2001 Camaro z28 with LS3

[01blkz28]

Trans is back and built. Billet servos, 5 pin planetary, Has yank ss3600.

Asking 11k or best offer. Motivated.
Will ship.

Owned since 2012. Have a c6 now so need space.

Made 452 hp and 426 tq on mustang dyno

Tuned and alignment performed by Krazy house customs

Black T-top z28 with SLP SS hood

Chevy bowtie grill insert

Headlights with black inlays.

HID headlights and fog lights.

Added side skirts and rear bumper lip

Body has 155k on it

PA racing chromoly K-member with removable center bar

PA racing upper and lower chromoly control arms

I have a set of new still in wrapping Umi black front lower control arms that can be tossed in as well ($500 new)

Umi front caliper plate.

C5 front brake calipers with new Power stop z26 Steert warrior front and rear brake pads and rotors.

Brake lines from master to abs block to front calipers and to the rear diff were replaced with inline tubes stainless steel brake kit. Rear lines are in back seat.

Qa1 single adjustable struts.

Qa1 single adjustable shocks

Umi drive shaft loop

BMR double adjustable torque arm

Umi upper adjustable strut tower plate.

umi drive shaft loop

Adjustable lower rear control arms.

Double adjustable panhard bar

Upper tubular relocation panhard bar

Tsp 1 7/8 headers to tsp off-road 3 inch to 3 inch mufflex mid pipe to SLP dual dual.

New bosch 13111 front 02 sensors.

Cadi L something motor wit 22k converted to ls3 non vvt engine.

New rings, new cam and crank bearings.

Has 58x crank and 4x cam timing

Lingenfelter box installed for computer to read.

Ls9 head gaskets.

Ls7 lifters.

New trays.

New pushrods.

C7R timing chain

Arp crank bolt

Arp cam bolts

Arp crank bolts.

Arp intake bolts

Lunati valve stem seals

SLP lip to 90 or 92mm 5 wire maf

ls7 coil packs

Ls3 intake

Ls3 knock sensors

Ls3 map sensor.

Ls3 valley cover with front nipple like ls6 cover to oil catch can.

Ls3 timing cover

Ls6 ported oil pump.

Energy poly motor mounts and front sway links.

Front sway bar is a spohn 32 mm chromoly sway bar.

Umi bolt in subframe connectors that 3 bar spider to center on vehicle.

SLP strut tower brace

160 thermostat.

New water pump and under drive crank pulley.

All gaskets were replaced.

Ngk plugs

Pac 1200 series springs

New steel valve locks

New retainers

Trunnion upgrade for rockers

Holley sniper tb 92mm

Holley fuel rails

42lb injectors

236/246 .612/.612 110 lsa

C4 zr1 black rims 17x9.5 in the front and 17x11 in the rear

Rear is stock 10 bolt with 3.42 gears.

Have a trickflow girdle for it

Has a better radiator in it. Can't remember company was done 9 years ago.

Secondary cooler for trans.

Steel braided pump steering pump line kit.

Adapter harnesses are either Kasper or katech. Knock harness, cam harness, 5 wire maf, map harness.

Have a racetronix fuel pump harness that's in the backseat.

Has a walboro 255 Pump. Tank was removed properly and NO fuel pump door cutting.

Ac gets cold and heat gets hot.

Procar sportman series driver seat