Today's Posts Mark Forums Read Calendar
Go Back   NJFBOA - Home of New Jersey's Camaros and Firebirds > Tech Forums > Electrical and Wiring

Notices


Reply
 
Thread Tools
Old 04-18-2018, 11:25 PM   #1
V
Stalker
 
V's Avatar
 
Join Date: Aug 2004
Posts: 12,078
iTrader: (12)
Troubleshooting Ford e-250 turn signal problem

For work, I drive a 2011 E-250 van. My boss just bought it about 3 weeks ago. It has around 150k miles and is overall in pretty good shape and runs/drives great.

However, from the first day we picked it up at the sellers lot, the turn signals have been acting up. Being used, there's no warranty so I'm trying to figure out the problem and fix it. First off, at no point did the turn signals ever cancel after completing a turn. I have to manually turn them off. The day we picked it up, the lever would not stay in the up(right directional) position. I had to hold it to keep it on. The seller took it around back to their garage and 5 minutes later, it was working again, and we went on our way. The next day, it wouldn't stay up again. Then the day after that, it worked again with nothing being fixed or messed with. Two days later, the lever wouldn't stay in the down (left) position, but would stay up fine. Next time driving it, lever would stay up and down normally. It's not a consistent failure. Sometimes it lasts a day, other times just a few blocks.

At first I though that maybe part of the cancelling cam had broken off and is loose inside the column or multi-function switch and is randomly getting stuck/jammed in the lever causing the signals not that stay up or down. After looking into that theory, turns out that Ford did away with cancelling cams in the mid-2000's so that can't be the issue. I then found out that the van has a "steering wheel position sensor" that may possibly have a function of cancelling and controlling the directional but I can't be sure since I've been unable to find any real information about it. The multi-function switch is 50-75 bucks and the position sensor is around 50. From just one post I managed to find online, a person with similar issues had changed the multi-function switch with no change but then changed the position sensor and that fixed it. I'm just hesitant to base a diagnosis on a single internet claim.

Any other ideas or suggestions? My boss will obviously pay me to fix the van but I just don't want to waste time and money on swapping out the wrong parts.
V is offline   Reply With Quote
Old 04-21-2018, 08:18 PM   #2
grazi
 
grazi's Avatar
 
Join Date: Mar 2011
Location: Morris County
Posts: 1,033
iTrader: (2)
I own a 2010 e350 and everything in my steering column is all jacked up with only 70,000 miles. The overdrive button is broke, the shift lever is loose and the ignition return spring is weak I have to turn back key every time I start it or the starter will stay engaged. Not sure If its all related but seems like some sort of design flaw to me.
__________________
94 Trans am 25th anniversary
86 Buick Regal T-type
73 camaro 454/T56 work in progress.
grazi is offline   Reply With Quote
Old 04-23-2018, 04:37 PM   #3
unstable bob gable
American Road Warrior
 
unstable bob gable's Avatar
 
Join Date: Jul 2005
Location: Wastelands of NJ
Posts: 6,116
iTrader: (2)
You should park it down by the river and live in it.
__________________
unstable bob gable: LEGENDARY LEGEND,
ICONIC ICON, AND AMERICAN BAD AZZ!!!

1991 Dodge Spirit R/T: Gran'pa lookin' 150+ mph turbo rocket.

2013 Dodge Avenger RT: Wastelands cruiser.

2008 Crown Vic Police Interceptor: 'Nuff said!

THE ONLY THING THAT SUCKS WORSE THEN IMPORTS ARE RICED OUT IMPORTS!!!
unstable bob gable is offline   Reply With Quote
Reply

  NJFBOA - Home of New Jersey's Camaros and Firebirds > Tech Forums > Electrical and Wiring


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

» Sponsor List














All times are GMT -5. The time now is 08:42 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.