Today's Posts Mark Forums Read Calendar
Go Back   NJFBOA - Home of New Jersey's Camaros and Firebirds > Camaros, Firebirds and the People that own them > Member's Projects

Notices


Reply
 
Thread Tools
Old 03-17-2016, 03:16 PM   #1
redsoxsstink
 
Join Date: Dec 2009
Location: milltown
Posts: 1,497
iTrader: (2)
Social Networks:

1971 Camaro LS3 build

My father and I got this project last fall as a roller with great paint. We had plans to do big block and a 4 speed in it. We built a mild 454 for it and purchased a m20. literally as we were getting done with the build and getting ready to drop it in, a LS3 came our way. So now we are going that route, LS3 carb, t56, and vintage air to turn it in to a real nice cruiser. I really wanted this plant for my IROC but my dad wanted something to race me with so he got it.

We slide in a GM ASA cam in the LS and are running a Holley 750 on top with a Holley carb intake, other than that stock valve train. For an oil pan we are using a CTSV pan, which should provide enough clearance. The t56 is on order, we plan to run a LS7 clutch in in with factory GM hydraulics (Bonzo i have been reading over your thread on Nasty for this swap). The car started off as a stick car so the pedals are already there. A 8.5in 10 bolt will be out back with 3.73, when that blows we plan to do 4.10s or higher. For an exhaust we are going with long tubes to GM performance mufflers out the back.

For wheels we have some gunmetal with polished lip torque thrust style 17x7 and 17x8 wrapped in BFG sport com IIs.

The interior had some funky 2 tone orange and black interior, so we will be doing fresh black carpet and redoing the seats. To go with the modern drive-train we will be wiring up all autometer guages. A sounds system if any hasnt been thought about yet.

Since pictures are the real reason you clicked this here are some. I dont have alot but will be posting more.






__________________
2002 Camaro Sunset Orange Mettalic, V6, 5spd, bilstein HD shocks and struts, eibach pro lowering kit, eibach f/r sway bars, lakewood PHB, UMI 2 point subframe connectors, energy suspensions poly master bushing kit
daily econobox and first car

1986 IROC-Z, T56, MGW shifter, Heads, Cam, Holley Stealth Ram 350, t-top, tubular LCA with relo brackets, adjustable PHB, belltech sway bars, ground control weight jacks, SLP mid length headers, 3in w/borla XR1, RIP 3 10 bolts, 12.7 @ 109 so far.. atleast its faster than stock SOLD

1971 Camaro LS3/T56/9in, cam only and still carbed, RIP 2 10 bolts, 11.62@121

03 Blazer 2 door - salt sponge

Last edited by redsoxsstink; 03-17-2016 at 03:22 PM.
redsoxsstink is offline   Reply With Quote
Old 03-17-2016, 04:20 PM   #2
sweetbmxrider
Meet Coordinator
 
sweetbmxrider's Avatar
 
Join Date: Jan 2008
Location: brick/pt. pleasant beach
Posts: 19,342
iTrader: (12)
Very cool. Are the stripes pearl?
__________________
sweetbmxrider is offline   Reply With Quote
Old 03-17-2016, 04:30 PM   #3
redsoxsstink
 
Join Date: Dec 2009
Location: milltown
Posts: 1,497
iTrader: (2)
Social Networks:

Quote:
Originally Posted by sweetbmxrider View Post
Very cool. Are the stripes pearl?
nah, they are kinda just there, just a different shade of orange
__________________
2002 Camaro Sunset Orange Mettalic, V6, 5spd, bilstein HD shocks and struts, eibach pro lowering kit, eibach f/r sway bars, lakewood PHB, UMI 2 point subframe connectors, energy suspensions poly master bushing kit
daily econobox and first car

1986 IROC-Z, T56, MGW shifter, Heads, Cam, Holley Stealth Ram 350, t-top, tubular LCA with relo brackets, adjustable PHB, belltech sway bars, ground control weight jacks, SLP mid length headers, 3in w/borla XR1, RIP 3 10 bolts, 12.7 @ 109 so far.. atleast its faster than stock SOLD

1971 Camaro LS3/T56/9in, cam only and still carbed, RIP 2 10 bolts, 11.62@121

03 Blazer 2 door - salt sponge
redsoxsstink is offline   Reply With Quote
Old 03-17-2016, 05:22 PM   #4
Blackbirdws6
Lord of the rings / 10 Second Club / Meet Coordinator
 
