misc. problems with opti/cap/rotor installs
1)msd kit comes with 2 orings.
You only use one of the orings. The round one is the old style and the square one is the new kind because people were having problems with the round staying in place. This would cause the rotor to rub on the cap. That being said, use the square one.
__________________
2)Installation notes:
Make SURE you install the Oring correctly, if you dont the rotor will rub on the optical disk cover and it will fail. MSD is now making a gasket as a replacement to the Oring, you can get one from them.
The Oring installs on the small machined lip on the middle of the aluminum flange, DO NOT mount it inbetween the plastic optical disk cover and the aluminum flange.
__________________
Quote:
Originally Posted by SRGN
I never pulled into the staging beams at the track and saw a dyno in the other lane.
|
South Jersey Racecraft
|