![Reply](http://www.njfboa.org/forums/images/buttons/reply.gif) |
03-06-2007, 11:03 AM
|
#1
|
Join Date: Aug 2004
Location: Hillsborough, NJ
Posts: 3,200
|
Tech / Knowledge Center
After reading the thread about the home made seat rails, it reminded me of a conversation a while back about setting aside space to start collecting such knowledge.
Where in the "To Do" list is the section where we can start collecting all this stuff so that newbies like me can read through them? TGO has their list of things, broken up by functional area of the car. Good format, easy to peruse.
Any chance we can implement this then go through some history and start pulling out the gems?
__________________
I USED TO HAVE an 85 Camaro 305 4bbl, 90 Firebird V6, 97 Firebird V6 (10 speakers!). Despite the two family vehicles, 3 kids, wife and mortgage, I can finally realize the dream - 88 TA almost all stock... for now.
http://www.cardomain.com/id/untameddave
Wanted this - ![](http://www.njfboa.org/forums/images/smilies/se_smilie.gif) , but ended up with this - ![](http://www.njfboa.org/forums/images/smilies/tta.gif) for free. Can't argue with free.
|
|
|
03-06-2007, 11:05 AM
|
#2
|
Ayatollah of Rock N Rolla / Admin
Join Date: Mar 2006
Location: Parts Unknown
Posts: 12,573
|
Quote:
Originally Posted by Untamed
After reading the thread about the home made seat rails, it reminded me of a conversation a while back about setting aside space to start collecting such knowledge.
Where in the "To Do" list is the section where we can start collecting all this stuff so that newbies like me can read through them? TGO has their list of things, broken up by functional area of the car. Good format, easy to peruse.
Any chance we can implement this then go through some history and start pulling out the gems?
|
I think it's a good idea, but it would have to be cleaned for accuracy.
|
|
|
03-06-2007, 11:10 AM
|
#3
|
Join Date: Aug 2004
Location: Hillsborough, NJ
Posts: 3,200
|
I just read the club newsletter, which mentions the tech section.
I definately agree, much like a wiki, the tech articles should be "policed" in some way so that we aren't throwing up redneck hack jobs that'll get someone killed.
__________________
I USED TO HAVE an 85 Camaro 305 4bbl, 90 Firebird V6, 97 Firebird V6 (10 speakers!). Despite the two family vehicles, 3 kids, wife and mortgage, I can finally realize the dream - 88 TA almost all stock... for now.
http://www.cardomain.com/id/untameddave
Wanted this - ![](http://www.njfboa.org/forums/images/smilies/se_smilie.gif) , but ended up with this - ![](http://www.njfboa.org/forums/images/smilies/tta.gif) for free. Can't argue with free.
|
|
|
03-06-2007, 01:41 PM
|
#4
|
Co-Founder / Site Admin
Join Date: Jul 2004
Location: Ewing, NJ
Posts: 22,473
|
I was actually contemplating setting it up as a wiki.....we'll see though. We've been talking about doing something like this since day 1, so it'll be nice to finally get it up soon.
- Justin
__________________
1999 Camry - Beigemobile DD
2002 Suburban - Wife's DD
2004 Grand Cherokee - Not running / Project / Selling?
|
|
|
03-06-2007, 03:31 PM
|
#5
|
NJFBOA Co-Founder
Join Date: Jul 2004
Location: All up in your kool aid!
Posts: 12,235
|
one of the things that has delayed creating the tech center is that we are planning to be rather picky about how the articles are to be written. we don't want it to turn into the slapped together crap that a lot of sites offer.
we want honest, feature quality information. articles that include EVERY STEP, a complete tools required/helpful list(including specific wrench/rachet sizes) at the begining of the article, and most importantly, lots of pictures.
there has also been discussion about how to host the articles on the site as well as having printer/download friendly versions available to make easier reference when it is time to use your new found knowledge.
we are also working on a few things that will accelerate the process of having tech articales available. so stay tuned.
|
|
|
03-06-2007, 11:28 PM
|
#6
|
Join Date: Feb 2007
Location: hamilton nj / glassboro nj
Posts: 916
|
sounds like a good idea... i develop websites so if there is anything i can help with i would love to help out
|
|
|
03-10-2007, 04:12 PM
|
#7
|
NJFBOA Co-Founder
Join Date: Jul 2004
Location: All up in your kool aid!
Posts: 12,235
|
thanks man. when we get to the point of laying out our first few articles we will be in touch with some members for feedback. we are putting up pretty strict requirements for the format and content before we will host any technical or how to article. i am sure many of you are with me when i say that 80% or more of the tech information floating around the web is only half complete at best.
|
|
|
03-10-2007, 07:53 PM
|
#8
|
Ayatollah of Rock N Rolla / Admin
Join Date: Mar 2006
Location: Parts Unknown
Posts: 12,573
|
Quote:
Originally Posted by NJSPEEDER
thanks man. when we get to the point of laying out our first few articles we will be in touch with some members for feedback. we are putting up pretty strict requirements for the format and content before we will host any technical or how to article. i am sure many of you are with me when i say that 80% or more of the tech information floating around the web is only half complete at best.
|
80% is being charitable LOL.
|
|
|
03-11-2007, 10:10 AM
|
#9
|
.
Join Date: Feb 2006
Posts: 1,385
|
i am in a week re doing the cam and rockers on busters super comp motor -- we are installing a comp cams belt drive with tensioner and a jessel shaft rocker set up instead on the gold cranes with a stud girdle -- the valve spring pressure is way to high 660 open and the metal T chain harmonics is cracking off the rocker pedestals posts at the rocker has not done any damage yet but we know it will if left unattended -- it may be to over the top for most -- i am also with the belt - making this change - we do not have the wander the chain gives us ( changing the cam timing ) and at the track like for a pinks thing would be available to us -- so a comprehensive cam location change is in order - valve to piston - valve to valve - and how much both ways will be available to us is going to be sought after -- i built the entire combo so we know all of whats in it -- but i would need a volunteer it will BE to much info and time for me to do and photo and write than sort and make it all work as a story article = like a staff writer so to speak -- but again this sort of operation might be over the top and only but a few might ever benefit from it ???????? -- let me know if this is what you are look for in what ever a wiki is hahahahha different generation i guess -- i would be avail to do it and spend what ever extra time so as all could understand ------------ up too u guys ----- jz
|
|
|
03-11-2007, 01:55 PM
|
#10
|
NJFBOA Co-Founder
Join Date: Jul 2004
Location: All up in your kool aid!
Posts: 12,235
|
once we get started we will be looking for technical information and how to articles for all skill and knowledge levels. one of the goals of this will be to create a sort of "one stop shopping" for everyone from first timer through experienced builder.
it will take a long time to build up, but will be worth it.
|
|
|
03-15-2007, 06:20 PM
|
#11
|
The Plague
Join Date: Dec 2005
Location: Cherry Hill
Posts: 955
|
Sounds pretty cool....have you considered a page of places the site trusts/endorses. For example....if someone needed machining done where to go, or where to find parts for a "?" It might be easier than having posts in numerous forums.
__________________
www.cardomain.com/id/1972lt-1
My sanity wrote a suicide note.....one of us is illiterate and the other is blind.-OTEP
That is not dead which can eternal lie, and in stranger aeons even death may die-H.P.L.
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
|
|