Blackbirdws6's Avatar
 
Join Date: Aug 2004
Location: Millstone Township, NJ
Posts: 6,361
iTrader: (3)
Should be a nice project. When do you plan on getting it done.
__________________

97 T/A Ram Air Convt
Forever dyno queen / 777rwhp 662 rwtq @ 17lbs / 10.2 @ 140

'24 Corvette Z06
17 Sierra 2500HD Dmax
81 Turbo TA
Blackbirdws6 is offline   Reply With Quote
Old 03-17-2016, 05:30 PM   #5
redsoxsstink
 
Join Date: Dec 2009
Location: milltown
Posts: 1,497
iTrader: (2)
Social Networks:

Quote:
Originally Posted by Blackbirdws6 View Post
Should be a nice project. When do you plan on getting it done.
Hopefully before May 19th, I want to take it to Cruising OCMD
__________________
2002 Camaro Sunset Orange Mettalic, V6, 5spd, bilstein HD shocks and struts, eibach pro lowering kit, eibach f/r sway bars, lakewood PHB, UMI 2 point subframe connectors, energy suspensions poly master bushing kit
daily econobox and first car

1986 IROC-Z, T56, MGW shifter, Heads, Cam, Holley Stealth Ram 350, t-top, tubular LCA with relo brackets, adjustable PHB, belltech sway bars, ground control weight jacks, SLP mid length headers, 3in w/borla XR1, RIP 3 10 bolts, 12.7 @ 109 so far.. atleast its faster than stock SOLD

1971 Camaro LS3/T56/9in, cam only and still carbed, RIP 2 10 bolts, 11.62@121

03 Blazer 2 door - salt sponge
redsoxsstink is offline   Reply With Quote
Old 03-17-2016, 07:21 PM   #6
6spdg37s
 
Join Date: Feb 2016
Posts: 692
iTrader: (0)
nice i like it !
6spdg37s is offline   Reply With Quote
Old 03-17-2016, 08:25 PM   #7
stoney2677
 
Join Date: Mar 2007
Location: metuchen
Posts: 234
iTrader: (4)
Where in thee hell did you find such a nice roller? Reminds me of mine except waaaay nicer.
stoney2677 is offline   Reply With Quote
Old 03-17-2016, 11:29 PM   #8
aps63
 
aps63's Avatar
 
Join Date: Jan 2011
Location: NJ
Posts: 88
iTrader: (0)
My 2 favorite Camaro's. Cars look great.
Did you paint the LS3 or just blast everything.
Looks awesome!!!!!
__________________
- Paul

Formerly known as 1970 RS

My Garage Project -
http://www.garagejournal.com/forum/s...d.php?t=189511
aps63 is offline   Reply With Quote
Old 03-18-2016, 09:35 AM   #9
Jersey Mike
Power Member/NJFBOA Bookie/Moderator
 
Jersey Mike's Avatar
 
Join Date: Jun 2009
Location: North Jersey = Best Jersey.
Posts: 4,435
iTrader: (12)
Social Networks:

How does a LS3 just "come your way." Looking forward to this one!
__________________

1995 Firebird... Stock-ish.
Quote:
Originally Posted by LS1ow View Post
Good. He microwaved my phone 6 years ago, i hope his intake erupts.
Jersey Mike is offline   Reply With Quote
Old 03-18-2016, 11:06 AM   #10
redsoxsstink
 
Join Date: Dec 2009
Location: milltown
Posts: 1,497
iTrader: (2)
Social Networks:

Quote:
Originally Posted by stoney2677 View Post
Where in thee hell did you find such a nice roller? Reminds me of mine except waaaay nicer.
drove out to the baltimore area to get it

Quote:
Originally Posted by aps63 View Post
My 2 favorite Camaro's. Cars look great.
Did you paint the LS3 or just blast everything.
Looks awesome!!!!!
we put in in the parts washer for a hour or too and then sprayed it with VHT engine paint

Quote:
Originally Posted by Jersey Mike View Post
How does a LS3 just "come your way." Looking forward to this one!
someone was parting out a car and we got a good deal on it
__________________
2002 Camaro Sunset Orange Mettalic, V6, 5spd, bilstein HD shocks and struts, eibach pro lowering kit, eibach f/r sway bars, lakewood PHB, UMI 2 point subframe connectors, energy suspensions poly master bushing kit
daily econobox and first car

