Today's Posts Mark Forums Read Calendar
Go Back   NJFBOA - Home of New Jersey's Camaros and Firebirds > Classified Forums > Classifieds Forums > For Sale - Automotive Parts

Notices


Closed Thread
 
Thread Tools
Old 08-22-2006, 08:14 PM   #1
project89
 
Join Date: Mar 2006
Location: sayreville nj
Posts: 2,175
iTrader: (0)
clean up time

#1 T04E stage 5 turbo .63/.50AR - 300$
#2 blitz style bov - 75$
#3 turbo xs bov - 75$
#4 misc silicone couplers
2.0 to 2.5 inch 15$
three 2.5 inch couplers 25$ for all
two 2.5 to 3.0 inch couplers 25$ for both
#5 misc nitrous an feed lines $30's each
#6 2,400 stall B&M converter 30 pline 700r4 250$'s
#7 1 set third gen mid length headers $100
#8 edlebrock 650 carb 100$'s
#9 edlebrock air gap 100$'s
#10 walboro 255lph pump new in box 100$'s
#11 new weld draglites with hoosier 26x9x15 non dot slick do5 compound 2 passes no burnouts 450$'s
#12 misc gauges
autometer water temp phantom 15$'s needs new sender
faze afr 50$'s
faze boost/vac 50$'s
more will be added
__________________
#1 1989 RS - 3.0L V6 11.0-1 CR, LIGHTENED CRANK,J.E FORGED PISTONS, CUSTOM 280/284 .575/.575 116LSA ROLLER CAM, PORTED HEADS, PORTED INTAKE,CUSTOM TURBO KIT W/ BW S475,AW INTERCOOLER,METHANOL INJECTION, TCI STREETFIGHTER 700R4 W/ TCI 4,500 STALL,TWIN WALBORO 255'S & 83# INJECTORS
268 rwhp & 367.6 ftlbs @ 10 psi 3.1l
12.30's @ 112 3.1L @ 9 psi
??.?? @ ???? 3.0L @ 18 PSI
project89 is offline  
Old 08-23-2006, 01:48 PM   #2
project89
 
Join Date: Mar 2006
Location: sayreville nj
Posts: 2,175
iTrader: (0)
#1 regal turbo (draw threw carb style) 150# .83/.60AR
#2 misc injectors
3.4 injectors 25$'s
350 tpi injectors 25#'s
30# injectors 100$'s
#3 steel 1.5 rockers new 75$
#4 2 used sbc water pumps 15$'s
#5 assorted automatic flywheels 10$ each
#6 vortec 6-1 fmu 80$'s
#7 2 cherry bomb turbo mufflers offest in/out 2.5 inch 20$'s
#8 brand new ported gen 2 60* heads complete 600$'s
#9 3.4 block cleaned preped and bored .030 over 300$'s
#10 crower crank for 60* motor 1,200 $'s firm
#11 forged 327 small journal H-beam rods machined to fit 60* motors 200$'s
#12 j.e forged pistions for 3.4 for use with aluminum heads 8.5-1 cr with 25cc heads 500$'s
more to add later
slicks = pending sale
fuel pump = pending sale
all turbo stuff except the regal turbo = pending sale
__________________
#1 1989 RS - 3.0L V6 11.0-1 CR, LIGHTENED CRANK,J.E FORGED PISTONS, CUSTOM 280/284 .575/.575 116LSA ROLLER CAM, PORTED HEADS, PORTED INTAKE,CUSTOM TURBO KIT W/ BW S475,AW INTERCOOLER,METHANOL INJECTION, TCI STREETFIGHTER 700R4 W/ TCI 4,500 STALL,TWIN WALBORO 255'S & 83# INJECTORS
268 rwhp & 367.6 ftlbs @ 10 psi 3.1l
12.30's @ 112 3.1L @ 9 psi
??.?? @ ???? 3.0L @ 18 PSI

Last edited by project89; 08-23-2006 at 01:58 PM.
project89 is offline  
Old 08-23-2006, 02:03 PM   #3
project89
 
