LT1 Electric Water Pump Wiring

[ar0ck]

I'm trying to re-wire my Meizer Electric Water pump into the Trans Am. I found my original pumps harness, but forgot which fuse slot I ran for the hot power. Everything I wired and grounded is exactly as I had before where the pump came on when I turned the key to accessorie on.

I attached an image of the current fuse box. Just tell me where to stick it.

[Dudbird113]

Probally want to wire into te igntion

[V]

You can go to the hot side of any keyed on fuse. the water pump harness should have its own fuse anyway. just pull whatever fuse you chose and make sure you connect to the batt side, not the circuit side. other wise you'd end up overloading the fuse.

[sweetbmxrider]

I think I used the abs fuse. I did mine through the air pump relay as well. If you have a relay harness, no need then.