|
07-25-2007, 08:19 AM
|
#1
|
Join Date: May 2007
Posts: 55
|
Mod Advice
I'm about to come into some extra cashdue to a re-enlistment bonus for the service. I've already got permission from my wife to spend a little bit of cash on my car. I'm thinkon buying a whisper lid. I have a RAM Air stock but I've heard that a whisper is better and I'd get a little more HP out of it. Can anyone point me in the right direction to but one? Also I'm thinking on buying smooth bellows for my car. Is this a waste of money? Then last I was planning on taking it to egt a custom tune. Anyone have any suggestions in South Jersey? Only place I know of is the SLP shop in Toms River.
OR how would you people spend $500 in mods?
Thanks in advance
__________________
2000 WS6 Trans AM
1992 Firebird v8 (SOLD)
1990 Firebird v6 (SOLD)
|
|
|
07-25-2007, 12:14 PM
|
#2
|
Join Date: Dec 2005
Location: Boston/North
Posts: 9,214
|
i was just thinking about this but i've decided to put my money towards a new laptop.. i could use it
__________________
Quote:
Originally Posted by BonzoHansen
dumbass.
|
|
|
|
07-25-2007, 06:23 PM
|
#3
|
Banned Camp Director Emeritus
Join Date: Aug 2004
Location: Somerset County
Posts: 8,395
|
I'm poretty sure a lid is only $100, so you'd have $400 left to play with. from what I've heard, the TSP, whisper, and SLP lids are the better ones.
__________________
Quote:
Originally Posted by baddest434
and 1 more smart ass answer by you and i'm going to reach into this monitor and grab you by the throat
|
|
|
|
07-25-2007, 08:04 PM
|
#4
|
Join Date: Aug 2004
Location: Somerset County
Posts: 5,559
|
a lid is a lid is a lid is a lid...and they never go bad so you may want to try and snag a used one. I think you can do a smooth bellows for a couple bucks using stuff from home depot. Other than that a tune would be good, maybe try a mail-order one since noone does good tuning around here anymore.
__________________
1999 Corvette FRC
|
|
|
07-25-2007, 10:02 PM
|
#5
|
Join Date: May 2007
Posts: 55
|
What about the SLP place tho? Anyone have comments on them?
__________________
2000 WS6 Trans AM
1992 Firebird v8 (SOLD)
1990 Firebird v6 (SOLD)
|
|
|
07-25-2007, 11:53 PM
|
#6
|
Join Date: Aug 2004
Location: Somerset County
Posts: 5,559
|
Quote:
Originally Posted by jamessr
What about the SLP place tho? Anyone have comments on them?
|
i wouldn't go there if it were my car
__________________
1999 Corvette FRC
|
|
|
07-26-2007, 10:05 AM
|
#7
|
BadMod
Join Date: Aug 2004
Location: hamilton, nj
Posts: 8,889
|
ians right, a lid is a lid....one correction to his statement is that tsp dosent make their lids anymore......i wouldnt touch the home depot (fernco) bellows with a 10foot pole, they are hard to install, tend to crack lids, and offer negligable gains.....
if the car is stock and your just doing the lid, i wouldnt spend my money on a tune yet, i would wait untill there was a few more things done so the tuner had somthing more to work with.....
100 on the lid, if the cars a m6 i would spend 150ish on a b&m or pro5.0 shifter
then put the rest of it away for a while
__________________
So much stupid, so little time.
Quote:
Originally Posted by 79CamaroDiva
It started before I drove your car. I just have to look at it the wrong way and your car poops parts.
|
Mercerville MotorSports, LLC
Last edited by Mike; 07-26-2007 at 10:07 AM.
|
|
|
07-26-2007, 12:08 PM
|
#8
|
Admin.
Join Date: Aug 2005
Location: Hamilton, NJ
Posts: 20,152
|
I don't see a mod list, so this might be a moot point. Did you do an exhaust yet?
__________________
Vent Windows Forever!
The looser the waistband, the deeper the quicksand. Or so I have read.
Feather-light suspension, Konis just couldn't hold. I'm so glad I took a look inside your showroom doors.
Hey everybody, it's good to have you on the Baba-too-da-ba-too-ba-ba-buh-doo-ga-ga-bop-a-dop
|
|
|
07-26-2007, 02:20 PM
|
#9
|
Join Date: May 2007
Posts: 55
|
Pretty much all I have is
Borla Exhuast
Stock RAM Air
Thats kinda why I'm askign some advice on some MODS
__________________
2000 WS6 Trans AM
1992 Firebird v8 (SOLD)
1990 Firebird v6 (SOLD)
|
|
|
07-26-2007, 03:43 PM
|
#10
|
Mr Fantastic
Join Date: Aug 2004
Location: West Milford NJ
Posts: 7,917
|
lid, shifter like cbrmike said....pro-5.0 ftw. subframe connectors if you dont mind the stock shifter
__________________
Matt
B18B1 FTW
|
|
|
07-26-2007, 05:10 PM
|
#11
|
Join Date: May 2007
Posts: 55
|
I just looked up that shifter, thats pretty nice. I've never considered it at all!. Well thats 1 mod I'll make for sure. Doesn't look very hard to change out either.