1986 IROC-Z, T56, MGW shifter, Heads, Cam, Holley Stealth Ram 350, t-top, tubular LCA with relo brackets, adjustable PHB, belltech sway bars, ground control weight jacks, SLP mid length headers, 3in w/borla XR1, RIP 3 10 bolts, 12.7 @ 109 so far.. atleast its faster than stock SOLD

1971 Camaro LS3/T56/9in, cam only and still carbed, RIP 2 10 bolts, 11.62@121

03 Blazer 2 door - salt sponge
redsoxsstink is offline   Reply With Quote
Old 03-18-2016, 06:03 PM   #11
B4C
 
Join Date: May 2007
Location: Jim Thorpe PA
Posts: 2,133
iTrader: (1)
Quote:
Originally Posted by redsoxsstink View Post
drove out to the baltimore area to get it
I think that I saw it on craigslist. I never understood doing all the work to ls swap and leaving the carb on it. To each their own.
__________________
01 SS 383 stroker, Magnum F, 9in.
86 Trans-Am 355 t56
B4C is offline   Reply With Quote
Old 03-19-2016, 11:30 AM   #12
redsoxsstink
 
Join Date: Dec 2009
Location: milltown
Posts: 1,497
iTrader: (2)
Social Networks:

Quote:
Originally Posted by B4C View Post
I think that I saw it on craigslist. I never understood doing all the work to ls swap and leaving the carb on it. To each their own.
It's really not that much work to get the engine in the car. At this point in time though it is saving us roughly 1000 bucks when you factor in electronics, intake, fuel systems etc. I would have liked to do fuel injectiob. Possible might happen down the road.
__________________
2002 Camaro Sunset Orange Mettalic, V6, 5spd, bilstein HD shocks and struts, eibach pro lowering kit, eibach f/r sway bars, lakewood PHB, UMI 2 point subframe connectors, energy suspensions poly master bushing kit
daily econobox and first car

1986 IROC-Z, T56, MGW shifter, Heads, Cam, Holley Stealth Ram 350, t-top, tubular LCA with relo brackets, adjustable PHB, belltech sway bars, ground control weight jacks, SLP mid length headers, 3in w/borla XR1, RIP 3 10 bolts, 12.7 @ 109 so far.. atleast its faster than stock SOLD

1971 Camaro LS3/T56/9in, cam only and still carbed, RIP 2 10 bolts, 11.62@121

03 Blazer 2 door - salt sponge
redsoxsstink is offline   Reply With Quote
Old 03-24-2016, 04:11 PM   #13
Punkmaster 98
 
Punkmaster 98's Avatar
 
Join Date: Nov 2011
Location: Manalapan,NJ
Posts: 216
iTrader: (0)
This car is gonna be a beast
__________________
92 Firebird (First Car SOLD 2/18/17)
90 Firebird Formula 305 T5 Daily Driver (SOLD)
87 GTA Gunmetal RIP
1984 Trans Am 6.0 4L60E , Ford 8.8 3.55 gears
1991 Trans Am
1985 Iroc Z
2015 Silverado 2500HD
Punkmaster 98 is offline   Reply With Quote
Old 03-28-2016, 03:57 PM   #14
xrelapse13
 
Join Date: May 2008
Location: East Brunswick
Posts: 517
iTrader: (3)
looks like a nice project, may i ask why the ASA cam? Much better options out there.
__________________

2000 ws6
xrelapse13 is offline   Reply With Quote
Old 03-28-2016, 11:02 PM   #15
redsoxsstink
 
Join Date: Dec 2009
Location: milltown
Posts: 1,497
iTrader: (2)
Social Networks:

Quote:
Originally Posted by xrelapse13 View Post
looks like a nice project, may i ask why the ASA cam? Much better options out there.
Mainly because we can retain all the factory valve train components since it is not a very high lift cam at all. GM sells their ls3 crate with the asa and it makes around 530 crank hp which is perfect for this application.
__________________
2002 Camaro Sunset Orange Mettalic, V6, 5spd, bilstein HD shocks and struts, eibach pro lowering kit, eibach f/r sway bars, lakewood PHB, UMI 2 point subframe connectors, energy suspensions poly master bushing kit
daily econobox and first car

