|
2000 Trans Am WS6 cammed/bolt ons 89K
As much as i don't want to sell it i don't have a choice at this point.
My 2000 Trans Am WS6 Cammed with bolt ons. It has 89,000 original miles. Below is a list of what the car has. It is very quick. 11.9@114mph 1.72 60ft
comp custom grind cam .591 .601 lift 115 lsa
LS6 intake
36LB red top injectors
80mm polished TB
85mm carbon style air lid
85mm vette maf
asp 25% under drive pulley
hooker ceramic long tubes
3" stainless y-pipe with gutted cats
Built 4l60e level 4 specs. red clutches, wider 2-4 carbon band, billitt servos, shift kit, beast sunshell, 5 pinion planetaries front and rear.
(OD not working right now, but all other gears work perfect) easy fix. the billitt 4th gear servo needs to be rebuilt with a longer pin installed) Will fix for the right buyer.
PT 4400 stall convertor
10 bolt rear with torsen posi, 3:73 gears, T/A rear diff support cover.
UMI double adjustable torque arm
one way adjustable trailing arms
3 way rear drag shocks, stock springs
Front hal 12 way adjustable shocks with 150# springs
no front sway bar
triple pillar gauge pod with aem wideband 02 and a autometer electric fuel pressure gauge that is not hooked up
weld draglites (XP) 15x 3.5 with kuhmo tires rated for 140mph that have 95% tread Rears 16x9 with 11.5 mickey thompson et streets 50% tread
stock 17x9 ws6 wheels with ks evo 2 tires in the front and worn mickey thompson et street drag raidials in the back(also have extra et street drag radials with 80% tread)
Tuned with efi live which was done by me.
I have the front plate cover and t-top shades
If the interested buyer offers me close to what i am asking i will include the drag wheels, the efi live, and a stainless offroad y-pipe i have laying around.
The flaws: A headlight cover is out of alignment because one of the mounting tabs is broken. To fix you'll have to replace the headlight bucket.
The car has light scratches, a few dings in the quarters and a paint chip out of the nose. some very small paint chips around the rest of the nose.
Some clearcoat is coming off the hood.
I have never been in an accident with it.
The usual driver side seat bolster wear
the passenger side seat belt guide is broken
the carpet has some staining in it. Mostly behind the driver seat.
The title comes back clear. I have the title in hand.
11.5 O/BO
__________________
Bolt ons and cammed....
Last edited by MattysTA; 07-24-2013 at 06:58 AM.
|