Join Date: Mar 2006
Location: sayreville nj
Posts: 2,175
iTrader: (0)
2 seperate alumapro bp-12 enclosures
#1 has original alumapro driver = 500
#2 has a diesil auido driver = 400 both for 750$'s
amps
#1 rockford 301m 400 watts rms/950 peak 200$'s
have to look up specs on the alipne amp but pretty sure its 300/700

nitrous stuff
#1 5 pound no2 bottle Make offer
#2 10 pound nx bottle make offer

misc stuff
#1 tpi/v6 camaro dual snorkle air box make offer
#2 ram air conversion kit for thirdgen camaros make offer

cars
#1 89 rs camaro sold as roller or with new 3.1 engin/built trans/no turbo needs paint/minor body work and a head liner 1Le swaybars/springs wonderbar/and custom stb brace make offer
__________________
#1 1989 RS - 3.0L V6 11.0-1 CR, LIGHTENED CRANK,J.E FORGED PISTONS, CUSTOM 280/284 .575/.575 116LSA ROLLER CAM, PORTED HEADS, PORTED INTAKE,CUSTOM TURBO KIT W/ BW S475,AW INTERCOOLER,METHANOL INJECTION, TCI STREETFIGHTER 700R4 W/ TCI 4,500 STALL,TWIN WALBORO 255'S & 83# INJECTORS
268 rwhp & 367.6 ftlbs @ 10 psi 3.1l
12.30's @ 112 3.1L @ 9 psi
??.?? @ ???? 3.0L @ 18 PSI

Last edited by project89; 08-23-2006 at 02:08 PM.
project89 is offline  
Old 08-23-2006, 02:17 PM   #4
Tru2Chevy
Co-Founder / Site Admin
 
Tru2Chevy's Avatar
 
Join Date: Jul 2004
Location: Ewing, NJ
Posts: 22,473
iTrader: (8)
Social Networks:

Quote:
Originally Posted by lethalrides2k3
#1 89 rs camaro sold as roller or with new 3.1 engin/built trans/no turbo needs paint/minor body work and a head liner 1Le swaybars/springs wonderbar/and custom stb brace make offer
Care to sell the hood from it?

- Justin
__________________
1999 Camry - Beigemobile DD
2002 Suburban - Wife's DD
2004 Grand Cherokee - Not running / Project / Selling?

Tru2Chevy is offline  
Old 08-23-2006, 02:19 PM   #5
project89
 
Join Date: Mar 2006
Location: sayreville nj
Posts: 2,175
iTrader: (0)
no i dont have another hood to put on the car,unless u can find me one the right color lol
__________________
#1 1989 RS - 3.0L V6 11.0-1 CR, LIGHTENED CRANK,J.E FORGED PISTONS, CUSTOM 280/284 .575/.575 116LSA ROLLER CAM, PORTED HEADS, PORTED INTAKE,CUSTOM TURBO KIT W/ BW S475,AW INTERCOOLER,METHANOL INJECTION, TCI STREETFIGHTER 700R4 W/ TCI 4,500 STALL,TWIN WALBORO 255'S & 83# INJECTORS
268 rwhp & 367.6 ftlbs @ 10 psi 3.1l
12.30's @ 112 3.1L @ 9 psi
??.?? @ ???? 3.0L @ 18 PSI
project89 is offline  
Old 08-23-2006, 02:21 PM   #6
Tru2Chevy
Co-Founder / Site Admin
 
Tru2Chevy's Avatar
 
Join Date: Jul 2004
Location: Ewing, NJ
Posts: 22,473
iTrader: (8)
Social Networks:

Quote:
Originally Posted by lethalrides2k3
no i dont have another hood to put on the car,unless u can find me one the right color lol
PM Sent....

- Justin
__________________
1999 Camry - Beigemobile DD
2002 Suburban - Wife's DD
2004 Grand Cherokee - Not running / Project / Selling?

