| 
| 
	
		|  |  |  
	
	
		
	
	
	
		|  01-21-2011, 07:54 AM | #1 |  
	| Sliderule / Moderator 
				 
                                        
				Join Date: Oct 2004 Location: Catawissa PA 
					Posts: 2,294
				     
                                    
                                 | 
				
				Winter mods?
			 
 
			
			So what's everyone doing to their cars over the winter?
 My car hasn't left the garage since the Nats.  I've been working 7 days a week so I've had little time to determine and fix the issue with it having a miss under load.  I did manage to checked the connection, test injectors, changed plugs adjust valves, still N/G.  So I bought wires, if that doesn't help, I'm thinking opti.
 
 My winter mods are more cosmetic stuff:
 
 I have a set of LEDs (red/green) that tie into the electric water pump so I'll know if it's running or not.
 
 New slotted + drilled rotors and pads.  Part of that install will be polishing the calipers.
 
 Having the headliner redone so there are no holes where the stock seat belts mounted.
 
 Likewise, filling in the holes in the side panels where the rear seat belts were.  CBRMike found me the plastic over the summer for this and I bought the paint and sandless primer from Eastwood that almost a prefect match for the 93s interior.  Having a cage in the car makes this allot more of a project.
 
 Below are plans that I don't have the parts for yet.
 
 If I get the above done before racing starts I want to work on relocating/hiding the wiring harness and fusebox that is currently under the hood to under the dash and relocation the battery to the truck and installing the alk injection where the battery now sits.
 
 I'd like to remove the ABS to make room for a cleaner setup of the supercharger piping.
 
 I have lots of plans and parts, just no time!
 
				__________________93Z M6 Black:  The 385 Lives!  Supercharged, 3-core front mount intercooler, GTP heads, 3:73's, Street twin clutch, Jethot Longtubes, Mufflex 4" catback/spintech, S+W cage, Spohn Suspenion, Yada Yada Yada
 
 1) Build it
 2) Race it
 3) Break it
 4) Repeat!!!
 |  
	|   |   |  
	
		
	
	
	
		|  01-21-2011, 08:01 AM | #2 |  
	| Admin. 
				 
                                        
				Join Date: Aug 2005 Location: Hamilton, NJ 
					Posts: 20,170
				     
                                    
                                 | 
			
			I had a plan...but my back decided it wanted the winter off, so it is delayed.  But I have to call joshie-poo soon.
		 
				__________________Vent Windows Forever! 
 The looser the waistband, the deeper the quicksand. Or so I have read.
 
 Feather-light suspension, Konis just couldn't hold.  I'm so glad I took a look inside your showroom doors.
 
 Hey everybody, it's good to have you on the Baba-too-da-ba-too-ba-ba-buh-doo-ga-ga-bop-a-dop
 |  
	|   |   |  
	
		
	
	
	
		|  01-21-2011, 08:08 AM | #3 |  
	| 
				 
                                        
				Join Date: Dec 2004 Location: Galloway, NJ 
					Posts: 3,964
				     
                                    
                                 | 
			
			I was going to do a manual trans conversion in my car, but I put that on hold since it's beendtoo damn cold outside to do anything, and that car funds are low do to bills. 
 my other project, which seems to be more successful, is my brake upgrade. Only been working on this for 3 years now. I need to get brake lines, and i'm ready to install.
 
				__________________ 
				1996 Camaro C/S - 2/3 Corvette Engine
   
	Quote: 
	
		| 
					Originally Posted by BigAls87Z28  Uh yeah, after they surprized buttsecks us at Pearl Harbor? | 
				 Last edited by Blacdout96; 01-21-2011 at 08:08 AM.
 |  
	|   |   |  
	
		
	
	
	
		|  01-21-2011, 09:23 AM | #4 |  
	| Ayatollah of Rock N Rolla / Admin 
				 
                                        
				Join Date: Mar 2006 Location: Parts Unknown 
					Posts: 12,573
				     
                                    
                                 | 
			
			1.) Fix the timing cover oil leak2.) Fix the high beams
 3.) Put a crossover pipe on the exhaust
 |  
	|   |   |  
	
		
	
	
	
		|  01-21-2011, 09:39 AM | #5 |  
	| 
				 
                                        
				Join Date: Dec 2005 Location: Mays Landing, NJ 
					Posts: 7,108
				     
                                    
                                 | 
			
			Nothing.  Tires right before spring and anything the car needs.  Other than that just drive it until the 148K mile engine decides it wants to go to engine heaven lol
		 
				__________________2018 Camaro 2SS Redline package, ESC Novi 1500 tuned by EFX, Might Mouse wild catch can, GM STB, smoked ZL1 3rd brake light, Xpel XR Black 35% tint all around, Street Scene front splitter, C7 Carbon ZL1 side skirts, Drake Muscle Car Wickerbill spoiler
 
 2010 Infiniti G37x-Moonlight White w/Graphite interior.  Stock...for now.  Xpel XR Black tint(hey it's a mod lol)
 |  
	|   |   |  
	
		
	
	
	
		|  01-21-2011, 10:10 AM | #6 |  
	| Mongo the Meet Coordinator 
				 
                                        
				Join Date: May 2008 
					Posts: 16,941
				     
                                    
                                 | 
			
			I need to wash the dust off my car and figure out what I am doing with the interior at some point.
		 
