 |
|
03-08-2012, 09:42 PM
|
#1
|
Join Date: May 2010
Location: Brick, NJ
Posts: 1,868
|
(Build thread) My plans for a 3rd gen f-body that makes no sense
Ok this is thinking a little bit out of the box considering how most people either go carburated or TPI. But to make a more budget friendly build overall I have settled on a TBI build thats a little.....well different
I want something that will be reliable, fun to drive, run on pump gas and run well.
Here are my plans as itemized.
PLAN (revised)
334 TBI using the factory rebuildable engine
Have 081 heads I have cleaned and opened up a little as well as port matching
Headers and Y-pipe
Custom Dual exhaust using SLP LM1 style resonators (this is subject to change)
Performance lower manifold with EGR provision
Holley Throttle Body/have factory TBI unit rebult/ported
bigger injectors
LT4 hot cam or equal
LCA's
Panhard rod
Panhard rod relocation (this is if I decide to run true dual exhaust)
Torque arm
Wander bar
Sub frame connectors
Eibach Springs
Struts and shocks
Disc rear, 3.42 gear or 3.23
Custom made factory appearing "RS 327" decals
__________________
Formerly known as blk95formula
86t/a_ram_air on TGO
2018 Silverado 1500
Last edited by greenformula92; 03-19-2012 at 12:20 PM.
Reason: Revised plan
|
|
|
|
03-09-2012, 09:29 AM
|
#2
|
Join Date: Apr 2009
Location: Andover, NJ
Posts: 777
|
Most that that doesn't seem to be completely crazy. I know another guy on a different forum who is building an old 327 out of a chevelle or vette, to put in his 82. Hes almost done and probably getting ready to install it. But still you're right, why would someone do such a thing? lol.
I don't know if the thread is still on here, but I had the absolutely insane idea of doing another car like the Pegasus show car that was done in the 70s. An updated version of it. That was a 70 Firebird with a Ferrari drivetrain. I was thinking of taking a third gen bird (a 89 or so TA or GTA variant) getting a Ferrari 550 or 575 driveline, stuff it in there. It does have precedent as GM did it in the 70s, but will it happen, I highly doubt it. If you look around on thirdgen.org, there are people doing Viper engine swaps.......
Last edited by L695speed; 03-09-2012 at 09:30 AM.
|
|
|
|
|
03-09-2012, 10:19 AM
|
#3
|
|
Ayatollah of Rock N Rolla / Admin
Join Date: Mar 2006
Location: Parts Unknown
Posts: 12,573
|
Buy 88-WS6's car. Just needs an engine rebuild.
|
|
|
|
|
03-09-2012, 10:19 AM
|
#4
|
Join Date: Jun 2007
Location: Arm pit of the world... NJ
Posts: 2,677
|
Quote:
Originally Posted by greenformula92
327 TBI using the factory rebuildable engine
|
What factory rebuildable engine? An old 327?
__________________
John
Last edited by Featherburner; 03-09-2012 at 03:00 PM.
|
|
|
|
|
03-09-2012, 02:12 PM
|
#5
|
|
11 second club / Moderator
Join Date: Aug 2004
Location: West Berlin, NJ
Posts: 7,148
|
I dunno how much the swirl port heads will flow after work has been done to them. I would look aftermarket at least
__________________
2001 Trans Am WS6 •SLP Loudmouth II •UMI Suspension •12.857 @ 109.57
1996 Trans Am WS6 •Pacesetter Longtubes •Strange 12 Bolt •Spohn Suspension •11.152 @ 123.85
|
|
|
|
|
03-10-2012, 12:08 AM
|
#6
|
Join Date: Feb 2010
Location: Stillwater
Posts: 822
|
Swirl Ports and 327 = fail.
The only thing a 327 would be good for is building a screamer... the swirl ports will surely ruin that.
__________________
Quote:
Originally Posted by LTb1ow
...its cool to like diesels, cause that and pretending to be country is like, hip nowadays!!
|
|
|
|
|
|
03-10-2012, 04:39 PM
|
#7
|
Join Date: May 2010
Location: Brick, NJ
Posts: 1,868
|
Well I kinda fubared this anyway because I can't bore a 305 block to 4 inches. so i wouldn't be able to make a real 327. Eagle makes a 334 rotating assembly using a .030 over piston. Oh and I just remembered I do have a set of LB9 081 heads laying around so I can use them instead of the swirl ports.
