![Reply](http://www.njfboa.org/forums/images/buttons/reply.gif) |
02-02-2017, 05:12 PM
|
#1
|
Resident Camera Guy
Join Date: Aug 2004
Location: North Jersey
Posts: 10,971
|
OBDI Digital Displays
I've seen people connecting old Android tablets to OBDII cars, but does something like that exist for an OBDI? Exploring inexpensive options to replace a gauge cluster with a tablet for a true digital display. Probably a stretch, I'm not a wiring genius either.
__________________
|
|
|
02-02-2017, 07:06 PM
|
#2
|
Power Member / trans break does not equal transbrake
Join Date: May 2009
Location: The Meadowlands
Posts: 4,513
|
Quote:
Originally Posted by ar0ck
I've seen people connecting old Android tablets to OBDII cars, but does something like that exist for an OBDI? Exploring inexpensive options to replace a gauge cluster with a tablet for a true digital display. Probably a stretch, I'm not a wiring genius either.
|
Honestly, you may want to contact plotkin on this one alex.
__________________
99 Z28 - SBE LS1/60e
Motor - 10.84 @ 128 - 1.47 60'
Nitrous - 10.16 @ 132 - 1.40 60"
|
|
|
02-03-2017, 08:32 AM
|
#3
|
Join Date: May 2008
Posts: 817
|
Check out ALDLdroid. I'm not sure what the refresh rate is for most of the Bluetooth adapters but a lot of the homebrew stuff I've seen is a little slow for a cluster replacement
I've been messing with OBDII over Bluetooth with a Raspberry Pi, using a Pi or Arduino makes it easier to add additional aftermarket sensors down the road:
OBDII is a lot more standardized and well documented but I'm sure it would be possible to do the same for OBDI
__________________
|2000 Trans Am|T56 swap|Bolt Ons| Suspension|
Last edited by creeper; 02-03-2017 at 08:39 AM.
|
|
|
02-03-2017, 09:22 AM
|
#4
|
Admin.
Join Date: Aug 2005
Location: Hamilton, NJ
Posts: 20,150
|
Odb1 wont know fuel level, will it? Or oil psi?
My old otc scanner would return vss, cts, rpm. So those are there.
So will your odb1 feed all the gauges?
__________________
Vent Windows Forever!
The looser the waistband, the deeper the quicksand. Or so I have read.
Feather-light suspension, Konis just couldn't hold. I'm so glad I took a look inside your showroom doors.
Hey everybody, it's good to have you on the Baba-too-da-ba-too-ba-ba-buh-doo-ga-ga-bop-a-dop
|
|
|
02-03-2017, 09:33 AM
|
#5
|
Resident Camera Guy
Join Date: Aug 2004
Location: North Jersey
Posts: 10,971
|
Quote:
Originally Posted by BonzoHansen
Odb1 wont know fuel level, will it? Or oil psi?
My old otc scanner would return vss, cts, rpm. So those are there.
So will your odb1 feed all the gauges?
|
Good questions, this was more of an off the hip question; but theoretically: If I can just do a digital display for speedometer and tachometer off a small tablet I'd be interested, anything else is just an added perk since I'm assuming OBDI is pretty simplistic in what can be converted.
I'm sure with the right size display mounted on an ABS plastic backing where the old gauges would be, I could still run electric auto-meter gauges for some of those stand alone things like Fuel & Oil. I have plenty of real-estate to spare where the radio was or even in the vents, but I also don't want it looking like I'm in the cockpit of an airplane, the whole point is minimalism.
__________________
Last edited by ar0ck; 02-03-2017 at 09:39 AM.
|
|
|
02-03-2017, 10:09 AM
|
#6
|
Meet Coordinator
Join Date: Jan 2008
Location: brick/pt. pleasant beach
Posts: 19,341
|
Convert to ls pcm, obd2, and change some sensors
|
|
|
02-03-2017, 10:29 AM
|
#7
|
Mongo the Meet Coordinator
Join Date: May 2008
Posts: 16,899
|
You will end up doing what you would do just run autometers in the panel area.
OBD1 is very limited.
__________________
Quote:
Originally Posted by KirkEvil
repo bigals turd gen and part it out to a loving home
|
|
|
|
02-03-2017, 11:02 AM
|
#8
|
Admin.
Join Date: Aug 2005
Location: Hamilton, NJ
Posts: 20,150
|
And most of the wiring for gauges is probably already there.
__________________
Vent Windows Forever!
The looser the waistband, the deeper the quicksand. Or so I have read.
Feather-light suspension, Konis just couldn't hold. I'm so glad I took a look inside your showroom doors.
Hey everybody, it's good to have you on the Baba-too-da-ba-too-ba-ba-buh-doo-ga-ga-bop-a-dop
|
|
|
02-03-2017, 11:55 AM
|
#9
|
Mongo the Meet Coordinator
Join Date: May 2008
Posts: 16,899
|
Quote:
Originally Posted by BonzoHansen
And most of the wiring for gauges is probably already there.
|
if you are gonna do it, do it right
I would not trust stock senders any more than I trust stock gauges. Rip it all out, wire in new power to aftermarket gauges and use their harness/sending units.
__________________
Quote:
Originally Posted by KirkEvil
repo bigals turd gen and part it out to a loving home
|
|
|
|
02-03-2017, 01:48 PM
|
#10
|
Admin.
Join Date: Aug 2005
Location: Hamilton, NJ
Posts: 20,150
|
Quote:
Originally Posted by LTb1ow
if you are gonna do it, do it right
I would not trust stock senders any more than I trust stock gauges. Rip it all out, wire in new power to aftermarket gauges and use their harness/sending units.
|
I didnt say use stock sender, just the wiring. Oil psi, temp wiring is there, change the sender and connector. Factory fuel senders are better than most aftermarket, so that is done, and there is probably a vss lead for the curent speedo. Volt meter is easy peasy. There must be a tach signal at the factory gague somehow.
__________________
Vent Windows Forever!
The looser the waistband, the deeper the quicksand. Or so I have read.
Feather-light suspension, Konis just couldn't hold. I'm so glad I took a look inside your showroom doors.
Hey everybody, it's good to have you on the Baba-too-da-ba-too-ba-ba-buh-doo-ga-ga-bop-a-dop
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
|
|