 |
|
04-21-2016, 09:33 PM
|
#1
|
Join Date: Feb 2016
Posts: 692
|
anyone feel like its easier to drag race with a stock manual shifter?
I ran the whole 1st season with my f-body with the stock factory shifter. Winter time I put in a pro 5.0 short throw with a ws6 short stick. I feel like this shifter is hard to really bang gears fast and in turn is hurting my 1/4 time....This season I am not doing as well as last season despite better 60' times
I am using as much effort as possible to shift when I shift yet I just feel like it is overly notchy.
|
|
|
|
04-21-2016, 10:28 PM
|
#2
|
Join Date: Dec 2009
Location: milltown
Posts: 1,497
|
That's a product of the pro 5.0. Could never shift my that fast. I highly recommend the mgw over the pro 5.0
__________________
2002 Camaro Sunset Orange Mettalic, V6, 5spd, bilstein HD shocks and struts, eibach pro lowering kit, eibach f/r sway bars, lakewood PHB, UMI 2 point subframe connectors, energy suspensions poly master bushing kit
daily econobox and first car
1986 IROC-Z, T56, MGW shifter, Heads, Cam, Holley Stealth Ram 350, t-top, tubular LCA with relo brackets, adjustable PHB, belltech sway bars, ground control weight jacks, SLP mid length headers, 3in w/borla XR1, RIP 3 10 bolts, 12.7 @ 109 so far.. atleast its faster than stock  SOLD
1971 Camaro LS3/T56/9in, cam only and still carbed, RIP 2 10 bolts, 11.62@121
03 Blazer 2 door - salt sponge
|
|
|
|
|
04-22-2016, 08:11 AM
|
#3
|
|
Lord of the rings / 10 Second Club / Meet Coordinator
Join Date: Aug 2004
Location: Millstone Township, NJ
Posts: 6,361
|
Stock shifter required minimal effort but the throws are just too long IMO. I swapped the stock shifter to a Hurst+ and then later added a Lou's short stick. The Hurst provided shorter throws with added feel. I do not have any experience with a Pro 5.0 or B&M in a fbody. I have played with a B&M, Hurst and MGW in a C5 though but it won't be the same. All shifters, except stock, seemed "stiff" in the C5 application so I guess this may carry over into the other 4th gen offerings.
I was reading a lot about the recently introduced Hinson shifter. I was hesitant to buy it without being able to mess with it beforehand but there seemed to be a good buzz about it. During the holidays they ran a sale which extended to Amazon. I got it for a heavy discount (holiday price + discover 5% cashback, free prime shipping, no tax).
I dropped the shifter into the car this week and initial impressions are very positive. The shift effort is very light with a very direct, short throw and positive feel. I honestly can't see how you can miss the 2-3 with this thing (I may find a way  ). The shift lever is vertical so placement of the shift knob is a touch over to the right side of the car. They made a version with the shift handle moved about an inch towards the driver but I am going to give this a try as is. It was designed this way so it makes sense to play with it before trying something different. If I decide to move it over, the Lou's short stick should bolt right on and angle the shift knob towards me. Alternatively I could just add a spacer to the existing stalk. Either may mess with the intended geometry and function of the unit so again, I am going to drive it as is for a bit.
__________________
97 T/A Ram Air Convt
Forever dyno queen / 777rwhp 662 rwtq @ 17lbs / 10.2 @ 140
'24 Corvette Z06
17 Sierra 2500HD Dmax
81 Turbo TA
|
|
|
|
|
04-22-2016, 08:58 AM
|
#4
|
Join Date: Feb 2016
Posts: 692
|
At least its not me ! lol I even watched the gopro video of me racing and I just feel like the shifts are taking forever because of that extra resistance
I am tight on cash right now so I think I will swap back to stock and see how I run
last season i had a 1.74 60' and ran a 12.1 now I had a 1.70 60' and ran a 12.5 so I attribute that time difference to the shifter because as I mentioned I feel like I am taking forever to shift.
|
|
|
|
|
04-22-2016, 10:30 AM
|
#5
|
|
Meet Coordinator
Join Date: Jan 2008
Location: brick/pt. pleasant beach
Posts: 19,341
|
Did you compare da's? What was the mph?
|
|
|
|
|
04-22-2016, 11:12 AM
|
#6
|
Join Date: Feb 2016
Posts: 692
|
Quote:
Originally Posted by sweetbmxrider
Did you compare da's? What was the mph?
|
DA was similar... my mph was down from 113 to 110 but i think it is because I had more time between shifts
|
|
|
|
|
04-22-2016, 12:24 PM
|
#7
|
|
Lord of the rings / 10 Second Club / Meet Coordinator
Join Date: Aug 2004
Location: Millstone Township, NJ
Posts: 6,361
|
If you have the ability to datalog, it would be interesting to see the difference in both shifters.
