Sounds like you may have a short, or wiring that's touching wiring. You'll need to check the wiring going to the switch, since you still have power when its off. Look for any wire that's touching another peices of wire, that is up against a peice of metal. Maybe a bad tape job, could be the culprit. You'll have to do some searching. I had my power window/lock/dome light circuit intermittently cutting out and blowing fuses. Turned out to be a conection came loose. I found it by tracing all the wires from each component on that circuit. Hope this helps. Good luck!
__________________
2002 N.H.R.A. Edition. M6 Full SLP exhaust, heads, cam, intake,maf, k&n filter, Bilstein shocks, Eibach springs, to much to list
1999 Z28 A4 upgraded brakes, cat back, computrr tune, Vette wheels. Bunch of little stuff
1994. Z28 A4 Full exhaust including SLP Long tubes, 3" ORY pipe, 3 in cat back, CAI, chip, maf,BMR A Arms, Panhard rod, torque arm,. Bilstein shocks, Eibach springs, transmission more, including street shift kit.
|