|
12-20-2014, 08:53 PM
|
#1
|
Stalker
Join Date: Aug 2004
Posts: 12,078
|
wheel bearing bad, which side?
I'm trying to diagnose a bad wheel bearing on my mothers Dodge Caravan.
It's definitely a speed related growling noise coming from the front end.
When driving and I turn to the RIGHT, the noise basically goes away.
When driving straight, or turning to the left, no change in the noise really.
Which side bearing is bad?
I want to say its the driver side based on the noise while driving in general, but I haven't been in the car as a passenger to listen to the noise coming maybe from that side actually. Years in the military attached to a feild artillery battalion has taken its toll on my hearing so I know I could be off on my perception as to where a noise is directly coming from.
Next step I guess will be to jack up each side and "shake"/move the wheel at 12 and 6 to check for play. But I was hoping someone could recommend based on the turning symptoms. I've checked online and Ive read people saying completely different things. I gave up looking.
Last edited by V; 12-20-2014 at 08:54 PM.
|
|
|
12-20-2014, 10:19 PM
|
#2
|
Join Date: Nov 2012
Location: Millstone, NJ
Posts: 641
|
driver, when you turn right weight is going off the driver bearing and more onto the passenger side. why it doesnt go away when you turn left
__________________
94 TA GT. Stock 350, cam, exhaust
|
|
|
12-20-2014, 11:09 PM
|
#3
|
Stalker
Join Date: Aug 2004
Posts: 12,078
|
Quote:
Originally Posted by Dudbird113
driver, when you turn right weight is going off the driver bearing and more onto the passenger side. why it doesnt go away when you turn left
|
when you turn right, isn't weight transferred to the outside of the turn? putting more load on the driver side? same basically as the body rolling away from the turn?
|
|
|
12-20-2014, 11:36 PM
|
#4
|
Lord of the rings / 10 Second Club / Meet Coordinator
Join Date: Aug 2004
Location: Millstone Township, NJ
Posts: 6,361
|
Passenger. Turn to the right takes weight off passenger wheel.
__________________
97 T/A Ram Air Convt
Forever dyno queen / 777rwhp 662 rwtq @ 17lbs / 10.2 @ 140
'24 Corvette Z06
17 Sierra 2500HD Dmax
81 Turbo TA
|
|
|
12-21-2014, 01:07 AM
|
#5
|
12 Second Club
Join Date: Aug 2004
Location: Oradell
Posts: 8,369
|
blackbird is correct
__________________
88 Camaro
95 Impala SS
97 Trans Am WS6
98 Blazer ZR2
00 Corvette
04 CTS-V
04 Grand Cherokee
07 Sublime Charger Daytona
09 Grand Cherokee Limited HEMI
12 Tahoe LT
17 Malibu LT
|
|
|
12-21-2014, 07:52 AM
|
#6
|
Join Date: Jan 2010
Location: Millstone twp
Posts: 541
|
Does it matter? You want to replace the bearings on both sides at the same time, right?
|
|
|
12-21-2014, 08:20 AM
|
#7
|
Meet Coordinator
Join Date: Jan 2008
Location: brick/pt. pleasant beach
Posts: 19,342
|
Eh, I've never done wheel bearings in pairs. The other can last quite some time or could have been replaced before. I agree with Brian.
|
|
|
12-21-2014, 08:37 AM
|
#8
|
Stalker
Join Date: Aug 2004
Posts: 12,078
|
im only fixing parts as needed. the van is starting to have major rust on the rockers. even with only 115k miles or so, its time is almost up. She drives local, maybe 100 miles a month with no highway driving. Im just trying to have it last through the winter and my mom will get a new car in the spring or summer.
|
|
|
12-22-2014, 05:43 PM
|
#9
|
Admin.
Join Date: Aug 2005
Location: Hamilton, NJ
Posts: 20,153
|
I bet the bad one will have some play, although not always. Pull the wheels and check
__________________
Vent Windows Forever!
The looser the waistband, the deeper the quicksand. Or so I have read.
Feather-light suspension, Konis just couldn't hold. I'm so glad I took a look inside your showroom doors.
Hey everybody, it's good to have you on the Baba-too-da-ba-too-ba-ba-buh-doo-ga-ga-bop-a-dop
|
|
|
12-23-2014, 07:59 AM
|
#10
|
Meet Coordinator
Join Date: Jan 2008
Location: brick/pt. pleasant beach
Posts: 19,342
|
Or you can spin it and carefully listen for horrid noises
|
|
|
12-29-2014, 04:26 PM
|
#11
|
Stalker
Join Date: Aug 2004
Posts: 12,078
|
jacked each one up at a time and spun... no horrid sounds. no questionable sounds either, just slight rubbing of brake pads. no noise difference between front wheels either. both spun same amount with trans in neutral.(fwd). Even checked rear wheels. no noises there. now what? go with just changing passenger side and keep my fingers crossed?
|
|
|
12-29-2014, 04:35 PM
|
#12
|
Join Date: Sep 2008
Location: Hackettstown, NJ
Posts: 1,650
|
Did you try putting a pry bar under the tire while jacked up and checking for play?
__________________
1998 Z-28 - SLP lid - Ported TB - LS6 Intake - Dynatech SS headers/Catted Y - Magnaflow Exh - 3.42 - Yank SS3600 - UMI weld-in subframe connectors, Adj LCA, Adj PHB, Q1A TA - Bolt-in Relocation Brackets - Strano springs - Koni shocks - 17" C6Z06 wheels - 326HP/335ft-lbs - 12.35 @ 110.41
Quote:
Originally Posted by Blackbirdws6
I can appreciate a dream but this person needed some real friends.
|
|
|
|
12-29-2014, 07:01 PM
|
#13
|
Stalker
Join Date: Aug 2004
Posts: 12,078
|
Quote:
Originally Posted by The_Bishop
Did you try putting a pry bar under the tire while jacked up and checking for play?
|
no, I just grabbed at 12 and 6 and shook it looking for any play.
I guess I'll try that next time.
I may just go and replace the passenger side based on the turning symptoms. If I'm wrong, then I'll change the driver side too. Or have my mom trade it in as-is.
|
|
|
12-29-2014, 07:48 PM
|
#14
|
Meet Coordinator
Join Date: Jan 2008
Location: brick/pt. pleasant beach
Posts: 19,342
|
Sometimes they won't show play especially if the noise is at a higher speed. Run your hand across the tread for obvious cupping etc too.
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
|
|