BCM Fix

[MyFirstZ]

Well a while ago i posted about my BCM intermittently going bad, shutting down my power windows and turning off my radio.

Well i took off the glove box so i can have access to it and mess with it. Well everytime it went down if i took the connectors and shook it, power returned again. Today i decided to take it out and look at the pins on both sides. While taking out i realized it is alot easier to open up then i thought, and i found this. . . .



A broken solder on a relay



I cleaned off the corrosion that built up on the broken solder and resoldered it and so far so good.

Any questions just ask.

[V]

awesome, good work. hopefully thats all it was and you saved yourself a few bucks.

i wonder if anyone else with a similar issue would try to open theirs and check that same location.

[BonzoHansen]

there is a big post over at ls1tech on that exact issue

[transmaro93]

where were you like 2 years ago when i replaced my bcm for the same problem... good fix though... just saved your self about $250

[MyFirstZ]

yeah i posted this over on ls1tech also because someone told me about this problem over there, so i thought i would throw up some pictures with results.

it was 205$ w/o tax at my shop rate. 300$ walk in

thanks 8]