New camshaft selection

[GrandmasterCow]

Hey all, new cam time! Now i have researched some on LS1tech and other sites, anyone recommend a good forced induction cam? Some good choices are as follows:

G5 224 / 230 .581 .572 114
G5X1 228 / 232 .588 .574 114
224"/230" .588"/.595" 114LSA

if anyone else recommends anything let me know. should try to aim for 4-8 degree split favoring the exhaust side, more lift on the intake, and a higher lsa, like 114 +. I'm aiming for 10+psi with about 8.5:1cr .

[foff667]

have you posted in the boosted or internal mods section of tech? There are a few knowledgeable people over there when it comes to cam choices.

[qwikz28]

from what i understand... the cam out of teh 2002 LS6 makes an amazing boost cam. thats probably what they will tell you as well

[Batman]

Why not call a shop and get a custom grind for your specific set-up?

[NJSPEEDER]

or call a cam company and give them the info directly. comp cams, crane, and lunati will all cut a custom cam for you using eitehr your specs or one of their tech people will work with you on the specs. direct from the manufacturers a custom grind is usually only a little more than one of their off the shelf cams

[GrandmasterCow]

yeah i think i'm going to make a call either today or next week see what ic an work out