Which u-joint girdles?

[camaro2you]

Which ones would work with a ls1 rear end, i know ill have to do some drilling but thats not big deal.

http://store.summitracing.com/egnsea...115+4294842417

[Savage_Messiah]

why not just use the stock ones?

[WildBillyT]

Originally Posted by camaro2you

Which ones would work with a ls1 rear end, i know ill have to do some drilling but thats not big deal.

http://store.summitracing.com/egnsea...115+4294842417

Most of those look like they are for a 1350 yoke, which is not stock. Stock is 1310 IIRC. So they probably won't fit around the u-joint cups.

As far as drilling, don't even think about drilling out the holes on your stock yoke.

[Batman]

I wouldn't touch a stock yoke with a drill, just my .02. use your stockers, there is nothing wrong with them.

[camaroracer1992]

i have the 1350 u joint on my moser rear, i didnt have to drill for the moroso caps. not saying your rear may not require any drilling.

[NJSPEEDER]

stockers will be fine. no need to go messing with the yoke for no performance or safety advantage.