				__________________ 
	Quote: 
	
		| 
					Originally Posted by KirkEvil  repo bigals turd gen and part it out to a loving home |  |  
	|   |   |  
	
		
	
	
	
		|  01-21-2011, 10:12 AM | #7 |  
	| 
				 
                                        
				Join Date: Dec 2005 Location: Mays Landing, NJ 
					Posts: 7,108
				     
                                    
                                 | 
			
			Oh yeah, I forgot about my interior, gotta do the headliner and sail panel covers.
		 
				__________________2018 Camaro 2SS Redline package, ESC Novi 1500 tuned by EFX, Might Mouse wild catch can, GM STB, smoked ZL1 3rd brake light, Xpel XR Black 35% tint all around, Street Scene front splitter, C7 Carbon ZL1 side skirts, Drake Muscle Car Wickerbill spoiler
 
 2010 Infiniti G37x-Moonlight White w/Graphite interior.  Stock...for now.  Xpel XR Black tint(hey it's a mod lol)
 |  
	|   |   |  
	
		
	
	
	
		|  01-21-2011, 10:13 AM | #8 |  
	| Meet Coordinator 
				 
                                        
				Join Date: Jan 2008 Location: brick/pt. pleasant beach 
					Posts: 19,370
				     
                                    
                                 | 
			
			I have a **** ton of parts overtaking my life. I want to put them on the car sometime this year. I also have a block sitting at the machine shop. Its sturdy like that.
		 |  
	|   |   |  
	
		
	
	
	
		|  01-21-2011, 10:18 AM | #9 |  
	| Mongo the Meet Coordinator 
				 
                                        
				Join Date: May 2008 
					Posts: 16,941
				     
                                    
                                 | 
			
			
	Quote: 
	
		| 
					Originally Posted by sweetbmxrider  I have a **** ton of parts overtaking my life. I want to put them on the car sometime this year. I also have a block sitting at the machine shop. Its sturdy like that. |  Maybe if you show up and put it on an engine stand, they may look at it or something?    
				__________________ 
	Quote: 
	
		| 
					Originally Posted by KirkEvil  repo bigals turd gen and part it out to a loving home |  |  
	|   |   |  
	
		
	
	
	
		|  01-21-2011, 10:23 AM | #10 |  
	| 
				 
                                        
				Join Date: May 2005 Location: under a roof 
					Posts: 2,034
				     
                                    
                                 | 
			
			Jesel shaft rockers, new intake and new carb. I would like to get a throttle stop and delay box and hook up my trans brake but I don't think that will happen before spring.
		 
				__________________1973 Chevy Nova - best e.t.-10.04 - currently disassembled
 1989 Pontiac Trans Am GTA
 2016 Dodge Durango R/T
 2015 Ram 3500 Dually Cummins
 |  
	|   |   |  
	
		
	
	
	
		|  01-21-2011, 10:50 AM | #11 |  
	| Meet Coordinator 
				 
                                        
				Join Date: Jan 2008 Location: brick/pt. pleasant beach 
					Posts: 19,370
				     
                                    
                                 | 
			
			
	Quote: 
	
		| 
					Originally Posted by LTs1ow  Maybe if you show up and put it on an engine stand, they may look at it or something?   |  Maybe you should smash it or something?
		 |  
	|   |   |  
	
		
	
	
	
		|  01-21-2011, 11:24 AM | #12 |  
	| Stalker   
				 
                                        
				Join Date: Aug 2004 
					Posts: 12,083
				     
                                    
                                 | 
			
			Consolidate my fleet to just one, maybe two, locations.
		 |  
	|   |   |  
	
		
	
	
	
		|  01-21-2011, 02:14 PM | #13 |  
	| Power Member 
				 
                                        
				Join Date: Oct 2007 Location: Milford NJ 
					Posts: 1,526
				     
                                    
                                 | 
			
			decoupled toque arm and rear discs  for my 92, maybe sfc's, k-member mods, and front suspension, if i have the time.
 fix the pinion support seal on the 86, and a heat shield for the muffler/fuel tank, if i have time.
 
 havent done much in a month or so, its been too cold, and i've been swamped at work
 |  
	|   |   |  
	
