|
04-29-2007, 11:25 AM
|
#1
|
11 Second Club
Join Date: Feb 2007
Location: elmer
Posts: 274
|
panhard and lower control arm adjustment ??
should i go with the adjustable or non adj??? and whats the rule of adjustment street/race???
__________________
87 TURBO T-- 02 Z28
|
|
|
04-29-2007, 12:32 PM
|
#2
|
12 Second Club
Join Date: Aug 2005
Location: Toms River,NJ
Posts: 556
|
did you lower your car? Is the RWHP above 420? If the answer is no to the above then there is no need for adjustables.
You need them if you lower your car an 1 inch or more
__________________
2001 10th Anniversary FireHawk #105 of 139
2002 Fbody Nats Elimination Winner
2004 SLP Day Fbody vs Mustang Winner
2006 HP Pontiac Show n Go Elimination Winner
2006 NJFBOA Fbody vs Mustang Eliminaton Winner (Mrs. Bandit driver)
|
|
|
04-29-2007, 12:34 PM
|
#3
|
Join Date: Dec 2005
Location: Mount Holly, NJ
Posts: 242
|
Adjustable LCA's and panhard bars are used to locate the rear both fore and aft and side to side on the vehicle. You usually only need it to make up for a change in vehicle height. You can use the adjustable LCA's together with an adj. torque arm to set pinion angle as well. If you plan to lower the car, you should also get LCA relocation brackets to keep the correct geometry.
__________________
'81 Sport Coupe 229 V6 -Junked
'93 Z28 LT1 - Parting out
"Is that a rat? No, it's just a really fat mouse."
|
|
|
04-29-2007, 03:08 PM
|
#4
|
11 Second Club
Join Date: Feb 2007
Location: elmer
Posts: 274
|
thanks for the replys..no, the car isnt lowered or making that kind of power. but i do have a traction problem w/ this 3200 converter. would using these two things help or a waste of money ?? thanks jeff
__________________
87 TURBO T-- 02 Z28
|
|
|
04-29-2007, 03:17 PM
|
#5
|
12 Second Club
Join Date: Aug 2005
Location: Toms River,NJ
Posts: 556
|
Quote:
Originally Posted by jeff wilson
thanks for the replys..no, the car isnt lowered or making that kind of power. but i do have a traction problem w/ this 3200 converter. would using these two things help or a waste of money ?? thanks jeff
|
You will always have that issue with street tires, I can roast off my Goodyear D3s if I want too. If you do gears, converter or both Kiss any traction you had goodbye unless you use a very soft sticky tire.
__________________
2001 10th Anniversary FireHawk #105 of 139
2002 Fbody Nats Elimination Winner
2004 SLP Day Fbody vs Mustang Winner
2006 HP Pontiac Show n Go Elimination Winner
2006 NJFBOA Fbody vs Mustang Eliminaton Winner (Mrs. Bandit driver)
|
|
|
04-30-2007, 08:51 AM
|
#6
|
Co-Founder / Site Admin
Join Date: Jul 2004
Location: Ewing, NJ
Posts: 22,473
|
A torque arm and LCAs would be better than a panhard bar for straight line traction.
- Justin
__________________
1999 Camry - Beigemobile DD
2002 Suburban - Wife's DD
2004 Grand Cherokee - Not running / Project / Selling?
|
|
|
04-30-2007, 12:54 PM
|
#7
|
Sliderule / Moderator
Join Date: Oct 2004
Location: Catawissa PA
Posts: 2,294
|
I would suggest something like a rear support cover and sticky tires like Nittos DRs. They will give you better traction them stock tires, without killing the rear like a MT or other DR would and they will last a while too.
For the lower control arms, aftermarket could help with traction some, but it's not a cure. just adding them won't fix everything. A torque arm won't probably do the most good. But LCA are still a good upgrade. Unless you plan to run large slicks which would require the rear moved back 1/2" then none adjustable are fine.
For the Panhard, althought it probably adds nothing to traction, it will help center the rear which might be needed it you go with 11" rims/315 tires. If you have plans for a big exhaust ( 4" pipe ) in the furure then look at a Panhard what also has relocation brackets to clear the exhaust.
http://www.bmrfabrication.com/F-bodySuspension.htm
__________________
93Z M6 Black: The 385 Lives! Supercharged, 3-core front mount intercooler, GTP heads, 3:73's, Street twin clutch, Jethot Longtubes, Mufflex 4" catback/spintech, S+W cage, Spohn Suspenion, Yada Yada Yada
1) Build it
2) Race it
3) Break it
4) Repeat!!!
|
|
|
04-30-2007, 01:00 PM
|
#8
|
Join Date: Aug 2005
Location: Millville & Little ferry New Jersey
Posts: 454
|
Quote:
Originally Posted by Pampered-Z
I would suggest something like a rear support cover and sticky tires like Nittos DRs. They will give you better traction them stock tires, without killing the rear like a MT or other DR would and they will last a while too.
|
Thats where I would spend my money 1st with that stall on hard compound street tires you won't have much traction regardless..
I would start with rear tires then build off of that then move on to the rest as needed
__________________
2002 Z/28 = Firemutt Racing 370 w/ Cam, Trick Flow heads, TPIS 90mm Intake & 90mm T.B., Vigilante 3600 t.c., Michael's Transmissions Built 4L60E.
QTP Headers, Mufflex Stainless Y-pipe, Pypes Performance Exhaust, Moser 12-bolt w/ 33 spline axles,Truetrac & 3:73's., Spohn.
Cartek Tuned...
Last edited by ins0mnia24; 04-30-2007 at 01:00 PM.
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
|
|