![Reply](http://www.njfboa.org/forums/images/buttons/reply.gif) |
07-27-2009, 01:16 PM
|
#1
|
Join Date: Jun 2009
Posts: 38
|
ABS Light
So my ABS light is on...And when it rains the brake and low trac light flicker on and off.....and when i step on the brake they stay solid. When on solid after stepping on the brake for 3 second they go off till the brake is released. HAS ANYONE SEEN THIS BEFORE????? 1995 camaro lt1
Last edited by njcamarokid; 07-27-2009 at 01:53 PM.
|
|
|
07-27-2009, 01:43 PM
|
#2
|
Meet Coordinator
Join Date: Jan 2008
Location: brick/pt. pleasant beach
Posts: 19,341
|
what kind of car is it? year?
|
|
|
07-27-2009, 01:54 PM
|
#3
|
Join Date: Jun 2009
Posts: 38
|
ops sorry edited it
|
|
|
07-27-2009, 02:08 PM
|
#4
|
Mongo the Meet Coordinator
Join Date: May 2008
Posts: 16,899
|
Check the ground post on the passenger side.
__________________
Quote:
Originally Posted by KirkEvil
repo bigals turd gen and part it out to a loving home
|
|
|
|
07-27-2009, 04:04 PM
|
#5
|
Meet Coordinator
Join Date: Jan 2008
Location: brick/pt. pleasant beach
Posts: 19,341
|
try taking it to a shop and have them scan it for codes. sounds like an abs issue though.
|
|
|
07-27-2009, 05:27 PM
|
#6
|
Join Date: Oct 2008
Posts: 814
|
I have had an issue with my 95 Z28, the ABS light has been on since I bought the car, did the brakes all around, put a new abs sensor in, reset the computer, still on. Went to the shop and absolutely no codes pop up..now tell me what the hell that could be?
__________________
Formerly known as njbadaSS
|
|
|
07-27-2009, 07:48 PM
|
#7
|
Banned
Join Date: Dec 2007
Posts: 1,106
|
IMO sounds like your calipers are sticking or your master cylinder/ABS block is going.
Take it to a brake shop if you can't do brakes on your own.
|
|
|
07-28-2009, 07:19 AM
|
#8
|
Meet Coordinator
Join Date: Jan 2008
Location: brick/pt. pleasant beach
Posts: 19,341
|
njbadss, could be a rubbed wire or the abs computer (EBCM or EBTCM)
can you look at the datastream for the abs?
|
|
|
07-30-2009, 06:54 PM
|
#9
|
Guest
|
call up SJM Manufacturing and get then ABS Delete kit and take the bulb out
|
|
|
07-30-2009, 07:28 PM
|
#10
|
Join Date: Oct 2008
Posts: 814
|
Quote:
Originally Posted by sweetbmxrider
njbadss, could be a rubbed wire or the abs computer (EBCM or EBTCM)
can you look at the datastream for the abs?
|
already had everything looked at last week at the mechanic shop and no sign of the issue..stumped them as well bc no codes come up on the computer and like I said, I put a new abs sensor in,did all new brakes all around, reset the computer..no luck still
__________________
Formerly known as njbadaSS
|
|
|
07-30-2009, 09:31 PM
|
#11
|
Join Date: May 2009
Location: Highland Mills, NY
Posts: 1,915
|
NJKID sounds like a wiring problem somewhere in the ABS cicruit
see if your abs is actually working NJBA, possbile cluster problem?, what scan tool did they use. Did they not get a code or did it not communicate. i have had to replace a few block because they were not communicating.
__________________
2000 Camaro SS 610rwhp/570rwtq LS2 440, 12 bolt 3.73, tranzilla t56
Last edited by MyFirstZ; 07-30-2009 at 09:32 PM.
|
|
|
07-31-2009, 07:22 AM
|
#12
|
Join Date: Aug 2004
Location: Hillsborough, NJ
Posts: 2,630
|
Most times I've seen an ABS sensor come on with one of my vehicles it's been a bad wheel speed sensor. Either the sensor goes bad or crud gets inbetween the sensor and the magnetic ring. If you jack the car up and disconnect the pigtail for the sensor on each wheel you can probe a multimeter into that connector. Then spin the wheel and see if your resistance numbers go up and down smoothly. If they do then the sensor is ok. If it stays in one spot or barely moves then you have a bad sensor.
__________________
--==RPM Resto & Custom==--
1989 IROC-Z Media Coverage:
Chevy High Performance - Readers Rides 4/03
GM High Tech Performance - Tech Article 3/06
Chevy Rumble - Tech & Feature Articles November 2006
Auto Restorer Magazine - Feature Article 5/11
SkinAndSteel.com
|
|
|
09-25-2009, 11:28 PM
|
#13
|
Join Date: Aug 2005
Location: Blackwood, NJ
Posts: 2,295
|
Pull the bulb for the ABS Light!! Problem solved!!
__________________
Jeff
2002 WS6 T/A.. M6..Built 383 TMR tune..461rwhp,458rwtq
2009 G8 GT. Bone stock 13.6@103.. Vararam Intake, GXP Axlebacks, LS2 FRC's
1998 Corvette Convertible, Vararam Intake+Power Duct, Fast 90/90, Ti Axleback..12.8@110
2003 Cobra Convertible 10th Anniversary
http://www.fquick.com/slow-v6
Local car cruise schedule..
http://www.cliffscalendar.com/
|
|
|
10-02-2009, 12:02 PM
|
#14
|
Join Date: Jun 2009
Posts: 38
|
thanks for all the help..it was a bad body ground.
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
|
|