Tru2Chevy is offline  
Old 08-23-2006, 11:19 PM   #7
project89
 
Join Date: Mar 2006
Location: sayreville nj
Posts: 2,175
iTrader: (0)
car/w turbo setup is pending a trade in on another car.
__________________
#1 1989 RS - 3.0L V6 11.0-1 CR, LIGHTENED CRANK,J.E FORGED PISTONS, CUSTOM 280/284 .575/.575 116LSA ROLLER CAM, PORTED HEADS, PORTED INTAKE,CUSTOM TURBO KIT W/ BW S475,AW INTERCOOLER,METHANOL INJECTION, TCI STREETFIGHTER 700R4 W/ TCI 4,500 STALL,TWIN WALBORO 255'S & 83# INJECTORS
268 rwhp & 367.6 ftlbs @ 10 psi 3.1l
12.30's @ 112 3.1L @ 9 psi
??.?? @ ???? 3.0L @ 18 PSI
project89 is offline  
Old 08-24-2006, 09:01 AM   #8
Untamed
 
Untamed's Avatar
 
Join Date: Aug 2004
Location: Hillsborough, NJ
Posts: 3,200
iTrader: (1)
The dual snorkel airbox, is this an original or home made? Is it the large round box that fits carb or TBI cars?
__________________
I USED TO HAVE an 85 Camaro 305 4bbl, 90 Firebird V6, 97 Firebird V6 (10 speakers!). Despite the two family vehicles, 3 kids, wife and mortgage, I can finally realize the dream - 88 TA almost all stock... for now.

http://www.cardomain.com/id/untameddave

Wanted this - , but ended up with this - for free. Can't argue with free.
Untamed is offline  
Old 08-24-2006, 03:27 PM   #9
project89
 
Join Date: Mar 2006
Location: sayreville nj
Posts: 2,175
iTrader: (0)
ist original,but its a tpi box
__________________
#1 1989 RS - 3.0L V6 11.0-1 CR, LIGHTENED CRANK,J.E FORGED PISTONS, CUSTOM 280/284 .575/.575 116LSA ROLLER CAM, PORTED HEADS, PORTED INTAKE,CUSTOM TURBO KIT W/ BW S475,AW INTERCOOLER,METHANOL INJECTION, TCI STREETFIGHTER 700R4 W/ TCI 4,500 STALL,TWIN WALBORO 255'S & 83# INJECTORS
268 rwhp & 367.6 ftlbs @ 10 psi 3.1l
12.30's @ 112 3.1L @ 9 psi
??.?? @ ???? 3.0L @ 18 PSI
project89 is offline  
Old 08-24-2006, 04:54 PM   #10
WayFast84
 
WayFast84's Avatar
 
Join Date: Nov 2005
Location: Edison
Posts: 7,856
iTrader: (7)
how much for the regal turbo?

turbo lg4!!!!!!! lol
WayFast84 is offline  
Old 08-24-2006, 04:57 PM   #11
project89
 
Join Date: Mar 2006
Location: sayreville nj
Posts: 2,175
iTrader: (0)
i thought u were buying that engine from me
its 150$
__________________
#1 1989 RS - 3.0L V6 11.0-1 CR, LIGHTENED CRANK,J.E FORGED PISTONS, CUSTOM 280/284 .575/.575 116LSA ROLLER CAM, PORTED HEADS, PORTED INTAKE,CUSTOM TURBO KIT W/ BW S475,AW INTERCOOLER,METHANOL INJECTION, TCI STREETFIGHTER 700R4 W/ TCI 4,500 STALL,TWIN WALBORO 255'S & 83# INJECTORS
268 rwhp & 367.6 ftlbs @ 10 psi 3.1l
12.30's @ 112 3.1L @ 9 psi
??.?? @ ???? 3.0L @ 18 PSI
project89 is offline  
Old 08-24-2006, 07:43 PM   #12
WayFast84
 
WayFast84's Avatar
 
Join Date: Nov 2005
Location: Edison
Posts: 7,856
iTrader: (7)
i am getting the engine from you..

