Damn swap meet this weekend! - NJFBOA - Home of New Jersey's Camaros and Firebirds

12secondv6 · 04-24-2006, 01:33 PM

Well... I have been desperately trying to get to ANY track rigth away to spray!

Either the bird wouldn't start or rain said F U james!

So, weather should be decent this weekend... I look at e town's schedule... ******** swap meet!

So, atco is too damn far.

Island here I come.

Anyone wanna join?

Will I pass tech??????? Doubtful.... sigh.

79CamaroDiva · 04-24-2006, 02:16 PM

Quote:

Originally Posted by 12secondv6

Will I pass tech??????? Doubtful.... sigh.

why did they fail you the one time? was it something retarted or is it actually a problem? i might be inspecting sunday.

Savage_Messiah · 04-24-2006, 02:26 PM

mmmmmmmmmayyyyyyyyybe...

GP99GT · 04-24-2006, 05:04 PM

you passed tech last time james...you might this time too. then again youll have the nitrous so they might be more picky

NJSPEEDER · 04-24-2006, 07:22 PM

Quote:

Originally Posted by 79CamaroDiva

why did they fail you the one time? was it something retarted or is it actually a problem? i might be inspecting sunday.

if i remeber correctly it had something to do with no battery hold down and a cracked windshield last time. i don't think he has a DS loop or long wheel studs either

Clutch Master · 04-24-2006, 09:56 PM

if i wasnt working id join ya old man, but who knows it might.........well james knows the word im looking for

12secondv6 · 04-24-2006, 11:25 PM

Well, I have the following:
approved snell 95? helmet
fire jacket
blow down tubes for both bottles
d/s safety loop.

I passed last time out.

I have been given crap for stock length wheel studs and a cracked windshield. Do I really need to have longer wheel studs? I run weld drag lite wheels

79CamaroDiva · 04-24-2006, 11:34 PM

Quote:

Originally Posted by 12secondv6

Well, I have the following:
approved snell 95? helmet
fire jacket
blow down tubes for both bottles
d/s safety loop.

I passed last time out.

I have been given crap for stock length wheel studs and a cracked windshield. Do I really need to have longer wheel studs? I run weld drag lite wheels

yeah, technically the wording in the book is "The thread engagement on all wheel studs to the lug nut must be the equivalent to or greater than the diameter of the stud. Length of the stud does not determine permissibility; length of the engagement between the stud and lug determines permissibility."

Take that as you will.

12secondv6 · 04-25-2006, 08:53 AM

Good lord...... so if I knew how much my lug nuts (from weld) screwed onto my stock wheel studs then I could, in theory, be fine?

I was told because I run weld drag lites I MUST have open ended lug nuts and wheel studs rediculously long. This was just twice though

84HOtransam · 04-25-2006, 09:14 AM

this is how it was explained to me...

say you have 12mm studs- the stud must stick out 12mm from the face of the wheel...weld wheels are thick so you must use longer studs.. open or closed ended lugs dont matter.

79CamaroDiva · 04-25-2006, 11:19 AM

i've always been told they need to be open lugs so they can see the studs. I'm not sure if thats a book requirement or a way to make tech easier so they dont have to make you take a lug off. i run open lugs and extended studs all around on my camaro because my racing wheels are welds too.

12secondv6 · 04-25-2006, 02:09 PM

Sigh, well, I'll give it a shot.

I plan on getting longer wheel studs eventually but the car budget is ZERO now.... I work with what I have

Thank you for the info.... maybe I can drag clutch master along w/ me... I need to make him my bitch at the track and school him in the world of v6>LS1

Tru2Chevy · 04-25-2006, 02:48 PM

FWIW - I thought you passed tech last time because you were N/A, and you told the inspector that it was only your second time at a drag stip and you borrowed a helmet from a friend.

- Justin

Clutch Master · 04-25-2006, 09:59 PM

Quote:

Originally Posted by 12secondv6

Sigh, well, I'll give it a shot.

I plan on getting longer wheel studs eventually but the car budget is ZERO now.... I work with what I have

Thank you for the info.... maybe I can drag clutch master along w/ me... I need to make him my bitch at the track and school him in the world of v6>LS1

NOPE sorry my friend, i got work and im doing my hair that day....

12secondv6 · 04-25-2006, 10:03 PM

Are you skerd?

79CamaroDiva · 04-26-2006, 02:13 PM

Quote:

Originally Posted by Clutch Master

...and im doing my hair that day....

hair? even i don't put hair in front of racing...

12secondv6 · 04-26-2006, 03:32 PM

Paul is....... a pretty boy! He must be manicured, prim and proper, and look all like he is Rico Suave n stuff 24 hours a day?!!?!?!?!?!?!?

He is weird!

12secondv6 · 04-26-2006, 03:33 PM

Quote:

Originally Posted by Tru2Chevy

FWIW - I thought you passed tech last time because you were N/A, and you told the inspector that it was only your second time at a drag stip and you borrowed a helmet from a friend.

- Justin

Rolling up with 2 big nitrous bottles mounted in the trunk area kinda gives it away that it is not my first time to the track!

I don't think I can get away with that again

Tru2Chevy · 04-26-2006, 03:36 PM

Quote:

Originally Posted by 12secondv6

Rolling up with 2 big nitrous bottles mounted in the trunk area kinda gives it away that it is not my first time to the track!

I don't think I can get away with that again

Yea, I'm sure they won't let you slide with that story this time. Melissa is your only hope....

- Justin

Clutch Master · 04-26-2006, 09:58 PM

Quote:

Originally Posted by 12secondv6

Paul is....... a pretty boy! He must be manicured, prim and proper, and look all like he is Rico Suave n stuff 24 hours a day?!!?!?!?!?!?!?

He is weird!

i dont get my nails done like u fag boy, and its hard keeping the ladies off me, ur just jealous cause you cant have me....and we ARE going to atco friday if i have to drag you down there....