		
	
	
	
		|  01-21-2011, 02:35 PM | #14 |  
	| 12 Second Club 
				 
                                        
				Join Date: Aug 2004 Location: West Milford 
					Posts: 8,373
				     
                                    
                                 | 
			
			
	Quote: 
	
		| 
					Originally Posted by V  Consolidate my fleet to just one, maybe two, locations. |  lol my heart sank for a second trying to imagine this... then i saw the word 'locations' 
 
anywayyyyy
 
vette- i just installed my battery/fuse block cover 
im waiting for warm weather to fix the slight accident damage, parts are here but its too cold, then i have all new c6 zo6 shocks and c6 z51 sway bars to install, need to fix an o2 sensor, and just some general cleaning, thats all i can think of right now
 
camaro- bring it to my trans place and have the massive leak fixed (i guess some seal dried out from only being used twice over the last year), fix a headlight issue, and mmmaaaayyyybbbeeeee a new engine... oh and that stubborn passenger side LCA that i cant get out for the life of me!
 
blazer- keep up on its maintainance.. its at the age where small stuff likes to break!
		 
				__________________88 Camaro
 95 Impala SS
 97 Trans Am WS6
 98 Blazer ZR2
 00 Corvette
 04 CTS-V
 04 Grand Cherokee
 06 GMC Sierra
 07 Sublime Charger Daytona
 12 Tahoe LT
 17 Malibu LT
 
				 Last edited by maroman88; 01-21-2011 at 02:44 PM.
 |  
	|   |   |  
	
		
	
	
	
		|  01-21-2011, 02:39 PM | #15 |  
	| Resident Camera Guy   
				 
                                        
				Join Date: Aug 2004 Location: North Jersey 
					Posts: 10,971
				 | 
			
			Dust mod.
		 
				__________________   |  
	|   |   |  
	
		
	
	
	
		|  01-21-2011, 02:42 PM | #16 |  
	| Admin. 
				 
                                        
				Join Date: Aug 2005 Location: Hamilton, NJ 
					Posts: 20,170
				     
                                    
                                 | 
			
			
	Quote: 
	
		| 
					Originally Posted by //<86TA>\\  decoupled toque arm and rear discs  for my 92, maybe sfc's, k-member mods, and front suspension, if i have the time.
 fix the pinion support seal on the 86, and a heat shield for the muffler/fuel tank, if i have time.
 
 havent done much in a month or so, its been too cold, and i've been swamped at work
 |  that v6 is really gonna hook now.      You need that aluminum thing in my garage.
 
I need to put a front pump seal in my K1500. a lot of freaking work for a $4 seal.
		 
				__________________Vent Windows Forever! 
 The looser the waistband, the deeper the quicksand. Or so I have read.
 
 Feather-light suspension, Konis just couldn't hold.  I'm so glad I took a look inside your showroom doors.
 
 Hey everybody, it's good to have you on the Baba-too-da-ba-too-ba-ba-buh-doo-ga-ga-bop-a-dop
 |  
	|   |   |  
	
		
	
	
	
		|  01-21-2011, 03:15 PM | #17 |  
	| Power Member 
				 
                                        
				Join Date: Oct 2007 Location: Milford NJ 
					Posts: 1,526
				     
                                    
                                 | 
			
			
	Quote: 
	
		| 
					Originally Posted by BonzoHansen  that v6 is really gonna hook now.      You need that aluminum thing in my garage. |  yes it will, and yes i do, but im not ready for an engine yet, and not totally sure on what im using yet.
		 |  
	|   |   |  
	
		
	
	
	
		|  01-21-2011, 03:19 PM | #18 |  
	| 
				 
                                        
				Join Date: Apr 2009 Location: Hillsborough, NJ 
					Posts: 1,099
				     
                                    
                                 | 
			
			Well the original plan was to get the GN into the 11s for spring.
 Well I bought a Formula so that changed the plans, so the plans now are all on the Formula.
 
				__________________ 
				-Devin 
Whiplash Intense Performance 
 Intensify your ride with over 500 name brand Performance parts and accessories!
www.intensewhiplash.com |  
	|   |   |  
	
		
	
	
	
		|  01-21-2011, 04:36 PM | #19 |  
	| 
				 
                                        
				Join Date: Dec 2010 Location: Hillsborough 
					Posts: 956
				     
                                    
                                 | 
			
			I plan on doing a full engine/trans/rear tune-up and then putting on a full exhaust.  Hooker 2055 shorties into a magnaflow catback.
 ~Matt
 |  
	|   |   |  
	
		
	
	
	
		|  01-21-2011, 04:42 PM | #20 |  
	| Hippy Mod, Bergermeister Meisterberger, Moderator 
				 