1986 IROC-Z, T56, MGW shifter, Heads, Cam, Holley Stealth Ram 350, t-top, tubular LCA with relo brackets, adjustable PHB, belltech sway bars, ground control weight jacks, SLP mid length headers, 3in w/borla XR1, RIP 3 10 bolts, 12.7 @ 109 so far.. atleast its faster than stock SOLD

1971 Camaro LS3/T56/9in, cam only and still carbed, RIP 2 10 bolts, 11.62@121

03 Blazer 2 door - salt sponge
redsoxsstink is offline   Reply With Quote
Old 03-28-2016, 11:16 PM   #16
redsoxsstink
 
Join Date: Dec 2009
Location: milltown
Posts: 1,497
iTrader: (2)
Social Networks:

Some updates.. turns out the vendor we were going through for the t56 was a fraud, we cant find a t56 we like right now for a decent price so we are going back with the Muncie we were originally going to use for the big block.

Also we dropped the engine and long tubes in today along with some other minor things.






__________________
2002 Camaro Sunset Orange Mettalic, V6, 5spd, bilstein HD shocks and struts, eibach pro lowering kit, eibach f/r sway bars, lakewood PHB, UMI 2 point subframe connectors, energy suspensions poly master bushing kit
daily econobox and first car

1986 IROC-Z, T56, MGW shifter, Heads, Cam, Holley Stealth Ram 350, t-top, tubular LCA with relo brackets, adjustable PHB, belltech sway bars, ground control weight jacks, SLP mid length headers, 3in w/borla XR1, RIP 3 10 bolts, 12.7 @ 109 so far.. atleast its faster than stock SOLD

1971 Camaro LS3/T56/9in, cam only and still carbed, RIP 2 10 bolts, 11.62@121

03 Blazer 2 door - salt sponge
redsoxsstink is offline   Reply With Quote
Old 03-29-2016, 10:31 PM   #17
BonzoHansen
Admin.
 
BonzoHansen's Avatar
 
Join Date: Aug 2005
Location: Hamilton, NJ
Posts: 20,153
iTrader: (27)
how are you handling the clutch?
__________________
Vent Windows Forever!

The looser the waistband, the deeper the quicksand. Or so I have read.

Feather-light suspension, Konis just couldn't hold. I'm so glad I took a look inside your showroom doors.

Hey everybody, it's good to have you on the Baba-too-da-ba-too-ba-ba-buh-doo-ga-ga-bop-a-dop
BonzoHansen is offline   Reply With Quote
Old 03-30-2016, 06:21 PM   #18
redsoxsstink
 
Join Date: Dec 2009
Location: milltown
Posts: 1,497
iTrader: (2)
Social Networks:

Quote:
Originally Posted by BonzoHansen View Post
how are you handling the clutch?
going to stick with the z-bar. We will be making the necessary brackets to mount it on the block/bellhousing.
__________________
2002 Camaro Sunset Orange Mettalic, V6, 5spd, bilstein HD shocks and struts, eibach pro lowering kit, eibach f/r sway bars, lakewood PHB, UMI 2 point subframe connectors, energy suspensions poly master bushing kit
daily econobox and first car

1986 IROC-Z, T56, MGW shifter, Heads, Cam, Holley Stealth Ram 350, t-top, tubular LCA with relo brackets, adjustable PHB, belltech sway bars, ground control weight jacks, SLP mid length headers, 3in w/borla XR1, RIP 3 10 bolts, 12.7 @ 109 so far.. atleast its faster than stock SOLD

1971 Camaro LS3/T56/9in, cam only and still carbed, RIP 2 10 bolts, 11.62@121

03 Blazer 2 door - salt sponge
redsoxsstink is offline   Reply With Quote
Old 04-01-2016, 10:46 AM   #19
xrelapse13
 
Join Date: May 2008
Location: East Brunswick
Posts: 517
iTrader: (3)
Quote:
Originally Posted by redsoxsstink View Post
Mainly because we can retain all the factory valve train components since it is not a very high lift cam at all. GM sells their ls3 crate with the asa and it makes around 530 crank hp which is perfect for this application.

Fair enough, was just curious cause it actually has a lower valve lift than a stock LS3 cam but with longer duration and a 110 LSA.
__________________

2000 ws6
xrelapse13 is offline   Reply With Quote
Old 04-11-2016, 12:08 AM   #20
redsoxsstink
 
Join Date: Dec 2009
Location: milltown
Posts: 1,497
iTrader: (2)
Social Networks:

After getting screwed on a few t56s we finally got one... This one being by far the best one yet. Its a t56 magnum, per the seller... has 18 miles on it. This is unverified but he gave us all the components that came from his 69 Camaro when he had the trans in there and everything looks great so i am going to believe him.

