
3000-3400 range on the converter, depending again on how far past bolt ons you wanna go. You will need/want at least a mail order tune for the gears and shift points, potentially fixing a stall wall issue as well.
|
|
|
06-09-2013, 04:37 PM
|
#7
|
Meet Coordinator
Join Date: Jan 2008
Location: brick/pt. pleasant beach
Posts: 19,341
|
Nitrous.
|
|
|
06-09-2013, 05:13 PM
|
#8
|
10 Second Club
Join Date: Feb 2008
Location: Eatontown
Posts: 1,647
|
Quote:
Originally Posted by Jersey Mike
I'm currently looking into a converter myself, but at $800+shipping+misc, it adds up pretty fast.
How much racing are you planning on doing?
|
A good converter lands you close to the same et/$ as nitrous with much less risk IMO.
converter ~$850 shipped
shift kit ~$100
trans cooler, lines, fittings ~$150
8 qts trans fluid ~$50
Total ~$1150 done right with new parts. I think you could drop .7 off your current times with a decent 3400 stall.
__________________
1999 C5 FRC: 12.7@114
2008 TBSS: 12.48@108
2017 Silverado 2500 do you even lift breh?
|
|
|
06-10-2013, 04:51 PM
|
#9
|
Join Date: May 2005
Location: under a roof
Posts: 2,034
|
I agree with fixing the rear first. After that I would put Drag Radials on it before the converter. Make sure you get it hooking and everything working right first. The right converter will definitely cut down on your e.t. but make sure you have everything else right first. I know they aren't cheap but if you get a custom one based on your application it will work much better. I used Ultimate Converter Concepts but they are pricey, a lot of racers tell me ATI is good and reasonable but I have never used them. Good luck with your car!
__________________
1973 Chevy Nova - best e.t.-10.04 - currently disassembled
1989 Pontiac Trans Am GTA
2016 Dodge Durango R/T
2015 Ram 3500 Dually Cummins
|
|
|
06-10-2013, 07:20 PM
|
#10
|
Join Date: Nov 2012
Location: Millstone, NJ
Posts: 641
|
Thing to think is are tou going to do any motor mods in the future. Like full bolt on, heads/cam etc. Becuse when you put a baby stall in it and then you do any mods ur most likely gonna have to change ur converter to have a bigger stall
__________________
94 TA GT. Stock 350, cam, exhaust
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
|
|