Anyone have aluminum stock laying around?

[Savage_Messiah]

need an EGR blockoff plate for my headers but don't feel like buying one (5 or 6 bucks plus shipping), I can get the measurements off my car is anyone can help out, I think it's 1/4 inch think.

Also if anyone has some 1/2 inch-ish thick aluminum then I wanna try a little project with that (poly trans mount = around 1/2 inch shorter than stock v6 mount, shimming with washers is FTL so I wanna try out a spacer)

Thanks for the help...

[unstable bob gable]

You can make an egr blockoff plate using the metal from an old beer can. I'm sure you gotta have a few empties lying around, you drunk fidget!

[NJSPEEDER]

get me a gasket and i can make you one. i have plenty of aluminum laying around.

[Savage_Messiah]

and ironically the headers just happened to come with an egr gasket. I'll get that to you tim, you up for the spacer project too?

UBG I doubt that would work here, as they're only got 1 bolt on top to hold it on, so I think some tin can would just go flappin around

[Draven94blackbird]

i think i got o sheet of 12"x12" aluminum if you want it its your just let me know if you are gona pick it up

[jimmyboy8301]

i have a bunch of old metal laying around the farm.