Featherburner, I plan to use the factory 305 block
__________________
Formerly known as blk95formula
86t/a_ram_air on TGO
2018 Silverado 1500
Last edited by greenformula92; 03-10-2012 at 05:02 PM.
|
|
|
|
|
03-10-2012, 09:33 PM
|
#8
|
Join Date: Jun 2007
Location: Arm pit of the world... NJ
Posts: 2,677
|
Quote:
Originally Posted by greenformula92
Featherburner, I plan to use the factory 305 block
|
Do you have 3.25" stroke crank?
__________________
John
|
|
|
|
|
03-11-2012, 10:25 AM
|
#9
|
Join Date: May 2010
Location: Brick, NJ
Posts: 1,868
|
Quote:
Originally Posted by Featherburner
Do you have 3.25" stroke crank?
|
featherburner I am in the planning stages right now, the only thing I have in my pocession is the 081 heads. I am still looking for a car to carry this out on
__________________
Formerly known as blk95formula
86t/a_ram_air on TGO
2018 Silverado 1500
|
|
|
|
|
03-11-2012, 04:57 PM
|
#10
|
|
Co-Founder / Site Admin
Join Date: Jul 2004
Location: Ewing, NJ
Posts: 22,473
|
The old high-revving 327s are a completely different animal than the 305s. You can stroke a 305 to 334 (as you have already seen), but very few people waste the money.
- Justin
__________________
1999 Camry - Beigemobile DD
2002 Suburban - Wife's DD
2004 Grand Cherokee - Not running / Project / Selling?
|
|
|
|
|
03-11-2012, 05:45 PM
|
#11
|
Join Date: Jun 2007
Location: Arm pit of the world... NJ
Posts: 2,677
|
Get 305, pull the rods and crank out. Throw everything else away! Put rods and crank after machining in a freshly machined 350 block with 30 over pistons and enjoy a 355. Done!
__________________
John
|
|
|
|
|
03-11-2012, 06:38 PM
|
#12
|
Join Date: May 2010
Location: Brick, NJ
Posts: 1,868
|
Quote:
Originally Posted by Tru2Chevy
The old high-revving 327s are a completely different animal than the 305s. You can stroke a 305 to 334 (as you have already seen), but very few people waste the money.
- Justin
|
I don't see it as a waste, I see it as different, Im not looking to build a monster or a strip car. I am looking to build something that is just fun to drive. I think a 334 would be fun. It would make nice power and not entirely break the bank. I am not looking to be making crazy numbers, just some nice streetable pump gas numbers
__________________
Formerly known as blk95formula
86t/a_ram_air on TGO
2018 Silverado 1500
Last edited by greenformula92; 03-11-2012 at 06:38 PM.
|
|
|
|
|
03-11-2012, 09:31 PM
|
#13
|
|
Admin.
Join Date: Aug 2005
Location: Hamilton, NJ
Posts: 20,153
|
cost wise building a 1 pc 350 block would be about the same money.
Different is ok though
__________________
Vent Windows Forever!
The looser the waistband, the deeper the quicksand. Or so I have read.
Feather-light suspension, Konis just couldn't hold. I'm so glad I took a look inside your showroom doors.
Hey everybody, it's good to have you on the Baba-too-da-ba-too-ba-ba-buh-doo-ga-ga-bop-a-dop
|
|
|
|
|
03-12-2012, 06:01 AM
|
#14
|
Join Date: Dec 2010
Location: Hillsborough
Posts: 956
|
Quote:
Originally Posted by WildBillyT
Buy 88-WS6's car. Just needs an engine rebuild.
|
Yea what he said.
__________________
"Quality means doing it right when no one is looking."
- Henry F*rd
|
|
|
|
|
03-12-2012, 08:34 AM
|
#15
|
Join Date: May 2010
Location: Brick, NJ
Posts: 1,868
|
Quote:
Originally Posted by 88WS-6
Yea what he said.
|
LOL I was waiting for you to chime in. You have a nice car and I like it but right now you a little out of my budget on a price for a car at the moment
__________________
Formerly known as blk95formula
86t/a_ram_air on TGO
2018 Silverado 1500
|
|
|
|
|
03-15-2012, 09:13 AM
|
#16
|
Join Date: May 2010
Location: Brick, NJ
Posts: 1,868
|
ok so I bought my my starting point last night. It's a 92 RS Camaro 305 TBI automatic with 116,XXX miles. One of the trans cooler lines is leaking bad so ther transmisson won't do anything. I might get lucky if I replace the lines, drop the pan and do a filter and fill it back up. If it works I got a great deal. So my plan as of right now is to fix it and see what else it needs and get it driveable and then go from there.