                                        
				Join Date: Aug 2004 Location: Ewing 
					Posts: 6,216
				     
                                    
                                 | 
			
			
	Quote: 
	
		| 
					Originally Posted by BonzoHansen  I had a plan...but my back decided it wanted the winter off, so it is delayed. |  Welcome to my world!      You are officially old now!  My back is actually doing better this winter, I guess that late season golf paid off!  I was thinking about adding NOS to the snowblower but I may need to upgrade it to a 12 bolt first.    
				__________________69 Z28 JL8 4 wheel disc brakes - being restored
 09 Silverado Z71
 |  
	|   |   |  
	
		
	
	
	
		|  01-21-2011, 05:47 PM | #21 |  
	| Admin. 
				 
                                        
				Join Date: Aug 2005 Location: Hamilton, NJ 
					Posts: 20,170
				     
                                    
                                 | 
			
			Josh has a nitrous setup for a briggs.  We were talking about hopping golf carts lol.
		 
				__________________Vent Windows Forever! 
 The looser the waistband, the deeper the quicksand. Or so I have read.
 
 Feather-light suspension, Konis just couldn't hold.  I'm so glad I took a look inside your showroom doors.
 
 Hey everybody, it's good to have you on the Baba-too-da-ba-too-ba-ba-buh-doo-ga-ga-bop-a-dop
 |  
	|   |   |  
	
		
	
	
	
		|  01-21-2011, 09:08 PM | #22 |  
	| 
				 
                                        
				Join Date: Apr 2006 Location: Point Pleasant 
					Posts: 1,809
				     
                                    
                                 | 
			
			O my evil never ending lists.... 
87 k10 trail truck: 
-Square tube rockers 
-Dual Tri 4 link rear 
-New 14 bolt Full floater 
-Redo my tube bed 
-Rock sliders 
-Clean frame rust and paint it
 
86 Olds 442: 
-Finish fixing my floor 
-POR15 the floor 
-Finish fixing the body rot, do that body work 
-Pull doors off one at a time and make them have corners again  
-Put in new carpet 
-Put in new sunroof 
-Put in new buckets 
-Install new rear speakers 
-Build my 383 vortec 
-Pull the 307 
-Install 383 
-Actually drive it
 
1999 Stratus: 
-New tires 
-Motor/trans mounts 
-Timing belt     
This thread just depressed me...
		
				__________________-Vinnie
 
 94 2wd SBSC Gmt400. 330CI LSX, Fast 102, Trickflow 205s, close ratio nv3500, 4.30/trutrac.
 |  
	|   |   |  
	
		
	
	
	
		|  01-22-2011, 09:02 AM | #23 |  
	| 11 Second Club 
				 
                                        
				Join Date: Feb 2006 
					Posts: 932
				     
                                    
                                 | 
			
			Main thing.. Pay off implant loan................ for dental implants    lol
 
Vert - Look at it. No garage + too damn cold = no work on it. Tho I need to get a new top and weather stripping for it.
 
GTO - Same as above. Oh might gather parts to redo the rear suspension on it and finish the coil over kit on the front of it.
		
				__________________2004 GTO GMM shifter Spohn stuff, tint and my love......
 1988 Camaro Vert -Sold
 |  
	|   |   |  
	
		
	
	
	
		|  01-22-2011, 09:05 AM | #24 |  
	| 
				 
                                        
				Join Date: Dec 2005 Location: Mays Landing, NJ 
					Posts: 7,108
				     
                                    
                                 | 
			
			Kat the 'vert still needs the driver mod doesn't it?   
				__________________2018 Camaro 2SS Redline package, ESC Novi 1500 tuned by EFX, Might Mouse wild catch can, GM STB, smoked ZL1 3rd brake light, Xpel XR Black 35% tint all around, Street Scene front splitter, C7 Carbon ZL1 side skirts, Drake Muscle Car Wickerbill spoiler
 
 2010 Infiniti G37x-Moonlight White w/Graphite interior.  Stock...for now.  Xpel XR Black tint(hey it's a mod lol)
 |  
	|   |   |  
	
		
	
	
	
		|  01-22-2011, 09:09 AM | #25 |  
	| 11 Second Club 
				 
                                        
				Join Date: Feb 2006 
					Posts: 932
				     
                                    
                                 | 
			
			   My bad runs are still faster than you've gone down the track.    
				__________________2004 GTO GMM shifter Spohn stuff, tint and my love......
 1988 Camaro Vert -Sold
 |  
	|   |   |  
	
		
 
  
	
	
	
	
	| 
	|  Posting Rules |  
	| 
		
		You may not post new threads You may not post replies You may not post attachments You may not edit your posts 
 HTML code is Off 
 |  |  |  | 
 |  |