__________________
97 T/A Ram Air Convt
Forever dyno queen / 777rwhp 662 rwtq @ 17lbs / 10.2 @ 140
'24 Corvette Z06
17 Sierra 2500HD Dmax
81 Turbo TA
|
|
|
|
|
04-22-2016, 01:30 PM
|
#8
|
Join Date: Feb 2016
Posts: 692
|
Quote:
Originally Posted by Blackbirdws6
If you have the ability to datalog, it would be interesting to see the difference in both shifters.
|
cant datalog. well prob could because its tuned with hp tuners but would have to take the tuners laptop lol so not getting all involved in that...the difference will be in the slips...
not sure if i will try one more week with this shifter because I have another tire setup i wanna try as well...
|
|
|
|
|
04-22-2016, 02:52 PM
|
#9
|
|
Lord of the rings / 10 Second Club / Meet Coordinator
Join Date: Aug 2004
Location: Millstone Township, NJ
Posts: 6,361
|
Quote:
Originally Posted by 6spdg37s
cant datalog. well prob could because its tuned with hp tuners but would have to take the tuners laptop lol so not getting all involved in that...the difference will be in the slips...
not sure if i will try one more week with this shifter because I have another tire setup i wanna try as well...
|
I think you will find more variability using the 1/4 mile to confirm if the shifter is slowing you down. There are just too many variables (DA, 60', everthing else). Anyone with HP Tuners and an interface should be able to datalog.
__________________
97 T/A Ram Air Convt
Forever dyno queen / 777rwhp 662 rwtq @ 17lbs / 10.2 @ 140
'24 Corvette Z06
17 Sierra 2500HD Dmax
81 Turbo TA
|
|
|
|
|
04-22-2016, 03:11 PM
|
#10
|
Join Date: Feb 2016
Posts: 692
|
Quote:
Originally Posted by Blackbirdws6
I think you will find more variability using the 1/4 mile to confirm if the shifter is slowing you down. There are just too many variables (DA, 60', everthing else). Anyone with HP Tuners and an interface should be able to datalog.
|
this is true... I also watched the video from my go pro that was in the car and i noticed i was lifting off the gas when shifting.. not sure why because I never do that...
is there any pre-load adjustments on the pro 5.0 shifter? it also only has about 400 miles on it maybe 500 so it def isn't broken in 100% yet
|
|
|
|
|
04-22-2016, 03:24 PM
|
#11
|
|
Lord of the rings / 10 Second Club / Meet Coordinator
Join Date: Aug 2004
Location: Millstone Township, NJ
Posts: 6,361
|
Quote:
Originally Posted by 6spdg37s
this is true... I also watched the video from my go pro that was in the car and i noticed i was lifting off the gas when shifting.. not sure why because I never do that...
is there any pre-load adjustments on the pro 5.0 shifter? it also only has about 400 miles on it maybe 500 so it def isn't broken in 100% yet
|
Others can comment regarding the pro 5.0 adjustments but regarding the mileage break in, I would spend more time with it before taking it out.
__________________
97 T/A Ram Air Convt
Forever dyno queen / 777rwhp 662 rwtq @ 17lbs / 10.2 @ 140
'24 Corvette Z06
17 Sierra 2500HD Dmax
81 Turbo TA
|
|
|
|
|
04-23-2016, 10:10 AM
|
#12
|
Join Date: Aug 2007
Location: Piscataway, N.J.
Posts: 1,729
|
Maybe I'am DATING myself (who else would go out with me  ), but do you guys still POWER SHIFT or lift between shifts? I did it with a few manual GTO's I had, but was always scared S**TLESS if I missed a gear and over reved it.
__________________
1991 FORMULA 350-GONE BUT NOT FORGOTTEN
1 of 1,197 with L98 Option/13.79@100 mph
1994 25th ANNIVERSARY TRANS AM GT -1 of ONLY 2,000 made/ Only 128 made with a HURST 6-Speed Manual and 91 with T-Tops and Compact Disc/ K & N Filtercharger/Magnaflow Performance Muffler/Air Foil- ORIGINAL MINT Arctic White Ultra Rare SURVIVOR. DAYTONA 500 PACE CAR Decal Kit!
SOLD: 1989 Turbo T/A in 1991 it ran 12:18@115 mph
Last edited by edpontiac91; 04-23-2016 at 10:10 AM.
|
|
|
|
|
04-23-2016, 03:53 PM
|
#13
|
|
Lord of the rings / 10 Second Club / Meet Coordinator
Join Date: Aug 2004
Location: Millstone Township, NJ
Posts: 6,361
|
I don't powershift the bird anymore but have in the distant past.
__________________
97 T/A Ram Air Convt
Forever dyno queen / 777rwhp 662 rwtq @ 17lbs / 10.2 @ 140
'24 Corvette Z06
17 Sierra 2500HD Dmax
81 Turbo TA
|
|
|
|
|
04-28-2016, 07:58 AM
|
#14
|
|
Admin.
Join Date: Aug 2005
Location: Hamilton, NJ
Posts: 20,152
|
Quote:
Originally Posted by 6spdg37s
is there any pre-load adjustments on the pro 5.0 shifter? it also only has about 400 miles on it maybe 500 so it def isn't broken in 100% yet
|
No.