After doing some quick measurements, it looks like the shifter is going to come through the stock shifter hole with very little or no trimming when it is "reverse" mounted on the trans which is great. We are still fiddling with the motor mounts at this point to get it sitting right in the bay. But after that the trans is going in, fuel/brake lines, wiring gauges and first fire.
Attached Images
File Type: jpg Snapchat-4367664085002057389.jpg (92.8 KB, 16 views)
__________________
2002 Camaro Sunset Orange Mettalic, V6, 5spd, bilstein HD shocks and struts, eibach pro lowering kit, eibach f/r sway bars, lakewood PHB, UMI 2 point subframe connectors, energy suspensions poly master bushing kit
daily econobox and first car

1986 IROC-Z, T56, MGW shifter, Heads, Cam, Holley Stealth Ram 350, t-top, tubular LCA with relo brackets, adjustable PHB, belltech sway bars, ground control weight jacks, SLP mid length headers, 3in w/borla XR1, RIP 3 10 bolts, 12.7 @ 109 so far.. atleast its faster than stock SOLD

1971 Camaro LS3/T56/9in, cam only and still carbed, RIP 2 10 bolts, 11.62@121

03 Blazer 2 door - salt sponge
redsoxsstink is offline   Reply With Quote
Old 04-11-2016, 10:12 AM   #21
TaKid455
 
Join Date: Oct 2008
Posts: 586
iTrader: (1)
Hydraulic setup is fairly easy to do. I run that on my builds. Canned the bulky mechanical setup.
TaKid455 is offline   Reply With Quote
Old 04-11-2016, 10:17 AM   #22
WildBillyT
Ayatollah of Rock N Rolla / Admin
 
WildBillyT's Avatar
 
Join Date: Mar 2006
Location: Parts Unknown
Posts: 12,573
iTrader: (10)
Quote:
Originally Posted by TaKid455 View Post
Hydraulic setup is fairly easy to do. I run that on my builds. Canned the bulky mechanical setup.
I stayed mechanical with the T56/6023-PB and kind of regret it. Wish I had kept the hydraulics.
WildBillyT is offline   Reply With Quote
Old 04-11-2016, 12:21 PM   #23
redsoxsstink
 
Join Date: Dec 2009
Location: milltown
Posts: 1,497
iTrader: (2)
Social Networks:

We are going hydraulic now. Was gonna do mechanical on the muncie but hydraulic on the t56.
__________________
2002 Camaro Sunset Orange Mettalic, V6, 5spd, bilstein HD shocks and struts, eibach pro lowering kit, eibach f/r sway bars, lakewood PHB, UMI 2 point subframe connectors, energy suspensions poly master bushing kit
daily econobox and first car

1986 IROC-Z, T56, MGW shifter, Heads, Cam, Holley Stealth Ram 350, t-top, tubular LCA with relo brackets, adjustable PHB, belltech sway bars, ground control weight jacks, SLP mid length headers, 3in w/borla XR1, RIP 3 10 bolts, 12.7 @ 109 so far.. atleast its faster than stock SOLD

1971 Camaro LS3/T56/9in, cam only and still carbed, RIP 2 10 bolts, 11.62@121

03 Blazer 2 door - salt sponge
redsoxsstink is offline   Reply With Quote
Old 04-11-2016, 01:50 PM   #24
WildBillyT
Ayatollah of Rock N Rolla / Admin
 
WildBillyT's Avatar
 
Join Date: Mar 2006
Location: Parts Unknown
Posts: 12,573
iTrader: (10)
Good move, IMO.
WildBillyT is offline   Reply With Quote
Old 04-11-2016, 02:20 PM   #25
TaKid455
 
Join Date: Oct 2008
Posts: 586
iTrader: (1)
run a remote bleeder. Speedway sells a kit. Get the firewall bracket for the Fbody or Tick master. Several examples on the market. You can make one but they arent too expensive. Be sure to get the pedal to m/c geometry correct or within acceptable parameters.
TaKid455 is offline   Reply With Quote
Reply

  NJFBOA - Home of New Jersey's Camaros and Firebirds > Camaros, Firebirds and the People that own them > Member's Projects


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

» Sponsor List














All times are GMT -5. The time now is 05:29 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.