custom koni alum coilover/ various springs

[198esp1]

Im selling some parts to get ready for the spring. A front pair of custom koni coilover I had built about 4 years ago. The have the koni yellow SA valving in them. Koni can put any valving you want in them drag race, autocross or road race, The shocks are several pounds lighter than the typical steel koni with a ground control coilover setup. new they cost around 600. Also have a couple of spring sets. every thing listed is in excellent shape except the rear koni's the should be sent in for a rebuild. Aluminum konis are 3rd pic down

Aluminum konis wo springs 300.
eibach 550lbs 10/2.5 (same rate as strano spring )50.
hypercoil spring 850lbs 10/2.5 75.00
afco rear 5in 22lbs spring 40/obo
rear koni SA (need rebuild ) 50/obo

[198esp1]

bump for some nice shocks

[198esp1]

rear konis are sold
rear afco springs sold
front hypercoil 850lb sold

[creeper]

I've always wondered, how much noise do those front shocks make with that style upper mount?

[198esp1]

Originally Posted by creeper

I've always wondered, how much noise do those front shocks make with that style upper mount?

my car is pretty loud so I realy could not say. the bearings on the shocks are always loaded either compresion or rebound so I dont think they would be nearly as loud as say a lca that is just floating when the car is not under a braking or accel. The konis were some of the best money spent on the car.

[MonmouthCtyAntz]

Whats the drop on the rear springs if its an inch ill take them.....

[198esp1]

Originally Posted by MonmouthCtyAntz

Whats the drop on the rear springs if its an inch ill take them.....

The rear springs were a 11inch tall spring w/no pig tail to use the rear you need to weld in a new mount on the rear or weld in a weight jack. But the rear springs are sold sorry

[198esp1]

ttt