Mixed bag of 1st gen, 4th gen stuff for sale

[JL8Jeff]

Funds got a little tight all of the sudden so I could use a little extra cash. Feel free to make an offer on anything listed and I can get some pictures as long as my camera hangs in there.

-LS1 power steering reservoir(brand new GM) $25
-94-96 Impala SS/Caprice power steering hose(brand new GM) $70
-GM 24 lb injectors for LT1(used but a great upgrade for 93's) $60
-K&N 3" tall air filter for old 4 bbl setups(new) $30
-Holley chrome air cleaner for 4 bbl(used but nice) $15
-Pro-form chrome air cleaner for 4 bbl(new) $25
-chrome thermostat housing older style small block(used) $10
-67-69 Camaro chrome radiator support bars(used) $15
-TH350 tranmission with torque converter(sitting for years so needs a rebuild or seals most likely) $100
-67-69 Camaro small block fan shroud(small chip out of corner)$25
-Catco 2-1/2" catalytic converter(new) $40
-Hidden hitch trailer hitch for 4th gen F-body with draw bar $75
-Stock 96 SS exhaust manifolds(might be extrude honed) $50
-Stock 96 SS dual cat y-pipe(had approx 1" cut off end) $50
-4th gen new charcoal cannister for EVAP system(AC Delco) $40
-Palm M100 handheld with OBDII connector and software to scan engine while running and read/erase SES codes(OBDII only) $125
-Mastercraft 275/40/17 tire with lots of tread $75
- GM style weatherpack 4 wire connectors(4 male, 4 female) and crimping tool(these don't connect to GM connectors but you can make your own harnesses with them) $60

Send me an email or PM for more details.

[camaro2you]

any pics of the scanner?

[JL8Jeff]

[camaro2you]

ill talk to my dad and see if he wants to take it off ur hands i should know by tomorrow night.

[slayerxxx213]

If camaro2you doesn't go for the scanner i would be interested in it....

[JL8Jeff]

Whoever comes up with the cash first is welcome to it.

[WildBillyT]

Jeff, are you selling any other first gen stuff?

[JL8Jeff]

The only extra 1st gen stuff that I know I have is the grill stiffener for the upper part of the 69 grill. I don't know what else is going to be left over until my car is done.

[69RSZ]

Jeff,im looking for 68 Z/28 stuff,lmk if you have anything or know who might be selling a cowl plenum setup for a 68Z with the air pump indentation in front. Its a non RS car.also looking for a dated air pump setup with the exhaust manifolds and all the pipeing and hoses.whew!

[JL8Jeff]

I still have all this stuff for sale and could use some cash.

[camaro2you]

sorry for the long delay on getting back still got the scanner or no?

[JL8Jeff]

Yes, I still have the Palm scanner setup.