![Reply](http://www.njfboa.org/forums/images/buttons/reply.gif) |
07-17-2009, 12:55 AM
|
#1
|
Join Date: Jul 2004
Location: West Long Branch
Posts: 13,598
|
wheel adapters
Need an answer soon so I can have the car ready for Sunday.
I orderd a set of adapters for the 87 to fit its new wheels. I looked on TGO, read a bit around the internet, etc etc but had problems finding out exactly what size I should run up front.
I have C4 HD brake conversion done to the front, and it uses a custom made hub so that you can slide the large Corvette rotor on like you would on a modern car (4th gen) instead of having a hub/rotor combo.
Now, I was questioning if all this will move the hub outwards, meaning that the conventional 2 inch adapters used for third gens to put 4th gen wheels on would put the wheels too far out.
But when I put the IROC's on (front offset) they sat perfectly with the edge of the fender, meaning that it sits like factory, maybe a little farther out.
Now I was advised to purchase 1.5 thick adapters for the front because the brake upgrade can move the wheel outwards upto a .5 inch.
I got them yesterday, and the rears seem to fit ok, the fronts dont. I had picked up hub-centric adapters, but the center area is not cut deep enough to accept the larger aftermarket hub.
So now, I either have to buy a set of new hubs, return the ones I bought for the front, or take the ones I bought to a machine shop and have the rest of the center cut out. Problem I dont know any shop in the area that can do that. Any ideas?
__________________
2/20/2013: They Day the ****s Stopped
|
|
|
07-17-2009, 01:46 AM
|
#2
|
Join Date: Jul 2004
Location: West Long Branch
Posts: 13,598
|
im thinking Im gunna stay with the 1.5, but now I wanted to see if I could find a machine shop to cut it. There are a few in the area...guess Ill be making some calls tomorrow.
__________________
2/20/2013: They Day the ****s Stopped
|
|
|
07-17-2009, 04:34 AM
|
#3
|
Mongo the Meet Coordinator
Join Date: May 2008
Posts: 16,899
|
There is a machine shop over behind the fort, back by Gibbs hall area.
__________________
Quote:
Originally Posted by KirkEvil
repo bigals turd gen and part it out to a loving home
|
|
|
|
07-17-2009, 09:33 AM
|
#4
|
Join Date: Aug 2004
Location: North Jersey
Posts: 3,047
|
How much needs to be removed? Someone on another forum suggested using a cylinder hone like you'd find in the tool section of your store if it's not much.
__________________
Seeya,
Steve R. in North Jersey
'16 Go-Mango Dodge Charger R/T. It's so good to be back in a V8-powered, RWD car!
Former Toy - '88 Monte SS - had lots of mods...
|
|
|
07-17-2009, 11:08 AM
|
#5
|
Join Date: Jul 2004
Location: West Long Branch
Posts: 13,598
|
Its significant.
__________________
2/20/2013: They Day the ****s Stopped
|
|
|
07-17-2009, 11:10 AM
|
#6
|
Mongo the Meet Coordinator
Join Date: May 2008
Posts: 16,899
|
You have a day or two, get some sand paper and get to it.
__________________
Quote:
Originally Posted by KirkEvil
repo bigals turd gen and part it out to a loving home
|
|
|
|
07-17-2009, 05:31 PM
|
#7
|
Join Date: Jul 2004
Location: West Long Branch
Posts: 13,598
|
Thanks for the advice matt....
I found a great shop near red bank. Central metal something. I think the took advantage of me needing kinda soon but got it done fast.
__________________
2/20/2013: They Day the ****s Stopped
|
|
|
07-17-2009, 05:33 PM
|
#8
|
Mongo the Meet Coordinator
Join Date: May 2008
Posts: 16,899
|
How much was it?
__________________
Quote:
Originally Posted by KirkEvil
repo bigals turd gen and part it out to a loving home
|
|
|
|
07-17-2009, 05:36 PM
|
#9
|
Admin.
Join Date: Aug 2005
Location: Hamilton, NJ
Posts: 20,149
|
Quote:
Originally Posted by BigAls87Z28
Thanks for the advice matt....
I found a great shop near red bank. Central metal something. I think the took advantage of me needing kinda soon but got it done fast.
|
fast, cheap & easy, you can't have all 3!
__________________
Vent Windows Forever!
The looser the waistband, the deeper the quicksand. Or so I have read.
Feather-light suspension, Konis just couldn't hold. I'm so glad I took a look inside your showroom doors.
Hey everybody, it's good to have you on the Baba-too-da-ba-too-ba-ba-buh-doo-ga-ga-bop-a-dop
|
|
|
07-17-2009, 06:01 PM
|
#10
|
Join Date: Jul 2004
Location: West Long Branch
Posts: 13,598
|
45 bucks to machine the two. I figured somewhere in teh 25-35 range, but like Scott said....
Im gunna put them on in a bit, but I want to give that panhard bolt another try. I rented a 2 ft breaker bar from work to give it a shot.
__________________
2/20/2013: They Day the ****s Stopped
|
|
|
07-17-2009, 06:03 PM
|
#11
|
Mongo the Meet Coordinator
Join Date: May 2008
Posts: 16,899
|
45 bucks is a steal man.
And I have a big 1/2 breaker bar.... shoulda asked...
__________________
Quote:
Originally Posted by KirkEvil
repo bigals turd gen and part it out to a loving home
|
Last edited by LTb1ow; 07-17-2009 at 06:04 PM.
|
|
|
07-17-2009, 06:11 PM
|
#12
|
Meet Coordinator
Join Date: Jan 2008
Location: brick/pt. pleasant beach
Posts: 19,341
|
i have a nice breaker bar that i had a 4 foot pole on the other day. snapped three studs with it. ****ers were seized on. if you run into ****, let me know.
i just did a 3rd gen rear swap on my buddies and i think we ended up with 2 extra phb bolts. not in the best shape but just in case. anyways, the metal sleeve inside the lca bushing seized onto the bolt. yeah that was fun, got it off.....in pieces. just text and call a cab
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
|
|