 |
03-04-2012, 09:15 PM
|
#1
|
Join Date: Dec 2009
Location: milltown
Posts: 1,497
|
glyptal 1201
me and my dad are rebuilding a original 454 ls6 for his 68. my dad is toying around the idea of using glyptal 1201 to paint the inside of the engine to help prevent rust on the inside of the motor since it will be sitting for long periods of time. i know this is pretty old school tech and really isnt very popular at all anymore. if anyone has used this stuff or knows anyone that has nows a good time to chime in.
__________________
2002 Camaro Sunset Orange Mettalic, V6, 5spd, bilstein HD shocks and struts, eibach pro lowering kit, eibach f/r sway bars, lakewood PHB, UMI 2 point subframe connectors, energy suspensions poly master bushing kit
daily econobox and first car
1986 IROC-Z, T56, MGW shifter, Heads, Cam, Holley Stealth Ram 350, t-top, tubular LCA with relo brackets, adjustable PHB, belltech sway bars, ground control weight jacks, SLP mid length headers, 3in w/borla XR1, RIP 3 10 bolts, 12.7 @ 109 so far.. atleast its faster than stock  SOLD
1971 Camaro LS3/T56/9in, cam only and still carbed, RIP 2 10 bolts, 11.62@121
03 Blazer 2 door - salt sponge
|
|
|
|
03-04-2012, 09:18 PM
|
#2
|
|
Ayatollah of Rock N Rolla / Admin
Join Date: Mar 2006
Location: Parts Unknown
Posts: 12,573
|
I remember it being used in lifter valleys, head surfaces, and timing areas for oil drainback, not for rust prevention.
What were you planning on painting with it? And why aren't you going to run it for long periods of time? Are you talking years?
|
|
|
|
|
03-04-2012, 09:21 PM
|
#3
|
Join Date: Dec 2009
Location: milltown
Posts: 1,497
|
Quote:
Originally Posted by WildBillyT
I remember it being used in lifter valleys, head surfaces, and timing areas for oil drainback, not for rust prevention.
What were you planning on painting with it?
|
that is the main benefit for using it. but since the engine will sitting alot the enamel will seal it and prevent rusting which is always a good thing.
this car will most likely be handed down to me so i kinda want the engine to last. but ive read some things abt the enamel chipping over time and gunking up the bearings and blahblahblah
the painting will be done with a brush, not aerosol can
__________________
2002 Camaro Sunset Orange Mettalic, V6, 5spd, bilstein HD shocks and struts, eibach pro lowering kit, eibach f/r sway bars, lakewood PHB, UMI 2 point subframe connectors, energy suspensions poly master bushing kit
daily econobox and first car
1986 IROC-Z, T56, MGW shifter, Heads, Cam, Holley Stealth Ram 350, t-top, tubular LCA with relo brackets, adjustable PHB, belltech sway bars, ground control weight jacks, SLP mid length headers, 3in w/borla XR1, RIP 3 10 bolts, 12.7 @ 109 so far.. atleast its faster than stock SOLD
1971 Camaro LS3/T56/9in, cam only and still carbed, RIP 2 10 bolts, 11.62@121
03 Blazer 2 door - salt sponge
|
|
|
|
|
03-04-2012, 09:35 PM
|
#4
|
|
Ayatollah of Rock N Rolla / Admin
Join Date: Mar 2006
Location: Parts Unknown
Posts: 12,573
|
Quote:
Originally Posted by redsoxsstink
that is the main benefit for using it. but since the engine will sitting alot the enamel will seal it and prevent rusting which is always a good thing.
this car will most likely be handed down to me so i kinda want the engine to last. but ive read some things abt the enamel chipping over time and gunking up the bearings and blahblahblah
the painting will be done with a brush, not aerosol can
|
If it rusts on the inside you are storing it wrong, IMO. It's not original so why not run it to cycle the fluids, remove moisture, give the valve springs a break, etc?
Gonna put in DOT5 brake fluid too?
|
|
|
|
|
03-04-2012, 09:39 PM
|
#5
|
|
Admin.
Join Date: Aug 2005
Location: Hamilton, NJ
Posts: 20,153
|
i think it matters not. don't worry about it. if your lifter valley rusts you have bigger issues.
__________________
Vent Windows Forever!
The looser the waistband, the deeper the quicksand. Or so I have read.
Feather-light suspension, Konis just couldn't hold. I'm so glad I took a look inside your showroom doors.
Hey everybody, it's good to have you on the Baba-too-da-ba-too-ba-ba-buh-doo-ga-ga-bop-a-dop
|
|
|
|
|
03-04-2012, 09:41 PM
|
#6
|
Join Date: Dec 2009
Location: milltown
Posts: 1,497
|
Quote:
Originally Posted by WildBillyT
If it rusts on the inside you are storing it wrong, IMO. It's not original so why not run it to cycle the fluids, remove moisture, give the valve springs a break, etc?
Gonna put in DOT5 brake fluid too?
|
the block is original
my dad threw the question out there. if it was up to me id be driving it and starting it up all the time but it isnt my car yet
__________________
2002 Camaro Sunset Orange Mettalic, V6, 5spd, bilstein HD shocks and struts, eibach pro lowering kit, eibach f/r sway bars, lakewood PHB, UMI 2 point subframe connectors, energy suspensions poly master bushing kit
daily econobox and first car
1986 IROC-Z, T56, MGW shifter, Heads, Cam, Holley Stealth Ram 350, t-top, tubular LCA with relo brackets, adjustable PHB, belltech sway bars, ground control weight jacks, SLP mid length headers, 3in w/borla XR1, RIP 3 10 bolts, 12.7 @ 109 so far.. atleast its faster than stock SOLD
1971 Camaro LS3/T56/9in, cam only and still carbed, RIP 2 10 bolts, 11.62@121
03 Blazer 2 door - salt sponge
|
|
|
|
|
03-04-2012, 09:42 PM
|
#7
|
|
Ayatollah of Rock N Rolla / Admin
Join Date: Mar 2006
Location: Parts Unknown
Posts: 12,573
|
Quote:
Originally Posted by redsoxsstink
the block is original
my dad threw the question out there. if it was up to me id be driving it and starting it up all the time but it isnt my car yet |
Wait.
Original to what? That ain't the original engine to a '68 anything. If all you have is an LS-6 block, sell it to a Chevelle guy and use the $$$ to build another engine.
|
|
|
|
|
03-04-2012, 10:24 PM
|
#8
|
Join Date: Dec 2009
Location: milltown
Posts: 1,497
|
Quote:
Originally Posted by WildBillyT
Wait.
Original to what? That ain't the original engine to a '68 anything. If all you have is an LS-6 block, sell it to a Chevelle guy and use the $$$ to build another engine.
|
well yes original to a chevelle, but going in a 68 camaro. the block was free just needed to be rebuilt
__________________
2002 Camaro Sunset Orange Mettalic, V6, 5spd, bilstein HD shocks and struts, eibach pro lowering kit, eibach f/r sway bars, lakewood PHB, UMI 2 point subframe connectors, energy suspensions poly master bushing kit
daily econobox and first car
1986 IROC-Z, T56, MGW shifter, Heads, Cam, Holley Stealth Ram 350, t-top, tubular LCA with relo brackets, adjustable PHB, belltech sway bars, ground control weight jacks, SLP mid length headers, 3in w/borla XR1, RIP 3 10 bolts, 12.7 @ 109 so far.. atleast its faster than stock SOLD
1971 Camaro LS3/T56/9in, cam only and still carbed, RIP 2 10 bolts, 11.62@121
03 Blazer 2 door - salt sponge
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
|
|