__________________
Vent Windows Forever!
The looser the waistband, the deeper the quicksand. Or so I have read.
Feather-light suspension, Konis just couldn't hold. I'm so glad I took a look inside your showroom doors.
Hey everybody, it's good to have you on the Baba-too-da-ba-too-ba-ba-buh-doo-ga-ga-bop-a-dop
|
|
|
|
|
04-28-2016, 08:44 AM
|
#15
|
Join Date: Feb 2016
Posts: 692
|
after doing more diagnosing I think the issue is actually that the clutch is not completely disengaging and under normal driving it is okay but at full throttle attempting to power shift it is having the issue. Been in touch with clutch manufacturer and it looks like although the measurements were within spec to not use the shim , it appears I will have to install the shim to remedy the situation.
|
|
|
|
|
05-03-2016, 09:51 PM
|
#16
|
|
^^^Lover of bad cars^^^ Meet Coordinator
Join Date: Aug 2007
Location: Whitehouse Station
Posts: 2,260
|
Quote:
Originally Posted by 6spdg37s
after doing more diagnosing I think the issue is actually that the clutch is not completely disengaging and under normal driving it is okay but at full throttle attempting to power shift it is having the issue. Been in touch with clutch manufacturer and it looks like although the measurements were within spec to not use the shim , it appears I will have to install the shim to remedy the situation.
|
Oh wait.... Déjà vu here. Didn't we say not to go with spec? 
__________________
1986 Honda VFR750 - 89.3HP to the wheel
2000 Trans Am M6 - Mods: Yes.
2018 Durango R/T - AFE Intake, JLT Catch Can, Stainless Works Catback, Vinyl Dodge Racing Stripes
2003 Toyota Matrix XRS M6 - Lol
|
|
|
|
|
05-04-2016, 06:14 PM
|
#17
|
Join Date: Feb 2016
Posts: 692
|
Quote:
Originally Posted by ThoR294
Oh wait.... Déjà vu here. Didn't we say not to go with spec? |
just need to put the shim in
|
|
|
|
|
05-14-2016, 11:16 PM
|
#18
|
Join Date: Feb 2016
Posts: 692
|
decided to order the tick master cylinder, I think all problems will be cleared up with this.
|
|
|
|
|
05-15-2016, 06:19 AM
|
#19
|
|
Stalker
Join Date: Aug 2004
Posts: 12,077
|
What happened with the shim?
|
|
|
|
|
05-15-2016, 08:51 AM
|
#20
|
Join Date: Feb 2016
Posts: 692
|
Quote:
Originally Posted by V
What happened with the shim?
|
I put the shim in but even with the shim at 6500 banging gears it gets locked out, so its also a hydrolic flow problem.
I heard that sometimes with firm/agressive stage clutches the factory master can't provide enough fluid to it/pressure to allow the TOB to disengage the clutch fully...
|
|
|
|
|
05-16-2016, 09:22 AM
|
#21
|
|
^^^Lover of bad cars^^^ Meet Coordinator
Join Date: Aug 2007
Location: Whitehouse Station
Posts: 2,260
|
You have an LS car right? If that's the case then yeah I've seen stock hydraulics be bad (common fix is drill mod or tick upgrade)
__________________
1986 Honda VFR750 - 89.3HP to the wheel
2000 Trans Am M6 - Mods: Yes.
2018 Durango R/T - AFE Intake, JLT Catch Can, Stainless Works Catback, Vinyl Dodge Racing Stripes
2003 Toyota Matrix XRS M6 - Lol
|
|
|
|
|
05-16-2016, 09:58 AM
|
#22
|
|
Stalker
Join Date: Aug 2004
Posts: 12,077
|
I had high rpm issue with spec. Switched to textrailia and never had the issue again. Shifted at 6900-7200. Still had stock hydraulics
|
|
|
|
|
05-16-2016, 03:16 PM
|
#23
|
|
11 Second Club
Join Date: Feb 2008
Location: Edison, NJ
Posts: 4,619
|
Pro 5.0 is fine... I love mine and I'm not a real good stick driver.
__________________
1999 Z28 Convertible. 6 speed swap, wide cowl hood, full hockey stripes, and a whining 10 bolt.
2008 Sierra Vortec Max. 6.2 swapped, headers, Magnaflow catback, GMPP CAI, NHT optioned tow package.
2006 GTO, 11.48 @ 118.3
|
|
|
|
|
05-16-2016, 05:48 PM
|
#24
|
Join Date: Feb 2016
Posts: 692
|
Quote:
Originally Posted by ThoR294
You have an LS car right? If that's the case then yeah I've seen stock hydraulics be bad (common fix is drill mod or tick upgrade)
|
yup LS car
supposidly, stage 3 and higher clutches require a lot of force from the TOB to disengage completely due to their stiffness
Last edited by 6spdg37s; 05-16-2016 at 05:52 PM.
|
|
|
|
|
05-20-2016, 06:53 PM
|
#25
|
Join Date: Feb 2016
Posts: 692
|
installed tick master today and everything is good !
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
|
|
