 |
07-28-2006, 08:07 PM
|
#1
|
14 Second Club
Join Date: Jul 2005
Location: Denville, New Jersey
Posts: 93
|
Anyone have electric cutouts?
I just got my cutout installed(sounds amazing) and the electric part is in the mail.
I was curiuos to see how and where, someone who installed one, ran the wires?
__________________
1995 Silver Firebird Formula A4
-Harwood Ram Air Hood
-SLP Ram air intake
-Flowmaster Catback
-160 Degree Thermo
-Corvette Replica C5 rims 17x9.5
-Drilled Rotors
-MSD Cap, Rotor, and Coil
|
|
|
07-28-2006, 09:18 PM
|
#2
|
Join Date: Aug 2004
Location: Somerset County
Posts: 5,559
|
wheres the cutout located? mine was right before the axle so i wired the e-cutout up through the rubber grommet below the passenger back seat, and under the carpet to the driver side kick panel, and up to the lower dash to the switch.
__________________
1999 Corvette FRC
|
|
|
07-28-2006, 09:41 PM
|
#3
|
13 Second Club / Moderator
Join Date: Jan 2005
Location: Franklin Lakes, NJ
Posts: 8,694
|
transam4life works for QTP and know a good way to wire up a e cutout through the floor. contact him if you are having trouble.
__________________
Quote:
Originally Posted by LS1ow
Except Jersey mike, great kid, but the way he looks at me makes me feel like im in danger
|
|
|
|
07-28-2006, 10:35 PM
|
#4
|
14 Second Club
Join Date: Jul 2005
Location: Denville, New Jersey
Posts: 93
|
mines in the same location before the axle, i haven't been under the car to check for grommets but now i know where to look.Thanks
__________________
1995 Silver Firebird Formula A4
-Harwood Ram Air Hood
-SLP Ram air intake
-Flowmaster Catback
-160 Degree Thermo
-Corvette Replica C5 rims 17x9.5
-Drilled Rotors
-MSD Cap, Rotor, and Coil
|
|
|
07-28-2006, 10:41 PM
|
#5
|
Join Date: Aug 2004
Location: Somerset County
Posts: 5,559
|
Quote:
Originally Posted by 95formula
mines in the same location before the axle, i haven't been under the car to check for grommets but now i know where to look.Thanks
|
Yea, if you were sitting in the seat there is one grommet directly at your butthole and a second one right inbetween where your feet are
__________________
1999 Corvette FRC
|
|
|
07-29-2006, 12:02 AM
|
#6
|
Resident Camera Guy
Join Date: Aug 2004
Location: North Jersey
Posts: 10,971
|
J0n is correct, I ran my wire up through the center console into my ash tray. Theres power & ground running to an interior light in your center console that is only on when your lights are on. Since i have manual head-lights I just turn them on to driving lights and open up the cut-out.
My new set up will always be on when the cars on, but on my switch panel.
__________________
|
|
|
07-29-2006, 01:42 AM
|
#7
|
10 Second Club
Join Date: Aug 2004
Location: Eastampton
Posts: 4,466
|
I would highly reccommend(sp) not buying a QTP electric cut-out. I have had nothing but problems with the bolts holding the butterfly plate on sheering. Mine has broken 5 times, my roommates has broken 3 times, my friend's has broken a few times. You get the idea. I'm sure some of them are good though.
__________________
1999 MBM T/A - the new ride 
2004 CE Corvette - 1.410 - 10.246 @ 133.39
2003 Silverado - Lifted 6 on 35s
2000 T/A WS6 - 11.190 @ 119.79...SOLD
|
|
|
07-29-2006, 12:37 PM
|
#8
|
Resident Camera Guy
Join Date: Aug 2004
Location: North Jersey
Posts: 10,971
|
You may say that I cheated and used the best parts to build mine, but mine has been working for about 5 months straight with constant abuse. I also just upgraded from the standard toggle switch to the new electric controlers.
__________________
|
|
|
07-30-2006, 01:46 AM
|
#9
|
10 Second Club
Join Date: Aug 2004
Location: Eastampton
Posts: 4,466
|
Quote:
Originally Posted by TransAm4Life
You may say that I cheated and used the best parts to build mine, but mine has been working for about 5 months straight with constant abuse. I also just upgraded from the standard toggle switch to the new electric controlers.
|
I think I just need titanium hardware for the butterfly then I'll be good lol
__________________
1999 MBM T/A - the new ride 
2004 CE Corvette - 1.410 - 10.246 @ 133.39
2003 Silverado - Lifted 6 on 35s
2000 T/A WS6 - 11.190 @ 119.79...SOLD
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
|
|