Where can i get reverse thread bolts?

[thunder]

So yesterday my friend and i put in the 4,11s in my car but when we were pulling the ring off the Posi we didnt realize that the bolts were reverse thread and we snapped of 3 of them before we realized our mistake. so ya where can i pick up some reverse thread bolts and dont say NAPA...

[LTb1ow]

Wow.

I can see breaking one... but three?

Damn.. you don't even qualify for a fail pic.

I would try McmasterCarr or a grangers.

[deadtrend1]

http://www.fastenal.com/web/home.ex

my company deals with a company down here called Guidon

http://www.guidoncorp.com/

oh, and they are called "left handed threads"

[BonzoHansen]

ARP or the dealer for ring gear bolts.

Are you sure you know how to set a rear up?

[thunder]

Originally Posted by BonzoHansen

ARP or the dealer for ring gear bolts.

Are you sure you know how to set a rear up?

Never gonna know if u dont try

[thunder]

Originally Posted by deadtrend1

http://www.fastenal.com/web/home.ex

my company deals with a company down here called Guidon

http://www.guidoncorp.com/

oh, and they are called "left handed threads"

Thanks man

[WildBillyT]

Originally Posted by thunder

Never gonna know if u dont try

I can tell you that right now. Do you know how to set pinion depth, backlash, etc? If not, then the answer is no. If you are not careful that rear will howl like a forest full of angry owls. On fire. And the gears won't last long at all.

I think the ring gear bolts are a specific hardness with a shoulder... might want to get specific ring gear bolts from Jeg's or Summit.

[nj85z28]

Any decent hardware store. the mom and pops place by us carries them

[Whiplash Performance]

Originally Posted by WildBillyT

I can tell you that right now. Do you know how to set pinion depth, backlash, etc? If not, then the answer is no. If you are not careful that rear will howl like a forest full of angry owls. On fire. And the gears won't last long at all.

Along with all the proper tools to setup the rear correctly.

[BonzoHansen]

Originally Posted by nj85z28

Any decent hardware store. the mom and pops place by us carries them

proper grade too? we're talking ring gear bolts here. if so you're hardware store rules

[thunder]

Originally Posted by WildBillyT

I can tell you that right now. Do you know how to set pinion depth, backlash, etc? If not, then the answer is no. If you are not careful that rear will howl like a forest full of angry owls. On fire. And the gears won't last long at all.

I think the ring gear bolts are a specific hardness with a shoulder... might want to get specific ring gear bolts from Jeg's or Summit.

Summit didn't have any left handed bolts already checked. im going to caller the dealership tomorrow see if they have em and then if not ill order of Mcmaster. And im gonna have to check the backlash next weekend. we ran out off time at my friends shop

[nj85z28]

Originally Posted by BonzoHansen

proper grade too? we're talking ring gear bolts here. if so you're hardware store rules

Yea. they do rule. anytime i needed something for my Monte Carlo hardware wise I would go down and match something up.

[V]

http://www.summitracing.com/parts/ARP-230-3002/

not too difficult...

[nj85z28]

beat me to it..

[BonzoHansen]

i'll bet a local speed shop will have them.

[thunder]

Originally Posted by V

http://www.summitracing.com/parts/ARP-230-3002/

not too difficult...

holy crap is that price right? im really beginning to reach a level of ****ed here

[Tru2Chevy]

Originally Posted by thunder

Summit didn't have any left handed bolts already checked. im going to caller the dealership tomorrow see if they have em and then if not ill order of Mcmaster. And im gonna have to check the backlash next weekend. we ran out off time at my friends shop

Sure about that? http://www.summitracing.com/parts/ARP-230-3002/

Jeg's has 'em cheaper, but you'll have to wait a few days until they can ship: http://www.jegs.com/i/ARP/070/230-3002/10002/-1

I hope when you say you are going to check the backlash next weekend that you mean that you are putting off the entire swap until then. If you already installed the gears and are gonna drive it for a week and then go back and correct the backlash, you will most likely have already done the damage to the gears.

- Justin

[thunder]

Originally Posted by Tru2Chevy

Sure about that? http://www.summitracing.com/parts/ARP-230-3002/

Jeg's has 'em cheaper, but you'll have to wait a few days until they can ship: http://www.jegs.com/i/ARP/070/230-3002/10002/-1

I hope when you say you are going to check the backlash next weekend that you mean that you are putting off the entire swap until then. If you already installed the gears and are gonna drive it for a week and then go back and correct the backlash, you will most likely have already done the damage to the gears.

- Justin

Im at school all week anyway. i drove the car half a mile home because he would have gotten in trouble if i left the car at the shop

[r0nin89]

Originally Posted by Tru2Chevy

Sure about that?
I hope when you say you are going to check the backlash next weekend that you mean that you are putting off the entire swap until then. If you already installed the gears and are gonna drive it for a week and then go back and correct the backlash, you will Definately have already done the damage to the gears.

- Justin

Fixed that for your

[Tru2Chevy]

Originally Posted by r0nin89

Fixed that for your

Yea, I was trying to be nice and not dash all his hopes in one shot.

- Justin

[thunder]

Originally Posted by Tru2Chevy

Yea, I was trying to be nice and not dash all his hopes in one shot.

- Justin

Thanks. but I drove the thing a half mile. will that do the trick? seriously

[NJ Torque]

Originally Posted by thunder

Thanks. but I drove the thing a half mile. will that do the trick? seriously

Yes.

[WildBillyT]

Originally Posted by thunder

Thanks. but I drove the thing a half mile. will that do the trick? seriously

Yup.

[r0nin89]

Yeah its not a carb man. You dont try a little more of this, take it around the block and adjust...

If you read up on how to do it its not that hard. I did my first rear with backlash only when I installed a lunchbox locker in my truck 14b. It was a good step towards getting a feel for half of it. I did some more reading and felt comfortable with doing it.

By the time we got around to doing it in school me and my buddy did it in 1-1/2 when it took everyone else 4+ hours. When we were done I realized I had truly wrapped my head around putting them together.

Its the pinion depth thats a bitch though. The gauging blocks to measure the exact depth of the pinion shim you need to use are suppose to be very expensive. Most mechanics and people I know simply use the same depth as the old one, assemble, paint the gears and check the depth with paint then adjust from there.

Seriously just get a book on it and go VERY slow. It took me 3hours til I was confident my backlash was spot on the first time. I did my buddys dana 35 in his jeep a couple months ago and had it together in and hour. Not a single noise out of it and he beats the piss outta it.

[thunder]

So i lucked out. Didnt damage the gears in my 1 mile drive home. car is waiting to be picked up when i end school