I just wanted to see how much you wanted for the turbo, because it said blow through carb style or what ever
WayFast84 is offline  
Old 08-24-2006, 08:09 PM   #13
project89
 
Join Date: Mar 2006
Location: sayreville nj
Posts: 2,175
iTrader: (0)
draw threw
__________________
#1 1989 RS - 3.0L V6 11.0-1 CR, LIGHTENED CRANK,J.E FORGED PISTONS, CUSTOM 280/284 .575/.575 116LSA ROLLER CAM, PORTED HEADS, PORTED INTAKE,CUSTOM TURBO KIT W/ BW S475,AW INTERCOOLER,METHANOL INJECTION, TCI STREETFIGHTER 700R4 W/ TCI 4,500 STALL,TWIN WALBORO 255'S & 83# INJECTORS
268 rwhp & 367.6 ftlbs @ 10 psi 3.1l
12.30's @ 112 3.1L @ 9 psi
??.?? @ ???? 3.0L @ 18 PSI
project89 is offline  
Old 08-25-2006, 02:53 PM   #14
97ws6
 
Join Date: Dec 2005
Posts: 87
iTrader: (1)
My friend is interested in the 650 carb, shoot him am email when you get a chance. joe_bianco@cable.comcast.com
97ws6 is offline  
Old 08-26-2006, 12:44 PM   #15
project89
 
Join Date: Mar 2006
Location: sayreville nj
Posts: 2,175
iTrader: (0)
Quote:
Originally Posted by 97ws6
My friend is interested in the 650 carb, shoot him am email when you get a chance. joe_bianco@cable.comcast.com
its gone,i may be able to get another though
updated list
2 seperate alumapro bp-12 enclosures
#1 has original alumapro driver = 500
#2 has a diesil auido driver = 400 both for 750$'s
amps
#1 rockford 301m 400 watts rms/950 peak 200$'s
have to look up specs on the alipne amp but pretty sure its 300/700

#1 regal turbo (draw threw carb style) 150# .83/.60AR
#3 steel 1.5 rockers new 75$
#4 2 used sbc water pumps 15$'s
#5 assorted automatic flywheels 10$ each
this stuff i really need gone
#8 brand new ported gen 2 60* heads complete 600$'s
#9 3.4 block cleaned preped and bored .030 over 300$'s
#10 crower forged crank for 60* motor (3.1/3.4 or used to stroke 2.8 to 3.1/3.4L 1,200 $'s firm
#11 forged 327 small journal H-beam rods machined to fit 60* motors 200$'s
#12 .030 j.e forged pistions for 3.4 for use with aluminum heads 8.5-1 cr with 25cc heads 500$
or take complet longblock for 2,300$'s
__________________
#1 1989 RS - 3.0L V6 11.0-1 CR, LIGHTENED CRANK,J.E FORGED PISTONS, CUSTOM 280/284 .575/.575 116LSA ROLLER CAM, PORTED HEADS, PORTED INTAKE,CUSTOM TURBO KIT W/ BW S475,AW INTERCOOLER,METHANOL INJECTION, TCI STREETFIGHTER 700R4 W/ TCI 4,500 STALL,TWIN WALBORO 255'S & 83# INJECTORS
268 rwhp & 367.6 ftlbs @ 10 psi 3.1l
12.30's @ 112 3.1L @ 9 psi
??.?? @ ???? 3.0L @ 18 PSI

Last edited by project89; 08-26-2006 at 12:47 PM.
project89 is offline  
Old 08-27-2006, 12:06 PM   #16
project89
 
Join Date: Mar 2006
Location: sayreville nj
Posts: 2,175
iTrader: (0)
delete this thread plz
__________________
#1 1989 RS - 3.0L V6 11.0-1 CR, LIGHTENED CRANK,J.E FORGED PISTONS, CUSTOM 280/284 .575/.575 116LSA ROLLER CAM, PORTED HEADS, PORTED INTAKE,CUSTOM TURBO KIT W/ BW S475,AW INTERCOOLER,METHANOL INJECTION, TCI STREETFIGHTER 700R4 W/ TCI 4,500 STALL,TWIN WALBORO 255'S & 83# INJECTORS
268 rwhp & 367.6 ftlbs @ 10 psi 3.1l
12.30's @ 112 3.1L @ 9 psi
??.?? @ ???? 3.0L @ 18 PSI
project89 is offline  
Closed Thread

  NJFBOA - Home of New Jersey's Camaros and Firebirds > Classified Forums > Classifieds Forums > For Sale - Automotive Parts


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

» Sponsor List














All times are GMT -5. The time now is 07:17 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.