I think my biggest question was a lid.
And I know "a lid is a lid is a lid is a lid"
But Is a lid better than my stock RAM air lid? Or is my Stock RAM air lid a lid.
I'm confused when it comes to that.
__________________
2000 WS6 Trans AM
1992 Firebird v8 (SOLD)
1990 Firebird v6 (SOLD)
|
|
|
07-26-2007, 07:04 PM
|
#12
|
Join Date: Aug 2004
Location: Somerset County
Posts: 5,559
|
Quote:
Originally Posted by jamessr
I just looked up that shifter, thats pretty nice. I've never considered it at all!. Well thats 1 mod I'll make for sure. Doesn't look very hard to change out either.
I think my biggest question was a lid.
And I know "a lid is a lid is a lid is a lid"
But Is a lid better than my stock RAM air lid? Or is my Stock RAM air lid a lid.
I'm confused when it comes to that.
|
if your stock lid has air baffles on it then yes go aftermarket. as for the shifter install it is cake...just pull out the center console, unbolt the stock shifter(4 bolts) replace with the new shifter(using black rtv) and reinstall the center console
__________________
1999 Corvette FRC
|
|
|
07-31-2007, 07:34 PM
|
#13
|
Join Date: Jun 2007
Location: Wahington Township
Posts: 113
|
id say lid and mid pipe if i were you .. jus my $0.02
__________________
RIP
2001 Camaro Z28
SLP Loudmouth 1 Series Catback
Sick Paint Job; Drilled/slotted rotors; Painted Calipers
Black TTM 2 17x9.5 2 17x10.5;2 275,40,17 ;2 315,35,17
Future Mods: SLP Cold Air Intake, Small shot of nitrous, headers, catted y, Stereo System(debatable)
|
|
|
07-31-2007, 07:37 PM
|
#14
|
Join Date: Jun 2007
Location: Wahington Township
Posts: 113
|
__________________
RIP
2001 Camaro Z28
SLP Loudmouth 1 Series Catback
Sick Paint Job; Drilled/slotted rotors; Painted Calipers
Black TTM 2 17x9.5 2 17x10.5;2 275,40,17 ;2 315,35,17
Future Mods: SLP Cold Air Intake, Small shot of nitrous, headers, catted y, Stereo System(debatable)
|
|
|
08-01-2007, 11:12 AM
|
#15
|
Ayatollah of Rock N Rolla / Admin
Join Date: Mar 2006
Location: Parts Unknown
Posts: 12,573
|
I would do the shifter first. It will make the car much more enjoyable to drive.
Regarding lids, they are all pretty much the same aside from material. Some of the 'harder' plastics can crack.
|
|
|
08-01-2007, 08:08 PM
|
#16
|
Hippy Mod, Bergermeister Meisterberger, Moderator
Join Date: Aug 2004
Location: Ewing
Posts: 6,213
|
Get a used lid for $50, then look into a ported throttle body for $50-70 with exchange of your TB. Other than the shifter, you might as well save up the rest for some more serious mods. Is the car your daily driver?
__________________
69 Z28 JL8 4 wheel disc brakes - being restored
09 Silverado Z71
|
|
|
08-11-2007, 08:34 AM
|
#17
|
11 Second Club
Join Date: Jan 2005
Location: Fishkill, NY
Posts: 1,278
|
I've had whisper and SLP lids, the SLP lid fits the best that I have seen. I agree with the pro 5.0, awesome shifter
__________________
-Nick
9/11/01- Never Forget
2002 Pontiac Trans-Am WS6 # 206
Chasing 10's
469RWH/437RWTQ
11.05 @ 123
|
|
|
08-15-2007, 09:00 PM
|
#19
|
Co-Founder / Site Admin
Join Date: Jul 2004
Location: Ewing, NJ
Posts: 22,473
|
No handheld tuners.....most of them are garbage.
Buy HPTuners and do it yourself - the software is easy to use, and there are tons of help files that come with it. Their forum is also a great resource.
- Justin
__________________
1999 Camry - Beigemobile DD
2002 Suburban - Wife's DD
2004 Grand Cherokee - Not running / Project / Selling?
|
|
|
08-16-2007, 09:03 AM
|
#20
|
11 Second Club
Join Date: Feb 2007
Location: elmer
Posts: 274
|
ive got an extra lid i think its a texas speed or something its new 40 bucks !!! salem co.
__________________
87 TURBO T-- 02 Z28
|
|
|
08-17-2007, 10:28 PM
|
#21
|
Join Date: May 2007
Posts: 55
|
I'm sending back the smooth bellow. I tried for over an hour fitting that thing and the lid just wouldn't sit right. So finally I put on the stock bellow and the lid fits fine.
Anyway Anyone else has any suggestions? I still have about $330 to spend.
__________________
2000 WS6 Trans AM
1992 Firebird v8 (SOLD)
1990 Firebird v6 (SOLD)
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
|
|