Pictures are to follow. I have to go take them LOL
__________________
Formerly known as blk95formula
86t/a_ram_air on TGO
2018 Silverado 1500
|
|
|
|
|
03-15-2012, 10:26 AM
|
#17
|
|
12 Second Club
Join Date: Aug 2004
Location: Oradell
Posts: 8,369
|
nice, what color?
__________________
88 Camaro
95 Impala SS
97 Trans Am WS6
98 Blazer ZR2
00 Corvette
04 CTS-V
04 Grand Cherokee
07 Sublime Charger Daytona
09 Grand Cherokee Limited HEMI
12 Tahoe LT
17 Malibu LT
|
|
|
|
|
03-15-2012, 01:53 PM
|
#18
|
Join Date: May 2010
Location: Brick, NJ
Posts: 1,868
|
Dark Mettalic Purple
__________________
Formerly known as blk95formula
86t/a_ram_air on TGO
2018 Silverado 1500
|
|
|
|
|
03-15-2012, 01:59 PM
|
#19
|
|
The Mayor / 2009 Member of the Year / Moderator
Join Date: Jan 2005
Location: Northwest
Posts: 8,867
|
Quote:
Originally Posted by greenformula92
87-92 TBI T-top f body
5 Speed car
Body has to be decent, Paint condition no biggie, as long as its not yellow or purple
|
Quote:
Originally Posted by greenformula92
Dark Mettalic Purple
|
Oh the irony. I say keep the color though.
__________________
1995 Z28 Convertible A4 13.78 @ 100 (CAI, high flow cat, catback, 160 thermo, hypertech, Strano springs, Koni yellows, sway bars, 3 pt. UMI SFC)
2018 Sea Doo GTX - 3 cylinders and das boooooost
Quote:
Originally Posted by BonzoHansen
Is English your 2nd language? Did you graduate high school? Your posts make my head hurt.
|
 Team FARM 
|
|
|
|
|
03-15-2012, 02:11 PM
|
#20
|
Join Date: Feb 2005
Location: west orange nj
Posts: 2,415
|
i will pick tbi over tpi any day of the week its more simple to work on
|
|
|
|
|
03-15-2012, 04:03 PM
|
#21
|
|
12 Second Club
Join Date: Aug 2004
Location: Oradell
Posts: 8,369
|
Quote:
Originally Posted by Anti_Rice_Guy
Oh the irony. I say keep the color though.
|
lol that is a nice color
__________________
88 Camaro
95 Impala SS
97 Trans Am WS6
98 Blazer ZR2
00 Corvette
04 CTS-V
04 Grand Cherokee
07 Sublime Charger Daytona
09 Grand Cherokee Limited HEMI
12 Tahoe LT
17 Malibu LT
|
|
|
|
|
03-15-2012, 04:03 PM
|
#22
|
Join Date: May 2010
Location: Brick, NJ
Posts: 1,868
|
Quote:
Originally Posted by Anti_Rice_Guy
Oh the irony. I say keep the color though.
|
Lol I know. I was really reffering to the bright purple. The darker purple really grew on me
Pics will be up tonight
__________________
Formerly known as blk95formula
86t/a_ram_air on TGO
2018 Silverado 1500
Last edited by greenformula92; 03-15-2012 at 04:04 PM.
|
|
|
|
|
03-15-2012, 08:28 PM
|
#23
|
Join Date: May 2010
Location: Brick, NJ
Posts: 1,868
|
__________________
Formerly known as blk95formula
86t/a_ram_air on TGO
2018 Silverado 1500
Last edited by greenformula92; 03-17-2012 at 09:41 AM.
|
|
|
|
|
03-16-2012, 06:00 AM
|
#24
|
Join Date: Dec 2010
Location: Hillsborough
Posts: 956
|
Nice. Good luck with it.
__________________
"Quality means doing it right when no one is looking."
- Henry F*rd
|
|
|
|
|
03-17-2012, 02:44 PM
|
#25
|
Join Date: May 2010
Location: Brick, NJ
Posts: 1,868
|
Got some done on it today. first order of business was to get it in the garage, that was a workout let me tell ya. Then I got the hood off of it to make things a little easier. that hood will not be going back on the car. Ill be picking up a standard cowl hood at some point. then since the hood cable was stretched like no tomorrow and I had to unbolt the hood latch to get under the hood to begin with I pulled that out. and since the dash pad was so messed up and ill be getting another good one I pulled that too. so all in all a fairly productive day. I would have got the car up in the air but my floor jack decided that today was going to be the day it would leak all the fluid out so time for a new jack
__________________
Formerly known as blk95formula
86t/a_ram_air on TGO
2018 Silverado 1500
Last edited by greenformula92; 03-19-2012 at 08:46 AM.
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
|
|
