4th Gen Rear - NJFBOA - Home of New Jersey's Camaros and Firebirds

ar0ck · 08-18-2004, 12:23 PM

Does anyone have any pictures of what it looks like in a 3rd gen with 3rd gen wheels? Im just curious of how far the wheels really stick out. Im begining to be afraid of that mexican beener look.

Also if I put my 3rd gen Drums onto the 4th gen rear, will I be able to still put 4th gen wheels on it?

Tru2Chevy · 08-18-2004, 01:02 PM

91DubZ28 has a 4th gen rear in his car....

Pics here: http://mywebpages.comcast.net/dubdesigns/camaro/

- Justin

NJSPEEDER · 08-18-2004, 04:54 PM

you drums won't go onto teh 4th gen rear unless you are into fabrication. the mounts for the drum set up and disc set ups are totally different.
what gears are you looking to do? if you want 3.42's there is an much easier way. go to the yard and find a V6 car, look for code GU6 on teh rpo sheet. that means 3.42 gears. then call up summit or watch teh classifieds and a posi unit for the appropriate axle spline count and for 3.23 or higher ratio.
add posi to 3.42 rear and you have a nice gain in grip and et for under 400bucks.

later
tim

90FormulaWS6 · 08-18-2004, 05:36 PM

yep what tim said... you can buy the take off SLP zexel-torsion from summit for 100 bucks... thats my next mod

deadtrend1 · 08-18-2004, 07:51 PM

I have them on my camaro. They stick out about 2 inches or so on both sides.

NJSPEEDER · 08-18-2004, 08:52 PM

Quote:

Originally Posted by 90FormulaWS6

yep what tim said... you can buy the take off SLP zexel-torsion from summit for 100 bucks... thats my next mod

you may wanna check to make sure they still have them. last i heard supplies were geetting low on the cheap take outs.

later
tim

formula4speed · 08-18-2004, 09:03 PM

pretty sure the take off units sold out a long while ago, i was gonna get one but ended up getting a 4th gen rear (sitting in my garage)

ar0ck · 08-19-2004, 12:26 AM

Those take off units are long gone...

I have a complete rear-end. Just no breaks. And Im not in the mood to hook up a disk set-up.

ar0ck · 08-19-2004, 12:31 AM

What do I need to convert the rear breaks to Disc? Can you list all the parts I would need, and where I could possibly get them for cheap.

89 Trans Am WS6 · 08-19-2004, 10:02 AM

rob a 4th gen.

thats how the honda kids do it.

and leave me the motor/trans.

jk :P